This manufacturer-approved Refrigerator Pantry End Cap Kit, also known as the Refrigerator Drawer Support, is a kit containing all parts of the Pantry End Cap. It snaps into place on the appliance’s ...
This water filter purifies water going to the water dispenser and sometimes the icemaker as well. This part should be replaced if it is causing reduced water flow or just replaced periodically per the...
This OEM Center Rail is a white plastic part which supports the crisper frame, which holds the crisper. Fifteen inches long and white in colour, if broken, the support may no longer hold properly. Re...
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This light switch may also be known as a refrigerator door switch or a light switch kit, and is compatible with your refrigerator. The function of the refrigerator door switch is to turn on the light ...
This is a replacement pivot block for your refrigerator. It is made of white plastic and is approximately 4 inches long and 1 inch wide. The pivot block catches and holds the door mullion cover when y...
Sold individually. This door bin is for refrigerators.
Door bin attaches to the inside of the refrigerator door and typically holds jars and bottles.
Follow the instructions in the owner's manua...
$69.88
In Stock
Questions And Answers for MFI2570FEZ07
Ask our experts a question about this model and we'll get back to you as soon as possible!
7 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Michael
February 3, 2024
compartment led lights flicker at a high freqencey . Need to repair or replace led bulb
For model number MFI2570FEZ07
Hello Michael, thank you for getting in touch. The LED light module, part number PS16555201, can not be repaired. You may need to replace it to fix the issue. Glad to be of assistance!
Hello Shelli, Thank you for your inquiry. To remove the drip tray, pull out on it slightly until it reaches the stopping point and then lift it up and continue to pull it towards you to fully remove it. We hope this helps.
My ice maker is making ice but it won't dispense through the door when we push the ice lever. We've cleared the chute and the motor runs to move the ice but nothing comes out. We taken the whole ice container out to see if something is jamming it and there's nothing that looks out of place. In order to get ice, we have to pull it out and use our hands. Any info would be appreciated. Thanks!
For model number MFI2570FEZ07
Hello Brenda, thank you for your question. We recommend replacing the Ice Door and Chute Module Kit part PS11753582. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
Hi Deb, thank you for the great question. To reset the ice maker, first, make sure the ice maker arm is not stuck. If it is, push it down so it knows to keep working. Otherwise, check for a reset button on the ice maker and hold it down for 10 seconds. You can find the reset button at the bottom of the ice maker. Remove the ice tray to locate it. If that does not work, turn off and unplug the ice maker for up to 15 minutes for a hard reset. If the ice maker does not have a reset button, restart the refrigerator by unplugging it at the mains and then plugging it back in. We hope this helps.
Was this helpful?
Thank you for voting!
Mike
November 18, 2022
Light is dim
For model number MFI2570FEZ07
Hello Mike, thank you for your question. If your refrigerator light is dim then the issue is probably with the Module, part number PS16731134. If that does not take care of the issue, then the problem is most likely to be related to the Door Switch, part number PS12731166. If you require assistance to place an order, please contact customer service. We hope that helps!
Pressed in the end of the filter cover, lowered it down part way. Twisted the old filter 1/4 turn and removed it. Set in the sink to drain. Inserted new filter and twisted it to lock. closed cover. Done. Total time @ 1 Minute.
Removed the fruit & veggie drawers & the deli (pantry) drawer. Took out the 3 screws, removed the attached parts, put them on the replacement part, reattached it and put the drawers back in.
Here's the part I want to share: PartSelect had a expanded diagram showing the correct part and sufficiently detailed to figure out the repair before the part arrived. That's why I ordered from them. Secondly, I ordered the part Thursday morning--and the thing was sitting on my porch when I came back in from my evening out Saturday--2 days later!!!
Remove food off of lower shelf, remove the two produce drawers, remove large lower drawer, remove glass shelf, remove three screws holding end cap in place. Once end cap was removed the drawer track could be removed and placed on new end cap. Installation of new end cap took less than 5 minutes. Most of the time spent was removing/replacing food and cleaning the shelf/bins. PartSelect was awesome BTW!