This water filter purifies water going to the water dispenser and sometimes the icemaker as well. This part should be replaced if it is causing reduced water flow or just replaced periodically per the...
This an authentic OEM 40-Watt replacement light bulb, used in a number of household appliances. It is specially designed to withstand extreme temperatures, which is why these replacement bulbs are mos...
Glass and centre support is NOT included. Must be ordered separately. This frame along with the glass provides the crisper drawer for fresh storage of vegetables
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This drawer slide rail cover is for refrigerators.
Drawer slide rail cover is a decorative trim that covers the slide rail.
Wear work gloves to protect your hands when installing this part.
Sold individually. Crisper drawer is an original equipment manufacturer (OEM) part that fits some bottom-freezer Kenmore, Amana, Crosley, Jenn-Air, KitchenAid, Maytag and Whirlpool refrigerators.
T...
Ask our experts a question about this model and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Norm
August 17, 2023
Fridge was starting and display lit Now no display and not running
For model number MFI2269VEM7
Hi Norm, thank you for reaching out. Based on the description that you have provided, we would recommend replacing the electronic control board, part number PS11752593. We hope this helps, good luck with this repair!
I had a power outage. My fridge did not come on after I replaced the main board. The fridge came on and worked fine except for the icemaker and the water dispenser. If I try to use them they just beep and it’s not making ice
For model number MFI2269VEM7
Hello Gerald, thank you for reaching out. Based on the description that you have provided, the issue is most probably with the dispenser control board, part number PS10060177. It controls water and ice dispenser operations in the refrigerator door. You may need to replace it to fix the issue. We hope this solves your problem!
The water dispenser makes a vibrating sound when dispensing water. I've tried changing filter but it seems like the seal on the filter isn't tight enough and vibrates when dispensing.
For model number MFI2269VEM7
Hi Mark, you may want to try to replace the water filter cover/housing or the water inlet valve. Thank you for your question and good luck with your repair!
Light on in fridge ,control panel lights up when yo press a button and goes out when you release it.
For model number MFI2269VEM7
Hello John, thank you for getting in touch. According to our research, the issue is with the dispenser control board, part number PS10060177. We recommend you replace this board to fix the problem. We hope this helps!
Pressed in the end of the filter cover, lowered it down part way. Twisted the old filter 1/4 turn and removed it. Set in the sink to drain. Inserted new filter and twisted it to lock. closed cover. Done. Total time @ 1 Minute.
I knew the chances of all the freon leaking out was unlikely so I looked at the wiring to the compressor and there was a capacitor and a starter/overload so i figured I would start there. I went on line and found the parts at this site and they were less than the minimum service call charge for a service tech so I figured what the heck let's give her a shot so I did give it a shot. I ordered the parts and they were there in less time than a service tech could come out and i installed the parts and guess what for 90.00 in parts and 15 minutes in time I repaired my refrigerator. Thanks guys, It took less time to order the parts than it did to make the repair so thanks, your website rocks and is very well designed so my hat is off to you guys!