The fold away tine pivot or clip holds the tine rows in place. This part is made of gray plastic and is approximately 3 and a half inches in length. Some dishwasher models will have fold away tine row...
This part is essential in your dishes getting clean during the wash cycle. If there is any debris or a tear in the filter, it can cause extra buildup and, therefore, causing dirty dishes.
This inner door insulation seal is almost twenty-four inches long. It is gray in color and is made of a foam material.
$46.26
In Stock
Questions And Answers for MDB8600AWW
Ask our experts a question about this model and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jacqueline
March 29, 2023
How old is this dishwasher?
For model number MDB8600AWW
Hello Jacqueline, thank you for contacting us. Based on our research, your unit was most likely manufactured in 2004. For a more accurate result, we will need the serial number. We hope this information helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Jacqueline
March 30, 2023
What is the size of this dishwasher
For model number MDB8600AWW
Hello Jacqueline, thank you for reaching out. We have found that the width of your dishwasher is 24 inches, the depth is 24 3/8 inches, and the height is 35 1/4 inches. We hope this information helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Jacqueline
March 30, 2023
How old is dishwasher and the overall size of dishwasher. Please
For model number MDB8600AWW
Hello Jacqueline, thank you for contacting us. Based on our research, your model was manufactured in approximately 2004. To get the exact manufacturing date, please provide us with the complete serial number. The dimensions of your model are width: 24 Inches, depth: 24 3/8 Inches, and height: 35 1/4 Inches. We hope this information helps!
Was this helpful?
Thank you for voting!
Charlotte
October 7, 2022
The door handle is cracked in 2 places. Not sure if I have to replace whole door, or if I can replace handle
For model number MDB8600AWW
Hello Charlotte, thank you for your question. The door handle, part number PS11748729, will fit your model number MDB8600AWW. If you have any follow-up queries, please feel free to reach out to customer service, we are available seven days a week. Glad to be of help!
The hardest thing was figuring out that you only need to purchase the latch handle because it only comes as a complete latch assembly, why they even list the latch assembly as a separate part in the parts list stupid. (you get the handle and latch already put together and it cost less than the latch assembly without the handle). Anyway all you need to do is disconect the power from the dishwasher (unless you like to live dangerously like me) take your drill with the correct size torx bit and remove all the screws on the inside door pannel (the top center two screws actually hold the latch assembly in place). Disconect the 4 wires from the old part and reconect them to the new part and reinstall all the torx screws being careful not to strip the plastic threads that they screw into if you are using a drill. Whole process takes less than 5 minutes. I am surprised that Maytag used such a flimsy handle assembly in their dishwashers since they are supposed to have the repair men with the most time on their hands. They probably sell just as many handle assemblies as they do dishwashers that have this particular part in it, probably more since you will probably have to change it 2 or 3 times during the life of the unit.
I Followed others' instructions already posted to replace the whole handle assembly. In particular, use a big screwdriver placed against the bottom of the handle and whack the grip with the palm of your hand to get the handle to move back to the open position so you can open the door and start the job. I am no handyman, but this fix was easy, about 30 minutes in all, most of which was spent figuring out which breaker to pull so as not to get shocked. One note of caution: use the correct screwdriver attachment (not a Phillips head or regular, but a star or something- see I am not a handyman but I do have a $15 screwdriver set that just paid for itself 10 times over!).
Remove the 8 or 9 torx screws holding the inner and outer door assembly together (leave the bottom screws in), lift the old handle assembly out, transfer the switches to the new handle assembly, and reassemble door.