This is a replacement mullion rail for your French door-style refrigerator. You will typically find the mullion rail on the left side refrigerator door. The mullion rail helps to keep the refrigerator...
$208.63
In Stock
Order within the next 9 hrs and your part ships today!
The Water filter reduces contaminants such as lead, iron, and chlorine from drinking water. This OEM filter is a genuine part manufactured by LG for use in refrigerators. We recommend you replace eve...
$103.34
In Stock
Order within the next 9 hrs and your part ships today!
This handle screw, also known as a mounting bolt, is a mounting screw to help secure the door handle to your refrigerator door. If your handle is loose, you may just need to tighten the screw. If your...
$11.92
In Stock
Order within the next 9 hrs and your part ships today!
This wiring harness is 20 pin and 3 pin. Replacement ice maker for LG refrigerators. The ice maker assembly contains the mold to form ice and the ejection controls to fill the ice storage bin. Unplug...
$433.38
In Stock
Order within the next 9 hrs and your part ships today!
This is a manufacturer-approved refrigerator door closure for your refrigerator. It is made of white plastic and measures approximately 3 inches by 2 inches. If your old closure is damaged, your refri...
$29.12
In Stock
Order within the next 9 hrs and your part ships today!
Questions And Answers for LFXS28968S
Ask our experts a question about this model and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
William
December 22, 2023
Ice Maker Code IFE has appeared on Refrigerator Door. Test mode carried out, the Ice Tray appears to rotate fully however the ice Tray looking at it in position appears out of alignment does this mean replacement of the whole item or can I re-align?
For model number LFXS28968S
Hi William, thank you for the question. Based on our research, the error code IFE indicates that the ice maker fan motor is not spinning properly. We would recommend checking the evaporator fan blades for any damage. If this is not the issue, we would suggest replacing the evaporator fan motor, part number PS12383671, to solve the problem. The icemaker tray may appear level or with a slight tilt. The change in position is to assist in the freezing process. Glad to be of help!
When dispensing ice or water the switch stays open and ice or water will continue to flow until you open the door and or switch between ice, water crushed ice several times.
For model number LFXS28968S
Hi Michael, thank you for getting in touch. We have researched and found that you probably have a defective micro switch, part number PS3529276. It controls dispensing of ice or water when you press the dispenser lever. You may need to replace the micro switch to fix it. We hope this helps, good luck with this repair!
1. Shut off water to refrigerator. 2. Removed bottom sheet metal cover (6 screws). 3. Removed leaking water inlet valve assembly from refrigerator (1 screw). 4. Remove water inlet tube (loosen nut) and tube back to refrigerator (pull from water valve after remove cotter pin washer). 5. Detach two electrical wire harnesses. 6. Install new water inlet valve assembly to refrigerator (1 screw). 7. Replace both water tubes to water inlet assembly. 8. Re-attach both wiring harnesses. 9. Turn water to refrigerator on. 10. Check for leaks. 11. Re-attach bottom sheet cover (6 screws).
Had to buy the entire door mullion because the spring broke, wasn't happy. Got the new part very quickly and it was a new replacement part number. Somewhat tentative. Took it out of the box and looked it over. No spring! Groan! Thought I got the wrong part. Flipped the bottom hinge and it snapped open, no need for a spring! Two screws, disconnect the wire harness, throw away the old, get new, connect the wire harness, connect hinges, put in two screws! Super easy. Watch the video for some pointers along the way.