This grey OEM dishwasher tub gasket is a 73" grey rubber part that creates a seal around the dishwasher to prevent any water leakage during a cycle. If it's damaged or broken, you'll start seeing wate...
$47.19
In Stock
Order within the next 8 hrs and your part ships today!
The single rack roller kit comes with one axle/clip and one wheel/roller. The rack wheel is designed to allow the rack of your dishwasher to roll in and out. If the rack will not complete this task, o...
$8.76
In Stock
Order within the next 8 hrs and your part ships today!
This door seal is for dishwashers.
Door seal seals the gap between the opening to the dishwasher tub and the outer edge of the door.
After installing the door seal, shut the dishwasher door and ...
$41.19
In Stock
Order within the next 8 hrs and your part ships today!
This plastic cover and stem assembly helps hold the lower spray arm in place.
$39.46
In Stock
Order within the next 8 hrs and your part ships today!
Questions And Answers for LFID2426TF4A
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Charlene
May 12, 2023
The wash, clean & sanitized lights are all three flashing and I can't start my dishwasher. What replacement parts will fix this?
For model number LFID2426TF4A
Hi Charlene, thank you for the question. Based on the description that you have provided, we would recommend checking the control board, part number PS16661027, as it is most likely faulty and may need to be replaced. We hope this solves your problem!
What are the dimensions of this model?. Mine needs replaced and I want to make sure I get the right size
For model number LFID2426TF4A
Hi Charles,
Thank you for your question. The depth including the handle is 28 inches. Without the handle the depth is 25 inches. The width is 24 inches. The height is adjustable. The maximum height is 35 inches the minimum height is 33.5 inches. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Leann
September 5, 2023
Only 2 1/2 years old. Runs but no water will come in.
For model number LFID2426TF4A
Hi Leann, thank you for reaching out. First, make sure your dishwasher does not have an incorrectly positioned drain hose and the water supply is turned on. Confirm the door is fully closed; the dishwasher will not fill the water with the door open. Remove anything that is obstructing the door. If this does not help, we recommend replacing the float switch, part number PS3492842. Glad to be of help!
I removed old tub gasket, which the door presses against to make a seal, and put the new one in. Flat tip screwdriver was used to gently press gasket in.
I looked under and found that 2 brass nuts that secured the heater element through the base housing of the dishwasher has split down each side of the nut and no longer was tight enough to keep water from leaking around either end of the heater element. I powered down the dishwasher at the circuit breaker and then reached under the dishwasher and pulled away the 2 wires that were attached to each side of the heater element. I removed the two nuts and replaced them with the parts I ordered from partselect.com. I then put the appropriate wires back at the end of the heater element and ran the dishwasher to check for leaks. No leaks... it was fixed.
