This OEM refrigerator filter is for french door and side-by-side door types and is located in the back, top-right of your appliance. By absorbing heavy metals, pharmaceuticals, pesticides, chlorine, a...
Crisper cover with glass works with some Frigidaire, Electrolux, White Westinghouse, and Tappan models of fridges.
This is a genuine OEM part that works for some models of Frigidaire, Electrolux, W...
This door gasket is for the freezer door on the refrigerator. The gasket is grey in color. This part is approximately 34-1/2" wide x 24" long. The door gasket is on the inner door panel and creates a ...
Sold individually.
This is a genuine part. The handle mounting shoulder screw (no.10 ab) is made for use with many refrigerators. The metal screw helps to fasten the handle assembly to the outer do...
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Candice
December 11, 2019
Frost and icicles forming in freezer. Frost is on food and ice trays, between fridge and freezer icicles are dripping. Temps set 0° freezer, 37° fridge.
For model number LFHG2251TF0
Hello Candice, thank you for your question. If there is frost build up between the fridge and freezer there are a few parts we would recommend testing. The defrost heater PartSelect Number: PS2369212, THERMOSTAT PartSelect Number: PS12729016, temperature sensor PartSelect Number: PS1765215 and the evaporator fan motor PartSelect Number PS11775846. I hope this helps!
Was this helpful?
Thank you for voting!
Craig
February 11, 2020
I need two door bins as we bought a model that doesn't have the water dispenser option. The door bin needs to be 5 inch height on the back, 3 inches in height in the front. It is slightly over 12 inches in length if measured from the back (11 inches from the front).
For model number LFHG2251TF0
Hello Craig,
Thank you for your question. The door bin that fits your measurements for your model is under part PS3497801. We hope this helps.
Hello Connie, thank you for writing. Here is a link of what parts to check and how to test them: https://www.partselect.com/Repair/Refrigerator/Refrigerator-Freezer-Too-Warm/ . Good luck with your return.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
In my specific appliance the water valve is located in the bottom right hand corner looking at it from the back. To get to it I remove the thin layer of cardboard the covers the back of the fridge. I then proceeded to disconnect the 1/4" copper tubing which is the water feed coming out of the wall. Then I removed the screws that hold the valve assembly in place. I took the water valve out and removed the electrical connections as well as the plastic tubing which feed the water dispenser and the ice maker. To install the new water valve it was just a matter of reversing steps.
Even though my wife said that our icemaker broke, there was actually nothing wrong with it. It was the valve that let water flow in during the 'harvest' cycle. A real easy way to test the icemaker without voltage and current measurements, is to fill the tray by hand with a little cup of water; wait till the water freezes and see if the maker dumped the ice into the bin.
pulled fridge from wall, removed card board cover, unplug the fridge. turn the water off to the fridge. remove the water source from fridge first then remove 2 screws that hold the valve. then the wire plugs. hoses.. they were color coded.