This is a package of 2 filters. The charcoal filter is used in microwaves to remove food odors from the air. If your filter is damaged or strong odors are coming from your microwave, it is best to rep...
$33.03
In Stock
Order within the next 10 hrs and your part ships today!
Order within the next 10 hrs and your part ships today!
Questions And Answers for KHMS155LWH0
Ask our experts a question about this model and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Debra
April 27, 2023
Hi I need to replace the rack inside of my microwave. Can I use any microwave rack. I have two hooks on both sides of microwave.
For model number KHMS155LWH0
Hello Debra, thank you for your inquiry. The meal rack support, part number PS2580899, is compatible with your model. It is advised to use model-specific parts. We hope this is what you were looking for!
Slide grease filter about 1/2 inch to right (or left) using the d-ring attached to one side and then pull down and out. Push charcoal filter frame slightly to rear and pry down from front. Install new charcoal and grease filters by reversing process. No tools - 5-minutes max!!
First -- and this was the key to success -- I watched a couple of Youtube videos on "Replacing a microwave door handle". As one video suggested, I placed a large towel underneath where I was working (over the stovetop) to catch any falling parts but this proved unnecessary. Once I removed the two screws from the end of the door, the inside of the door pried off easily with a screwdriver. It did want to drop quickly though, so be ready to hang onto it. The handle was attached with two screws (which I reused, no problem). It took a few minutes to re-insert the inside of the door into the frame, but once that's done, you just re-install the two end screws and you're finished.