This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This broil element is found on the roof of the oven. The broil element is at the top of the oven and supplies the heat to broiling. 14" x 15" with 1-3/8" inserts.
This part works with the following...
This oven rack is chrome in color and is approximately 24.76 inches wide by 15.78 inches deep. If your old oven rack is damaged, you should consider replacing it. Many of our customers have determined...
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch...
This surface element control switch is for ranges.
Surface element control switch turns the surface element on and off and controls how much heat the element produces.
Unplug the range or shut o...
This switch controls the stove top surface burner.
$243.49
In Stock
Questions And Answers for KESS907SSS06
Ask our experts a question about this model and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Robert
October 10, 2023
The left front range burner is no longer working on either the single or dual setting. The red LED indicator is also not lit. I had noticed for several months that when set to large/dual, the burner seemed to NOT stay as hot as it should and would be red, then shut off, then red, then shut off. The red LED light also flickered. Is there a way to isolate whether it's the control switch (P517747407) or the dual radiant element (P517751688)? I hate to buy both parts at over $400 if only one is needed.
For model number KESS907SSS06
Hello Robert, thank you for your inquiry. According to our research, you may need to check the dual surface element switch, part number PS11747407, to fix this issue. Surface element control switch turns the surface element on and off and controls how much heat the element produces. We hope this information is useful!
My front right burner is not working,What di I need to fix.?
Thanks
For model number KESS907SSS06
Hello James, thank you for your inquiry. According to our research, the issue is most probably with the right front surface element infinite switch, part number PS11747406. It turns the surface element on and off and controls how much heat the element produces. You may need to replace it to solve the problem. Glad to be of help!
Something Kitchen Aid wont tell you but running a self clean on this model stove blows the fuse located on the back of the stove.
First I slid the stove out and removed the back of the stove held in place by 8 Phillips screws. The thermostat fuse is located near the top middle on the back of the stove. Remove the 2 screws holding it in place. Disconnect the wires, plug in the new part. Put it all back together. Job done in less than 30 minutes.
This repair would have cost $164 through A&E factory service.
My wife used the self cleaning function for the first time after 1.5 years of owning, of course out of warranty. A quick google search identified the problem. Called Kitchenaid, they said of course it can't be that simple, they had never heard of this problem, need to schedule a service call. Googled and found this site, Ordered the part, came in, only took a screwdriver and about 20 minutes, just like all the other posts.
shame on Kitchenaid for not owning up to the problem. I even e-mailed them all the links, they did not acknowledge them.