This Refrigerator Air Filter is a white 1.8x3.2" plastic filter which neutralizes odor and bacteria in the air. It should be replaced every six months at a minimum. Refer to your user manual and model...
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
Ask our experts a question about this model and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Stephen
March 16, 2023
the cover piece thats fit under the freezer door and sets almost on the floor but finished the way the refrigerator looks
For model number KBFN502ESS01
Hi Stephen, thank you for contacting us. The part you mentioned is the toe grill, part number PS11749873. It is black colored and fits with the stainless steel frame. We hope this is what you were looking for!
I’m experiencing problems with my LED lights I’ve changed a number of them but not all them. They were working fine for a while. Then they stopped now they blink a lot and several are dim. Do I need to replace the led power board? Thank you.
For model number KBFN502ESS01
Hi Steven, thank you for getting in touch. Before replacing the power board, we would suggest replacing the LED module kit, part number PS17216452. We hope this solves your problem!
First I shut the water off to the refrigerator.then i pushed the big button in the middle of the grille below the refrigerator door. pulled out the old filter, took the front cap off the old filter put it on the new filter. took the two red caps off the new filter. pushed the filter in till it locked in place. all done! Turned the back on.
It's simple enough in theory: read the side of the box and follow the instructions. BUT you need to really push the knob in pretty hard (I am a girl, and my hand strength isn't that good). If you don't, when you turn the knob, the filter won't come out, then it's tougher. So: make sure the knob pops before you turn!