This grease filter is sixteen and a half inches long and nine inches wide. It is made of metal and is intended for use with downdraft ranges and cooktops.
Use this scraper for your ceramic/glass cooktop. It has a retractable blade and is an all-purpose tool for cooktops, mirrors, windows and tile. Use it to also remove paint, paper, dirt, stickers and more.
This exhaust vent blower wheel is almost seven inches in diameter, and just under four inches deep. It is made entirely of metal and is used with a range's venting system.
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Hop
January 29, 2020
My cook top that can not control the heat. The elements keep on and off even i keep in a high heat. How to repair them?Thank you
For model number JED8430BDB18
Hi Hop, thank you for your question. There are a couple of parts that could cause this issue specifically. You will need a multi meter to be able to test the parts. The first part you will want to check is your radiant element. It should be reading between 0 - 120 ohms to be working correctly. The other part to check would be your infinite (or surface burner) switch. When you remove that part from the appliance, connect each probe from your multi meter to the prongs and then turn the switch to an on position. If you get no continuity then the switch is the issue. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Rene
August 14, 2021
I ordered a switch a while back and the part # is 12002125. Code 160606 will this fit on my jenn aire thanks. René
For model number JED8430BDB18
Hello Rene, Thank you for your inquiry. We do not show part# 12002125 as compatible to the model number you provided. We have researched your model and show the correct part number as PS11744225. Good luck with your repair.
1. Removed potand pans from under stovetop. 2. Disconnected exaust duct. 3. Raised the stove and placed wooden blocks under. 4. Unscrewed old top,and removed. 5. Placed new stovetop on stove, screwed into place. 6. Fresh caulk around opening. 7. Lowered stove into place. 8. Reconnedted duct work.
Lift off blower vent cover. Lift out old filter. Clean walls and bottom of down draft using degrease soap and warm water. Dry. Discovered my grease filter will not install diagonally as shown in unit manual. Decided to drop into downdraft and put in front of fan suction. Found this left a gap at the top of fan suction that was not covered by the filter. Cut piece of wood 1 inch thick and width and length to drop down in the downdraft and lay on bottom. Set filter on top of wood in front of the fan suction. Verified that fan suction would pull filter tight against the opening by turning fan on and off. Put vent cover back over downdraft and told wife I was done.
I removed the center vent and inserted the filter...easy as pie...I went to your website and everything was there in an easy to follow way that even I could understand, my husband was totally impressed that I took care of it on my own....silly man.....it was so easy and delivery was extremely quick....so simple....thank you for making it so!!!!