Models > GTUP270GM4WW

GTUP270GM4WW General Electric Washer Dryer Combo - Overview

Sections of the GTUP270GM4WW

[Viewing 12 of 12]

Manuals & Care Guides for GTUP270GM4WW

Click to download
Keep searches simple, eg. "belt" or "pump".
Interlock Switch – Part Number: WD21X10261
Interlock Switch
★★★★★
★★★★★
(13)
PartSelect #: PS1481922
Manufacturer #: WD21X10261
This part is a simple on/off mechanism that prohibits the appliance from operating when the door is open.
$33.12
  Special Order
Door Latch – Part Number: WE1M1011
Door Latch
★★★★★
★★★★★
(2)
PartSelect #: PS3502777
Manufacturer #: WE1M1011
This part helps to keep the door closed while the machine is running.
$14.51
  Special Order
Door Strike – Part Number: WE1X1192
Door Strike
★★★★★
★★★★★
(2)
PartSelect #: PS266893
Manufacturer #: WE1X1192
TThe door strike for your dryer is mounted on the dryer frame that the door shuts onto. It fits into the door catch on the door and keeps the door closed. If the door strike is damaged or missing, the...
$10.90
  Special Order
High Limit Thermostat - L315-65 – Part Number: WE4M137
High Limit Thermostat - L315-65
★★★★★
★★★★★
(6)
PartSelect #: PS267900
Manufacturer #: WE4M137
This part is the replacement high-limit thermostat or safety thermostat for your dryer. The high-limit thermostat is found on the upper right-hand side of the heater housing, and it cuts off power to ...
$33.12
  Special Order
Push-to-Start Switch – Part Number: WE4M416
Push-to-Start Switch
★★★★★
★★★★★
(2)
PartSelect #: PS3487190
Manufacturer #: WE4M416
This switch is used to activate the dryer.
$23.21
  Special Order
Cycling Thermostat - 4 Wire – Part Number: WE4M181
Cycling Thermostat - 4 Wire
★★★★★
★★★★★
(3)
PartSelect #: PS267926
Manufacturer #: WE4M181
This thermostat helps to regulate the dryer's internal temperature. L210-30F
$58.60
  Special Order
Door Switch – Part Number: WE4M415
Door Switch
★★★★★
★★★★★
(1)
PartSelect #: PS2344321
Manufacturer #: WE4M415
A door switch is a simple on/off mechanism that prohibits the dryer from operating when the door is open.
$39.78
  Special Order
Lid Lock & Switch Assembly – Part Number: WH44X10288
Lid Lock & Switch Assembly
★★★★★
★★★★★
(2)
PartSelect #: PS3496878
Manufacturer #: WH44X10288
The door latch lid lock is to lock the door on your washer when the appliance is in use. Your washer will not start if your door is not locked. If your latch is broken, you may not be able to start a ...
$134.05
  Special Order
Hose Clamp Kit – Part Number: WH1X2036
Hose Clamp Kit
PartSelect #: PS270806
Manufacturer #: WH1X2036
This hose clamp kit contains two clamps. The smaller of the two is an inch in diameter while the larger of the two is two inches in diameter.
$11.80
  Special Order
SPRING SHIFTER – Part Number: WH01X10606
SPRING SHIFTER
PartSelect #: PS3505476
Manufacturer #: WH01X10606
$10.29
  Special Order
Hub Nut – Part Number: WH01X10618
Hub Nut
★★★★★
★★★★★
(1)
PartSelect #: PS3501416
Manufacturer #: WH01X10618
This hub nut is a genuine OEM replacement part for your stackable washing machine. Removing the hub nut may require a spanner wrench, as per the manufacturer specifications. Replacing this part requir...
$22.57
  Special Order
SOCKET ROD SUPPORT – Part Number: WH01X10620
SOCKET ROD SUPPORT
PartSelect #: PS3501418
Manufacturer #: WH01X10620
$9.61
  Special Order

Questions And Answers for GTUP270GM4WW

Ask our experts a question about this model and we'll get back to you as soon as possible!

2 questions answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Elsbeth
July 21, 2021
There is no heat going to the dryer. I'd like to check the fuses but do not know where they Are located.
For model number GTUP270GM4WW
PartSelect logo
Hi Elsbeth, Thank you for your question. The fuse is in a holder next to the electronic control board. If your dryer is not heating the fuse is one part that you will need to check. You should also check the high limit thermostat, the cycling thermostats and the timer. We hope this helps! Good luck with the repair!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Thomas
January 24, 2023
Does not start. Push start button motor just hums.
For model number GTUP270GM4WW
PartSelect logo
Hello Thomas, thank you for contacting us. Please check the following parts with a multimeter to diagnose the fault: the interlock switch, part number PS1481922, the push-to-start switch, part number PS3487190, the door switch, part number PS2344321, and the drive motor, part number PS11699355. These are the most probable culprits. Customer service is available 7 days a week if you require assistance placing an order. Thanks again for reaching out!

Was this helpful?
Thank you for voting!
Related Parts:
  • 1

Common Symptoms of the GTUP270GM4WW

[Viewing 9 of 9]
Door won’t close
Fixed by
these parts
Fixing Fixing Fixing
Show All
Will Not Start
Fixed by
these parts
Fixing Fixing Fixing
Show All
Leaking
Fixed by
these parts
Fixing Fixing Fixing
Show All
Too hot
Fixed by
these parts
Fixing Fixing
Show All
Won’t Start
Fixed by
these parts
Fixing Fixing Fixing
Show All
Door latch failure
Fixed by
these parts
Fixing
Show All
Touchpad does not respond
Fixed by
these parts
Fixing
Show All
Lid or door won’t close
Fixed by
these parts
Fixing
Show All
Will not drain
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Dryer would get very hot and then turn off
It was actually my father, he doesn't use the internet. He thought that because the dyer got real hot and then shut off he thought the thermostat wasn't working and the high temp shutoff was okay. He went through the manual and found the part and took it out. He called the service number but they wanted $50 dollars plus shipping. I saw it was a Thermo-disc part so I tried the manufacture's website but I couldn't match the numbers on the back to their part numbers. I tried several other sites and your site was the cheapest. It was real easy to use the web site and diagrams to find the right schematic and part. I ordered it online and it was delivered in 2 days with the regular shipping. When he first put it in the dyer didn't turn on. He found no power coming out of the timer so he cleaned the contacts and it worked. Thanks for making the ordering so easy.
Parts Used:
Cycling Thermostat - 4 Wire
  • David from Auburn, MA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Screw drivers
273 of 562 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer would not start
The end repair was very simple and took minimal effort. The time and difficulty was all in the testing. I disassembled the dryer and removed the drum and then hard wired each thermo-fuse to determine where the fault was. After test all of those I was stumped. When I opened the door the light would not come on so I assumed it was a power fault closer to the source. However after all of my testing I couldn't find anything wrong. I then removed the light bulb and realized it was burned out which led me to the door switch being the fault. I removed the switch and soldered the three wire together and the dryer started right up! All I had to do was order a new $15 part, unsolder the wires and plug them in. Would have been so much simpler if that light bulb hadn't of been burned out causing me to over think my diagnosis. This was my first major appliance repair and I did it with only the help of the parts diagram provided on the website.
Parts Used:
Door Switch
  • Joshua from Dallas, TX
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Pliers, Screw drivers, Socket set
88 of 131 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
dryer door wont stay shut
pulled out door striker anddoor latch out with pliers and just pushed in new parts. works like new in under a min.
Parts Used:
Door Latch Door Strike
  • robert from mount joy, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
80 of 119 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!