This authentic, white Drum Bearing Slide, also known as the bearing drum slide, glide, or pad, is a plastic, easy-to-install part for your dryer. It replaces the dryer's front drum slide to allow for ...
This original equipment manufacturer Drum Bearing Slide is a plastic, green, easy-to-install part for your dryer. It replaces the dryer's front drum slide to allow for easier movement. You'll know if...
This drum bearing helps your dryer operate as quietly as possible.The drum slides should also be replaced when replacing the drum bearing. The slides are NOT included with this part this is the bearin...
This Drive Belt is 89.5" long and comes in black, featuring four ribs on the inside for a better grip. This is a long belt that wraps all the way around the dryer drum, around a tension pulley, and th...
TThe door strike for your dryer is mounted on the dryer frame that the door shuts onto. It fits into the door catch on the door and keeps the door closed. If the door strike is damaged or missing, the...
This part is the replacement high-limit thermostat or safety thermostat for your dryer. The high-limit thermostat is found on the upper right-hand side of the heater housing, and it cuts off power to ...
The door latch lid lock is to lock the door on your washer when the appliance is in use. Your washer will not start if your door is not locked. If your latch is broken, you may not be able to start a ...
$134.02
Special Order
Questions And Answers for GTUN275EM1WW
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Lawrence
January 6, 2024
In the rinse cycle, should the drum fill with water to the selected water level and agitate for a period of time? In other words, is the rinse cycle similar to the wash cycle, or does the drum not fill in rinse.
For model number GTUN275EM1WW
Hello Lawrence, thank you for the question. When a washing machine enters the rinse cycle, it fills the drum back up with water, agitates the load once again, and then drains it. Unlike the wash cycle, however, there is no detergent added during this step. The rinse cycle merely refills the drum with fresh water, spins the clothes around, and drains it. The main purpose of the rinse cycle is to wash away excess detergent, soap, and suds. Although water is drained during the wash cycle, it is not uncommon for detergent residue to get left behind; thus leaving the clothes sticky. This is easily prevented with the addition of a rinse cycle. We hope that helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
John
February 10, 2020
Will the washer fill and try to cycle then not agitate?
For model number GTUN275EM1WW
Hi John, thank you for your question. Usually when you are experiencing a problem like this the part to check would be your lid lock switch. If that part is malfunctioning it will not allow your appliance motor to spin as it believes that the door is open. Good luck with your repair.
Was this helpful?
Thank you for voting!
Ken
February 13, 2024
Does the washer & dryer separate?
For model number GTUN275EM1WW
Hello Ken, thank you for your question. This is a single appliance that contains a washer and dryer fused together as one. hank you and have a great day.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Removed the front Dryer panel. Left drum in place and lifted it up slightly to get access to motor drive. Slipped belt in place and put panel back on. This was a first attempt ever at fixing an appliance and it was no big deal.
It was actually my father, he doesn't use the internet. He thought that because the dyer got real hot and then shut off he thought the thermostat wasn't working and the high temp shutoff was okay. He went through the manual and found the part and took it out. He called the service number but they wanted $50 dollars plus shipping. I saw it was a Thermo-disc part so I tried the manufacture's website but I couldn't match the numbers on the back to their part numbers. I tried several other sites and your site was the cheapest. It was real easy to use the web site and diagrams to find the right schematic and part. I ordered it online and it was delivered in 2 days with the regular shipping. When he first put it in the dyer didn't turn on. He found no power coming out of the timer so he cleaned the contacts and it worked. Thanks for making the ordering so easy.
First I really had to hunt for the proper way to get my dryer drum accessible for the repair. With my model it was as simple as removing two screws to take off the top panel (located by opening the dryer door), and then removing two other screws inside the front panel at the top. The front will then be able to swing to the left side (the door switch wires are on this side for this model). Simply remove the drum bearing by gently pulling it off. My slides were in such poor shape for less than 4 years old!! One of them had completely disintegrated! These slides have a small whole on one end which attaches to a small nub at the edge of a slot while the other side just slid into a slot at the other end. No need to even take out the drum!! The hardest part of the job was to get into the dryer!