This water filter purifies water going to the water dispenser and sometimes the icemaker as well. This part should be replaced if it is causing reduced water flow or just replaced periodically per the...
The crisper drawer in your refrigerator is used for storing various items. If you notice that your current crisper drawer is damaged, you may need to replace it. You may notice that your refrigerator ...
$131.93
In Stock
Order within the next 5 hrs and your part ships today!
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
$10.21
In Stock
Order within the next 5 hrs and your part ships today!
This light switch may also be known as a refrigerator door switch or a light switch kit, and is compatible with your refrigerator. The function of the refrigerator door switch is to turn on the light ...
$35.26
In Stock
Order within the next 5 hrs and your part ships today!
This is a replacement pivot block for your refrigerator. It is made of white plastic and is approximately 4 inches long and 1 inch wide. The pivot block catches and holds the door mullion cover when y...
$14.16
In Stock
Order within the next 5 hrs and your part ships today!
This kickplate grille is attached to the bottom of the refrigerator.
$102.11
In Stock
Order within the next 5 hrs and your part ships today!
Questions And Answers for GI0FSAXVY011
Ask our experts a question about this model and we'll get back to you as soon as possible!
9 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Timothy
January 6, 2024
Door alarm light blinks, interior lights not on, ice maker doesn't work. When I unplug the refrigerator for 45 minutes to reset, lights work, ice maker makes sounds as if it is working, door alarm light is off. After a few minutes the door alarm goes off, and it won't shut off by pressing the button. If I hold the button, different settings appear on the panel, and I seem to be able to get it back to where it started...no lights, no ice, alarm light blinking, but at least refrigerator working. It has been like this since I've known the owner (7 years).
For model number GI0FSAXVY011
Hi Timothy, thank you for the question. Based on the description you have provided, the issue is most probably with the dispenser control board, part number PS10060178. It controls the water and ice dispenser operations in the refrigerator door. You may need to replace it to fix the issue. We hope this sorts out your problem!
Hello Sharon, thank you for reaching out. According to our research on model number GI0FSAXVY011, the problem appears to be with the Water Filter, part number PS11722130. If that does not help then the issue is likely to be with the Icemaker Motor Kit, part number PS733947. Customer service is always available to help you place an order if you are having trouble doing so. Good luck with your repair!
The cover that holds the water filter hangs down because the plastic catch is broken. Can I fix this?
For model number GI0FSAXVY011
Hello Kathleen, thank you for your question. The part that has the catch on it is the Water Filter Cover PS11743682. It is very easy to install. We have a video for installation if you have any question. We hope this information will help you.
Hello Jim, thank you for contacting us. Based on our research, we are providing you with instructions that will help you replace the door hinges.
1- First, remove the door bins.
2- On the top of the fridge, remove the screw and plastic cover over the hinge.
3- Disconnect the water line and electrical connection.
4- Remove the screw holding the ground wire.
5- Apply a piece of tape to secure the door in place.
6- Remove the two screws seated on the top hinge.
7- Lift up the door hinge and separate the retainer from the hinge.
8- Open the door and lift the door off from the bottom hinge.
9- Remove the screws holding the bottom hinge.
We hope this helps!
Was this helpful?
Thank you for voting!
RANDY
April 25, 2023
WHY DOES THIS UNIT NOT FREEZE WATER. CONTROL @-6 DEGREES F. FRIDGE CONTROL SET AT 33 DEGREES HOLDS AT 43 DEGTREES F.
For model number GI0FSAXVY011
Hello Randy, thank you for the question. We have determined that replacing the cycling thermostat, part number PS11743313, may fix this problem. Good luck with this repair!
Pressed in the end of the filter cover, lowered it down part way. Twisted the old filter 1/4 turn and removed it. Set in the sink to drain. Inserted new filter and twisted it to lock. closed cover. Done. Total time @ 1 Minute.
I removed the drop-down outer housing by gently prying the sides of the two pivot pins at the rear. This gave me move 'room' to grip and slightly rotate then pull the old filter forward and away from the tight suction connection. I was concerned that I would be too forceful for the plastic assemblies and would break something; deliberate motions and a steady thought process on the problem helped disengage the darned old filter!
Removed door and crisper pans. Removed nuts on left end cap - think there were 3. Removed nuts on right end cap and one or two on back air regulator attached to right end cap. Replaced left end cap with new one using reserved nuts. Carefully removed back air regulator from right end cap. Attached back air regulator to new right end cap. Replaced right end cap and back air regulator and attached with nuts. Carefully inserted pantry door into pin on one side and slightly bent both right and left pins to insert door fully into end caps. Replaced crisper pans. That's it.