This water inlet valve should be located behind the lower kickplate panel in either the right or left corner. The attaching solenoid on the valve open and close according to the desired amount of water needed.
The circulation pump adapter, or pump adapter assembly connects the circulation pump to the tub of your dishwasher. If your dishwasher is leaking around this adapter, check the connection to ensure ev...
The hinge link on your dishwasher connects the spring to the dishwasher door hinge. If the hinge link becomes cracked or damaged, you may not be able to shut or lock your dishwasher door properly. In ...
This is the replacement fine filter hub nut for your dishwasher. It is made of white plastic and is approximately 3 inches in diameter. The fine filter hub nut is also known as the lower spray arm hub...
This kit includes the drain hose with black rubber end fittings and a clamp.
$69.30
Special Order
Questions And Answers for GHDT168V55SS
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
George
March 1, 2024
Does this model have a replaceable timer? I have noticed that my wash cycles are running longer than they should and I am thinking that the timer mechanism could be failing.
For model number GHDT168V55SS
Hi George, thank you for the question. Based on our research, your model comes with a control tactile assembly kit, part number PS4704220. We would suggest replacing it to fix the issue. We hope this solves your problem!
How do I remove the top rack sliding rails from the cabinet sides, for cleaning?
For model number GHDT168V55SS
Hello James, Thank you for the question. Here is a Link to a How to Video that will help. Good luck with the repair!
https://www.youtube.com/watch?v=h4Wgq6MPg5w&feature=emb_title
Was this helpful?
Thank you for voting!
Scott
February 4, 2023
Ran dishwasher but dishes didn't get washed but dryer work. Would new belts be the answer to why the dish washer didn't wash?
For model number GHDT168V55SS
Hello Scott, Thank you for writing. The Dishwasher does not come equipped with belts sorry. We suggest checking the Fine Filter to make sure it is clear and not blocked. You can also check the Detergent Dispenser with Rinse Cap to see if it is dispensing the detergent. Make sure the Wash Arms are spinning and the holes are clear and allowing the water to spray the dishes. We hope this information helps!
All I had to do is take out the rack, pop off the old wheels, place the new stud rollers on, then pop on the new wheels. So easy and now my dishes don't get chipped when I pull the rack out and push it back in. I wish I didn't wait so long to order new parts.
Pull old rack out, slip new one in! One thing i did was order wheels and studs as i was unaware they lower rack came fully equiped with all wheels,studs, and flip up dish dividers. So if your replacing the rack no need to order the wheels! The diagram made it look as if you only et the wire rack and not all the added pieces.