This small, Phillips-head screw works with your refrigerator/freezer. It screws in to the freezer door and connects to the door handle. This part is made of stainless steel and is sold individually. T...
Sold individually.
This is a genuine part. The handle mounting shoulder screw (no.10 ab) is made for use with many refrigerators. The metal screw helps to fasten the handle assembly to the outer do...
The PurePour water filter is compatible with Frigidaire, Frigidaire Gallery and Professional side-by-side and French Door refrigerators with PurePour ice and water filtration. This genuine Frigidaire ...
This freezer basket hanger, also known as a drawer slide rail, is a genuine OEM replacement part for the freezer compartment of your refridgerator. This hanger is for the left side. Pull out the front...
Ask our experts a question about this model and we'll get back to you as soon as possible!
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Carol
January 24, 2023
What does it mean when power outage appears on freezer door?
For model number FRSS2623AS0
Hello Carol, Thank you for your inquiry. This message usually appears after a power interruption to the refrigerator where the internal temperature of the refrigerator rises above the same temperature zone. . In most cases, pressing alarm reset or any button will clear the alarm. If it does not, then you may have an issue with the power supply board. Try unplugging the appliance for 5 minutes to see if it resets the board and check the internal temperature to see if the refrigerator is cooling. Good luck with your repair.
Need to replace the “pure air ultra II filter”. How do I get one and how do I reset the refrig for replacing that filter?
For model number FRSS2623AS0
Hello James, thank you for reaching out. The air filter for your model is part number PS12586284. After you change the filter, hold the Air Filter for 3 seconds to reset.
Frigidaire came with 3 shelves. I need another one
For model number FRSS2623AS0
Hello Sigfredo, thank you for writing. The top shelf in the fridge is part PartSelect Number PS16227278. We hope this helps.
Was this helpful?
Thank you for voting!
Larry
March 3, 2023
steps for procedure to replace water filter
For model number FRSS2623AS0
Hello Larry, thank you for your inquiry. To replace the water filter, turn off the ice maker first and remove the filter by pushing on the end or face of the filter. Then, slide the old water filter cartridge straight out of the housing and discard it. Next, unpackage the new filter cartridge and use the alignment guide to slide it gently into the filter housing until it stops against the snap-in connector at the back of the housing. Push firmly until the cartridge snaps into place, and you should hear a click as the cartridge engages the snap-in connector. We hope this helps, good luck with this repair!
Was this helpful?
Thank you for voting!
Jeff
March 9, 2023
I am looking for a replacement vegetable/meat drawer in the refrigerator part. This is a side by side refrigerator.
For model number FRSS2623AS0
Hello Jeff, thank you for contacting us. Your model comes with two crisper drawers. The upper crisper drawer, part number PS16227283, and the lower crisper drawer, part number PS16227284. We hope this is what you were looking for!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
I checked the dampener, it worked. The compressor and fan worked. I knew because my freezer was still hovering around 10 degrees. Coils were clean. Thermistor was the only thing it could be. Took all my shelves out. Removed four screws. Took the back panel off. The thermistor sits tucked in on the side. I piped it out, in clipped it. Used my multimeter to test the numbers. Numbers were off just a bit. Ordered the part. Crossed my fingers.,took less then 5 minutes to put the part in. Plugged in the fridge. It was sitting at 33 degrees in about an hour and a half. I can’t believe I fixed it. I knew NOTHING about refrigerators. For how big my fridge is, it would have cost 3,000 and up to get a new one with the same cu ft size. Instead, it cost me $44. That includes shipping. Thank you Parts Select!! Made it so easy to pick the correct part for my model fridge!
The part i recieved, from parts select was a larger in circumfrence (<1/4) than the original. However i was not aware of this until after i treid to repair it.
I removed the broken fan from the condenser. This was very sipmle.
When i pluged the refridgerator back in to the outlet the fan tried to start up but soon began to make aloud noise, due to there not being enough clerance.