This small, Phillips-head screw works with your refrigerator/freezer. It screws in to the freezer door and connects to the door handle. This part is made of stainless steel and is sold individually. T...
$33.09
In Stock
Order within the next 3 hrs and your part ships today!
Sold individually.
This is a genuine part. The handle mounting shoulder screw (no.10 ab) is made for use with many refrigerators. The metal screw helps to fasten the handle assembly to the outer do...
$27.52
In Stock
Order within the next 3 hrs and your part ships today!
The PurePour water filter is compatible with Frigidaire, Frigidaire Gallery and Professional side-by-side and French Door refrigerators with PurePour ice and water filtration. This genuine Frigidaire ...
$106.67
In Stock
Order within the next 3 hrs and your part ships today!
This freezer basket hanger, also known as a drawer slide rail, is a genuine OEM replacement part for the freezer compartment of your refridgerator. This hanger is for the left side. Pull out the front...
$74.32
In Stock
Order within the next 3 hrs and your part ships today!
Order within the next 3 hrs and your part ships today!
Questions And Answers for FRSS2323AB0
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ellen
March 22, 2023
Want to arrange shelves in the fridge but there isn’t instructions on how to remove them.
For model number FRSS2323AB0
Hello Ellen, thank you for reaching out. Shelves are easily adjusted to suit individual needs. Before adjusting the shelves, remove all food. Shelves are supported by side rails. To adjust, lift up on the back of the shelf and pull forward. Replace the shelf by sliding it on top of rails formed on the side walls of the cabinet until the rear plastic hooks of the shelf lock into the rear of the cabinet liner. Glad to be of assistance!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Jim
January 10, 2024
High Temp alarm, what causes this?
For model number FRSS2323AB0
Hi Jim, thank you for getting in touch. Indicates the freezer and/or refrigerator section of your appliance have exceeded the temperature threshold. This is usually caused by inadvertently not closing the door all the way or leaving the door open for an extended period. The alarm can be muted but it will stay active (or illuminated) until the temperature resumes normal operation. So that you can fix the cooling problem and prevent food spoilage. Sometimes, lack of maintenance can cause cooling problems and trigger the high-temperature alarm. Perform routine maintenance on the refrigerator, such as cleaning the door or lid seal to keep warm air from entering the refrigerator and triggering the alarm. Clean dirty condenser coils because dirty coils will not cool down refrigerant before it enters the evaporator, resulting in poor cooling performance. Check the condenser and evaporator fans. If this does not help, we would recommend replacing the user interface control assembly, part number PS1765215. Glad to be of help!
I checked the dampener, it worked. The compressor and fan worked. I knew because my freezer was still hovering around 10 degrees. Coils were clean. Thermistor was the only thing it could be. Took all my shelves out. Removed four screws. Took the back panel off. The thermistor sits tucked in on the side. I piped it out, in clipped it. Used my multimeter to test the numbers. Numbers were off just a bit. Ordered the part. Crossed my fingers.,took less then 5 minutes to put the part in. Plugged in the fridge. It was sitting at 33 degrees in about an hour and a half. I can’t believe I fixed it. I knew NOTHING about refrigerators. For how big my fridge is, it would have cost 3,000 and up to get a new one with the same cu ft size. Instead, it cost me $44. That includes shipping. Thank you Parts Select!! Made it so easy to pick the correct part for my model fridge!
Took drawers out by removing 2 screws on top of rail near front, then popped black plastic cover off in lower right inside cabinet...sensor just un plugged and new one plugged in easily...did not fix problem though...display set at 34 but bottom drawer reads about 40 at best and upper drawer reads around 55...dont think the 3 little fans inside on back wall have been running
