Models > FRS3HR5HW1

FRS3HR5HW1 Frigidaire Refrigerator - Overview

Find Parts and Repair Help for FRS3HR5HW1.

If you know the repair part that will fix your refrigerator you can search through the list of all parts for FRS3HR5HW1 or you can narrow down the list by entering in the part description or name. If you know where the part is located on the FRS3HR5HW1 you can search for it by selecting one of the section diagrams below. We've also put together a list of symptoms common to your refrigerator so you can find the part you need based on the problem you are having. We've included all of our repair videos that apply to FRS3HR5HW1 to help you easily complete your repair. You can search through the installation instructions, written by our helpful PartSelect.ca customers, to find more information on your repair.

CAD$37.97

Water Filter

Sold individually.

CAD$4.42

Crisper Support

This support can be used for both front and rear and is sold individually.

CAD$46.10

Door Bin

Also known as the 2-liter door bin. Sold individually.

CAD$16.68

Meat Drawer Rail - Right Side

As you look into the fridge, this drawer support track is located on the right hand side.

CAD$3.27

Crisper Cover Support - Front and Rear

This part can be used for either the front or rear support. Sold individually and mounts to the inside cabinet wall.

CAD$75.03

Water Inlet Valve

The water inlet valve is a solenoid-operated switch that, when activated, releases water from the supply line to the water valve and into the compact ice maker mold.

CAD$4.84

Hinge Bearing

Sold individually. Also known as a short door closing cam.

CAD$16.68

Meat Drawer Rail - Left Side

This drawer rail supports the left hand side of the sliding drawer. The mounting screws are sold separately.

CAD$11.60

Door Closing Cam

Sold individually. This cam is located at the bottom of the fridge/freezer door.

CAD$32.44

Door Bin

This door bin holds items on the door of your refrigerator. They are sometimes called Cantilever Shelves as they are supported by the back of the shelf itself to the door of your refrigerator. Sold individually.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Water in Frig was tasting bad.

  • Customer: Patricia from Fulton MO
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 466 of 466 people found this instruction helpful
I turned the cap for the old filter and pulled it out . Then I put in the new one in and turned the cap to secure it in frig. read more

water from refigerator dispenser started tasting bad

  • Customer: Anthony from Springfield VA
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 338 of 339 people found this instruction helpful
I removed the top shelf in the fridge. I then unscrewed the cover to the water filter and pulled the filter cartridge down into the cover. Keep the cover upright as there may be some water in it. I carried it to the sink. I took the new cartridge and ran water through it from the sink, then set it in the cover and took it to the fridge. I pushed the car... read more

water leaking out of refrigerator

  • Customer: Jose from Alexandria VA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers, Wrench(Adjustable)
  • 174 of 210 people found this instruction helpful
In my specific appliance the water valve is located in the bottom right hand corner looking at it from the back. To get to it I remove the thin layer of cardboard the covers the back of the fridge. I then proceeded to disconnect the 1/4" copper tubing which is the water feed coming out of the wall. Then I removed the screws that hold the valve assembly in p... read more