The relay switch may also be known as the door micro switch and is a part for your microwave. The function of this part is to monitor the door latch and communicate whether the door latch is open or c...
$57.45
In Stock
Order within the next 6 hrs and your part ships today!
This roller guide sits underneath the glass turntable tray.
$129.31
Special Order
Questions And Answers for FPBM189KFC
Ask our experts a question about this model and we'll get back to you as soon as possible!
7 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Michelle Huether
July 12, 2022
Microwave stopped heating and smelled burnt when ran
For model number FPBM189KFC
Hi Michelle,
Thank you for your question. If your microwave has stopped heating and there is a burnt smell coming from it, you will need to check the diode, the door switches and the magnetron. We have included a link that you may reference on how to check these parts. Once you have determined the part you need, please feel free to call customer service. We are open 7 days a week and anyone will be happy to assist you. We look forward to hearing from you!
The handle screws on my Frigidaire professional series microwave are loose. How do I remove the handle to tighten the screws?
For model number FPBM189KFC
Hello Rand, Thank you for the question. To get to the screws for the handle, you will need to remove the inside Door panel to expose and access the Handle Screws. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
Laurie
March 16, 2023
microwave will not heat .... Frigidaire.
thank you.
For model number FPBM189KFC
Hello Laurie, thank you for your inquiry. Based on our understanding of the issue, we would suggest checking the following parts: door switch, part number PS8769124, high voltage diode, part number PS2339491, capacitor, part number PS2339492, and thermal fuse, part number PS466969. If this does not solve the issue, then you may need to check the magnetron, part number PS2343030. We have attached a relevant link to help you check these parts. We hope this helps, good luck with this repair!
Hi Robert,
Thank you for your question. The glass cooking tray measures approximately 14-1/4 inches in diameter. We hope this helps!
Was this helpful?
Thank you for voting!
Michelle
December 17, 2023
Originally would run with no heat...after replacing the diode and magnetron it now blows fuse after couple seconds..
Does this sound like capacitor or transformer?
For model number FPBM189KFC
Hello Michelle, thank you for reaching out. According to our research, you will need to check the high-voltage transformer, part number PS2343029, to fix the issue. We hope this helps!
I first removed the top plate above the microwave door (3 screws), then I removed the plate containing the buttons and clock. The microwave has 3 relay switches and they are in a little holder. The holder was too difficult to remove so I just removed the bottom switch and replaced. The microwave started right up.
was told buy a repair person to check the door micro switches as it was a common problem. removed the top plastic air grill to get access to the screw that holds in place the control cover. After unplugging the unit, i took out the (2) screws that held in the switches and removed them (3). One switch was a bit melted so i tested it with a 12 volt battery and it was bad. Ordered a new one from Part select and got it fast . Works great .
After unplugging the unit remove the control face buy removing the screws. All three door switchs are on a bracket on the left. Remove the two screws holding the bracket in place and pull out. Disconnect the wires from the three switches and test each switch indivually to determine the bad one. I used a multimeter set on ohms.Replace the bad switch with the new one and replace all the wires. Reassemble the unit and you are good to go.
