This part is the replacement wash arm bearing for your dishwasher. It is made of black plastic and is approximately 1 1/4 inches in diameter. The wash arm bearing allows the wash arm to rotate when th...
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Joe
September 1, 2022
Part number for drain hose for this model Frigidaire dishwasher?
For model number FGID2476SF7A
Hello Joe, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS9492560. We hope this helps, good luck with this repair!
Does not dry the dishes and is leaving some dirty. Don't think the heating element is working. Can't find any info on the location of the element.
For model number FGID2476SF7A
Hi David, thank you for reaching out. We have researched and found that the issue is with the float switch, part number PS10057465. You may need to replace the switch to fix the issue. We hope this solves your problem!
My dishwasher display sometimes is lit up after cycle is complete and is locked up. I will not allow me to even cancel or restart unless I unplug the dishwasher. Also sometimes it will start and then stop and the control goes blank and beeps. I have to restart several times to make it work. Both are intermittent issues. My best guess is door switch, am I on the right track? Works great other than that.
For model number FGID2476SF7A
Hi Eric, thank you for your inquiry. Based on the description, we have concluded that you may have a defective user control and display board, part number PS16544414. It displays the dishwasher settings and lets you select the cycle. We would suggest replacing it to fix the issue. We hope this sorts out your problem!