This crisper cover front support is used to keep the crisper shelf in place and may need replacing if the door will not open or close. This white, OEM part measures roughly 1 inch in diameter and can ...
This authentic rear crisper support is a white, plastic part which is rated as "easy" to install by our customers. This OEM part replaces the rear crisper cover support in your fridge and mounts to th...
This NSF-Certified OEM filter is white in color with a plastic housing and extruded carbon filter media. It measures 2.3-Inches deep, 9.1-Inches high and 2.3-Inches wide. It fits certain Frigidaire si...
This cover holds up the top crisper drawer, and has drawer glides molded in it. This upper crisper drawer cover is a manufacturer-approved replacement part for your refrigerator. It has drawer glides ...
This original equipment manufacturer Door Shelf is a white plastic part which holds items inside of your freezer or refrigerator door. It is roughly 10 inches long by 4 inches high by 5.5 inches wide....
This bin can be moved according to space needed. It holds items on the door of your refrigerator.
NOTE: This bin is only available in clear plastic now.
This part helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer. The run capacitor is attached to the compressor. This part is 120 volts a...
This 8-cube ice maker is used to create ice for your refrigerator. The ice maker receives water from the water inlet valve and will freeze until ice cubes are formed. Once the water has been frozen t...
This clear plastic crisper drawer is for side-by-side refrigerators. It is sold individually and sourced right from the original manufacturer. Please note that the new pan does not have the humidity c...
This part contains molded glide rails for the crisper pan. It does not come with the glass shelving. The glass is not included. Must be ordered separately.
$102.60
In Stock
Questions And Answers for FFSS2615TP0
Ask our experts a question about this model and we'll get back to you as soon as possible!
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Michael
December 22, 2019
Ice maker all the cubes frozen together
For model number FFSS2615TP0
Hi Michael, the temperature may be rising above the freezing point. I recommend checking the defrost thermostat and see if it may need replacement. Thank you for your question and good luck with your repair!
My Frigidaire you have the model number quit making ice it has the three-way valve I checked the valve I put a meter on it the one that feeds the ice maker I was told where zero is on the location of home for the ice tray then I was told to advance it no more than a quarter turn and I should feel something from the motor then wait for a little while and I should read my meter showing voltage to that valve so I'm not sure if I'm doing it actually right but my meter is not getting any reading I have advanced it in different areas he told me that the fingers going to start position cuz it is a top side mount the fingers would be to the left horizontally
For model number FFSS2615TP0
Hello Keith, Thank you for your inquiry. We show the compatible water inlet valve as part# PS7784018 and we have included a link to our video on testing a water inlet valve for continuity with a multimeter. We hope this helps.
I asked earlier about where the light bulb is located in the freezer and you answered. "The light bulb is located in the control box behind the board. " I know I am dim (pun intended) but where is the control box behind the board. Can you show a picture? Thank you very much. I'm trying.
For model number FFSS2615TP0
Hi Jan, thank you for reaching out. We have included a video that shows where the light socket is located, from there you can find where the bulb goes. We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Janice
May 6, 2023
Frigidaire Side By Side Freezer side. Where is the light bulb I don't see it!>>>
Thanks.
For model number FFSS2615TP0
Hello Janice, Thank you for your inquiry. The light bulb is located in the control box behind the board. We hope this helps.
In my specific appliance the water valve is located in the bottom right hand corner looking at it from the back. To get to it I remove the thin layer of cardboard the covers the back of the fridge. I then proceeded to disconnect the 1/4" copper tubing which is the water feed coming out of the wall. Then I removed the screws that hold the valve assembly in place. I took the water valve out and removed the electrical connections as well as the plastic tubing which feed the water dispenser and the ice maker. To install the new water valve it was just a matter of reversing steps.
Used pliers to remove the residual broken stud that was still attached to the wall of the refrigerator, and then just pushed the new part in place. The longest time was spent in removing the food and crisper drawers.