This hose clamp extends from half an inch to an inch in diameter. It is made entirely of metal and is intended for use with Maytag brand washing machines.
TURN OFF POWER TO RANGE AT FUSE BOX -- a)Open the oven door, b) Unscrew the left and right silver nuts (not the black screws)that are in the oven under the control panel, c)pull off the four control knobs on the control panel, d) gently tilt out the control panel, e) set the control panel in/on the protruding arms, f) pull off THE connectors at the back of the switches - remember which is top and bottom, g) use a screw drive to break off the plastic pieces that hold the switches in place, h) push out the old switches, i) push/snap in the new switches, j) reconnect wires, replace control panel and screw in the nuts.
I unscrewed the dishwasher brackets (2 of them) from under the counter, slid out the dishwasher. The springs (or broken springs) were visible. I removed them, popped the new ones in and viola!!! The door sprung up like it was new. Of course I slid the dishwasher back under the counter and put the screws back in. This took 15 minutes. I couldn't believe how easy it was. A repair man wanted to charge us $75 just for a service call (plus parts). I repaired for less than $25!!!!