Models > DGRSC364CB

DGRSC364CB Dynasty Cooktop - Overview

Sections of the DGRSC364CB

[Viewing 4 of 4]
Keep searches simple, eg. "belt" or "pump".
Oven Igniter – Part Number: 70001036
Oven Igniter
PartSelect #: PS2074089
Manufacturer #: 70001036
This part is used to light the oven for the bake or broil.
  No Longer Available
Bezel – Part Number: 70002470
Bezel
PartSelect #: PS2075121
Manufacturer #: 70002470
  No Longer Available
U-Shaped Oven Burner – Part Number: 12001805
U-Shaped Oven Burner
PartSelect #: PS2003342
Manufacturer #: 12001805
This is the burner only. The igniter is sold separately.
  No Longer Available
IGNITER- H – Part Number: 70001037
IGNITER- H
PartSelect #: PS2074090
Manufacturer #: 70001037
  No Longer Available
MODULE-SPK – Part Number: 70002163
MODULE-SPK
PartSelect #: PS2074886
Manufacturer #: 70002163
  No Longer Available
Stainless Steel Magic – Part Number: 20000008
Stainless Steel Magic
PartSelect #: PS56521
Manufacturer #: 20000008
Manufacturer's Number: 20000008 Helps restore luster and remove streaks from stainless steel appliances and cookware.
  No Longer Available
DISCONTINUED – Part Number: 70001761
DISCONTINUED
PartSelect #: PS2074574
Manufacturer #: 70001761
  No Longer Available
PANEL, LWR ACCESS (Black)(31) – Part Number: 70001225
PANEL, LWR ACCESS (Black)(31)
PartSelect #: PS117644
Manufacturer #: 70001225
  No Longer Available
PANEL, Lower ACCESS (WHT)(31) – Part Number: 70001228
PANEL, Lower ACCESS (WHT)(31)
PartSelect #: PS117647
Manufacturer #: 70001228
  No Longer Available
MANUAL, USE & CARE – Part Number: 70001548
MANUAL, USE & CARE
PartSelect #: PS117865
Manufacturer #: 70001548
  No Longer Available
SUB 70001899 – Part Number: 70001897
SUB 70001899
PartSelect #: PS118044
Manufacturer #: 70001897
  No Longer Available
BEZEL- OVE – Part Number: 70001079
BEZEL- OVE
PartSelect #: PS2074130
Manufacturer #: 70001079
  No Longer Available

Questions And Answers for DGRSC364CB

Be the first to ask our experts a question about this model!

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Oven ignition switch failed
This is actually for a Dynasty (Jade) Range (but that's not an option in the selection).

The repair is very easy - after you shut power off to the stove.

1. Remove all the stove control knobs from the front panel.
2. Remove the 2 phillips head screws on either side of the front control panel.
3. Pull the front panel out about 3 inches to expose the back of the switch.
4. Use a flat head screwdriver to push the retention clips down and loosen the switch from the panel.
5. Move the 5 wires connected to the switch using pliers, one by one to the new switch.
6. Push the new switch into the panel.
7. Replace the panel and controls.
8. Restore power and test.
Parts Used:
SWITCH- PO
  • Leon from San Francisco, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Screw drivers
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!