This an authentic OEM 40-Watt replacement light bulb, used in a number of household appliances. It is specially designed to withstand extreme temperatures, which is why these replacement bulbs are mos...
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch...
This spade style bake element with push on wire terminals is 16 inches wide. It has a terminal depth of three inches and a total element length of nineteen inches. This element comes with an instructi...
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Pastor
June 2, 2023
Could you check for my owen maytag: 1,- RANGE BAKE ELEMENT, part select # 11757472,
2.- Boil element #3000W , partselect # WP7406P203-60,
These parts are right for my owen. Thanks
For model number CWE4800ACE
Hi Pastor, thank you for reaching out. Based on our research, the part numbers you provided are compatible with your model. Let us know if you have further questions!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Rich
December 9, 2023
Oven does not heat the bake or broil heat element. I replaced the long oven sensor with no success. Would the next thing be the control board? The lower oven works fine.
For model number CWE4800ACE
Hello Rich, thank you for getting in touch. Based on our research, we would recommend checking the terminal block. If the issue is still not resolved, then you may need to replace the control board, part number PS11750220, to solve the problem. We hope this helps!
What does F3 mean? The oven will not heat nor does the broil part work/heat up either. Code is F3.
For model number CWE4800ACE
Hi Amarie, thank you for reaching out. Based on our research, the F3 error code indicates that there may be a problem with the oven control, or the associated wiring. We would suggest checking the wire harness and temperature sensor first. If these are fine, the issue could be with the oven control board, part number PS11750220. It monitors the temperature and controls the oven heat. You may need to replace it to fix the issue. We hope this solves your problem!
Removed the oven door by opening slightly, then pic door up to remove. Remove 2 screws holding oven sensor in place, gently pull on sensor to remove, had to remove about 8 inches to get at plastic connector. Unplug connector, had to use an adapter cable supplied with the PartSelect kit to install new sensor, push cable back into opening, reinstall 2 screws. The oven works fine! Note that due to thermal lag the temperature overshoots to 370 degrees and undershoots to 340 degrees, this appears to be normal oven operation. Putting door back in place was easy.
First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires. I threw away the old pieces.
Then I connected the two wires on the new element. I pushed the wires back in the insulation in the wall of the cabinet. Then I inserted the two screws and tightened them in.
SUPER EASY!!!!!
This $40 part saved me $1500 on a new double wall oven.
First I removed the two screws that hold the element in place. I then pulled the sensor out about 3 inches and disconnected the two wires. Next, I connected new sensor and screwed the new sensor back in place. One area for caution. Make sure that the electrical connection is pushed in past the insulation on the back side of the oven. Failure to do so will cause the plastic plug connector to melt from oven heat.