This part, in conjuntion with the diode and capacitor, can increase voltage from primary to very high in a short period of time and it converts that high voltage into waves of cooking energy.
Ask our experts a question about this model and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Amanda
November 11, 2021
Hello!I have this model and the heat side i not working. it’s getting cold so went to turn to heat auto, the heat popped on, stayed on for a bit then shut down. then i turned it t stop and back to heat auto, came back on and shut off again. now i cannot get the heat to work at all. fan hi and low work and low and hi auto cool work fine too. any ideas?
amanda
For model number AZ35H12D3BM1
Hello Amanda, thank you for writing. This sounds very much like an electronic control board issue. The part number is PS281911. However, For more specialized assistance or to speak with someone about this, we would suggest calling a qualified technician or the manufacturer of the unit directly. Good luck with your repair.
The Power Cord has a breaker on the plug. The breaker did not 'trip' during a power surge and fried the board in the plug. it melted. I ordered the replacement plug. Took apart the unit. Unplugged the power cord ends from the main unit. The ground wire (green) is screwed in. The other wires (white and black) are attached via push-on terminals. These are harder to get off and on since there are many and are in a tight space. May want to use some long needle nose pliers to assist. The new cable was attaced. There are two plastic clamps that help screw the cord to the unit. Only porblem was the new cord plugs in upside down so you will need to turn the outlet plug around. Turn off power, unscrew outlet and turn upside down. return power to outlet and plug in to complete.
I called the company that I purchased this product from and they gave me the part number that I needed and said to contact GE. I found you on the website and it was so very easy to order these replacement filters. Thank you for making this so easy.
