Models
>
ALZ8580ADB
ALZ8580ADB Amana - Overview
Models starting with ALZ8580ADB
Click on the best match to narrow your results.
Keep searches simple, eg. "belt" or "pump".
Top Burner Igniter
PartSelect #: PS2082000
Manufacturer #: 74004053
This top burner igniter comes with a mounting bracket.
$52.45
In Stock
Rubber Grommet
PartSelect #: PS2202491
Manufacturer #: Y8007P02060
Used as the bottom feet of a gas stovetop grate. Sold individually.
No Longer Available
Ignition Knob
PartSelect #: PS2081927
Manufacturer #: 74003944
This small black knob is used to turn on the igniter.
$27.04
In Stock
Insulation
PartSelect #: PS11750415
Manufacturer #: WPW10208653
Oven Wrap Insulation.
$77.44
In Stock
Burner Head Cap with Spark Electrode
PartSelect #: PS11741734
Manufacturer #: WP3412D025-09
This part distributes flame evenly to your cookware.
$152.00
In Stock
Appliance Screw
PartSelect #: PS11743002
Manufacturer #: WP59002061
Sold individually.
$10.15
In Stock
Regulator Kit with Fitting
PartSelect #: PS2002939
Manufacturer #: 12001285
This part will cut off the flow of gas to your appliance once it reaches a certain pressure.
No Longer Available
Oven Igniter
PartSelect #: PS2578840
Manufacturer #: 7432P097-60
Used with RV ranges.
No Longer Available
Common Symptoms of models starting with ALZ8580ADB
[Viewing 3 of 3]Will Not Start
Fixed by
these parts
these parts
Show All
Gas igniter glows, but will not light
Fixed by
these parts
these parts
Show All
Element will not heat
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
gas burner ignitor failure
Lift out sealed burner assembly rear of stove first while careully sliding to rear to disengage ignitor probes.Remove philips head screws from bottom sheet metal housing to expose bottom of burners Remove gas tube assembly screws and move tube away carefully.Unplug wires from ignitor.Remove screws for ignitor .Remove ignitor, I noticed that rust and dirt had built up around burner to pan connection.I used my oil filter wrench to turn slightly the burner to remove it from the pan to clean.Reassembled in reverse order.
Parts Used:
-
roy from East Providence, RI
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
140 of 158 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
mice had made nests in the insulation wrap in the range
I numbered every part. ex: 1 L., for first part removed left side. I used a magic marker to circle the holes and wrote the number of screws used on the part, set the srews in a separete place, so that I new where these screws went to. The cleanup was pretty time consuming, but I was able to keep my stove, when every repairman I called to fix my stove told me I was better off buying a new stove. ($600.00 stove 2 years old)Please Note: The insulation blanket needed for the entire stove is two pieces, the sides and top are one part # and the bottom and back, are another part #. I did not know this. I just purchased the top and sides. I got lucky, the back and bottom were still in good shape. So I guess I should have read the description of the part more carefully to see what it covers, before I ordered it. It took two people two hours to do the work, it was really nice to have an extra set of eyes, to remember what direction pieces of metal from the stove went. I would do it all over in a heart beat instead of buying a new stove.
Parts Used:
-
Wendy from Red Hook, NY
-
Difficulty Level:Easy
-
Total Repair Time:More than 2 hours
-
Tools:Screw drivers
99 of 137 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
porcelan on igniter broken (2)
remove 2 screws that hold element in place, remove element, replace with new element, and replace screws , replaced burner assy on other
Parts Used:
-
paul from mc neal, AZ
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
31 of 45 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!