This temperature sensor detects the temperature within the oven cavity. This oven temperature sensor, for ranges, works together with the oven control board to measure and regulate the oven temperatur...
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch...
Ask our experts a question about this model and we'll get back to you as soon as possible!
9 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Joanne
August 9, 2023
Display light partially lit. Can not read exact time or oven temperature.
Gas Stovetop & oven working. Have to use thermometer in oven to gage temp as can’t read display.
For model number AGR5330BAS3
Hello Joanne, thank you for contacting us. Based on the description that you have provided, we would recommend replacing the control board to fix the issue, the part number is PS11756245. We hope this helps, good luck with this repair!
Hello Lou, Thank you for reaching out. We have attached a How to Video for you. In the first part of the video it will show how to remove the Oven Door. Good luck with the repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
William
March 17, 2024
i have a p5h code and oven does work
For model number AGR5330BAS3
Hello William, thank you for your inquiry. Try unplugging your appliance for 5 minutes to do a hard reset. If unplugging is not easy to do, turn off the breaker for 5 minutes and do the same thing. This is actually the 'PSH' error code which stands for 'Push To Start'. If you do not press the start button within five seconds of a command that will display telling you that you forgot to PUSH the Start button. If it is randomly showing up by itself, you have a defective control board, part number PS11756245. We hope this is helpful!
Hello Monte, Thank you for your inquiry. We show the approximate BTU's for this model as 11500 btu's. We hope this helps and if you need a part in the future and need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
< Prev
1
2
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Opened up the back of the stove. Unpluged the sensor. Replaced the sensor. Replace the back of the stove.
The sensor that has been replaced is not what is expected. After reading all of the instructions for adjusting the temperatures, the only temp that stays steady is when we first turn on the oven to 350 degrees. That stays steady but when I turn it to 400 it slowly goes up to 425 degrees.
I numbered every part. ex: 1 L., for first part removed left side. I used a magic marker to circle the holes and wrote the number of screws used on the part, set the srews in a separete place, so that I new where these screws went to. The cleanup was pretty time consuming, but I was able to keep my stove, when every repairman I called to fix my stove told me I was better off buying a new stove. ($600.00 stove 2 years old)Please Note: The insulation blanket needed for the entire stove is two pieces, the sides and top are one part # and the bottom and back, are another part #. I did not know this. I just purchased the top and sides. I got lucky, the back and bottom were still in good shape. So I guess I should have read the description of the part more carefully to see what it covers, before I ordered it. It took two people two hours to do the work, it was really nice to have an extra set of eyes, to remember what direction pieces of metal from the stove went. I would do it all over in a heart beat instead of buying a new stove.
Google the error code that the range was displaying and found others with the same symptoms. Then found several people that had fixed the problem by replacing the oven sensor. I then ordered the sensor and replaced it, which fixed the problem.