Models
>
ADW662EAC
ADW662EAC Amana Dishwasher - Overview
Models starting with ADW662EAC
Click on the best match to narrow your results.
Keep searches simple, eg. "belt" or "pump".
Silverware Basket - Gray
PartSelect #: PS11743069
Manufacturer #: WP6-918873
This part has been redesigned by the manufacturer and is now a complete full basket with a handle and covers.
$35.39
In Stock
Door Gasket
PartSelect #: PS11746830
Manufacturer #: WP902894
This door gasket can be installed by simply pressing it into the channel around the door. This dishwasher door gasket, or door seal, allows the dishwasher door to have an airtight seal when closing th...
$89.00
In Stock
Dishrack Guide Rail Stop - gray
PartSelect #: PS11747648
Manufacturer #: WP99002135
This dishrack guide rail stop is made of plastic and is gray in color. It is an inch and a half long.
$14.00
In Stock
White Dishrack Roller
PartSelect #: PS11746834
Manufacturer #: WP903093
This upper dishwasher dishrack roller is just over an inch in diameter. It is all white in color and is made entirely of plastic.
$21.92
In Stock
Door Spring Linkage
PartSelect #: PS11746857
Manufacturer #: WP912653
This part provides more flexibility for the door spring.
$14.16
In Stock
Discharge Pump Housing
PartSelect #: PS2340910
Manufacturer #: 6-917075
This part is located under lower spray arm.
No Longer Available
Inner Door Foam Insulation Strip
PartSelect #: PS11748543
Manufacturer #: WPW10117748
This inner door insulation seal is almost twenty-four inches long. It is gray in color and is made of a foam material.
$46.18
In Stock
Impeller Assembly
PartSelect #: PS11747641
Manufacturer #: WP99002069
This impeller rotates and is used to force water up through to the spray arm.
$66.65
In Stock
Water Inlet Valve - 120V
PartSelect #: PS11747602
Manufacturer #: WP99001359
This water inlet valve is specially designed for those dishwashers of the vertical axis style and comes with a mounting bracket. The attaching solenoids on the valve open and close according to the de...
$91.91
In Stock
Lower Dishrack with Wheels
PartSelect #: PS1960964
Manufacturer #: W10139223
NOTE: Per factory, this substituted part only has 6 wheels instead of 8 and NO longer comes with shelf rack.
$484.22
In Stock
Hose Clamp
PartSelect #: PS11743008
Manufacturer #: WP596669
This hose clamp extends from half an inch to an inch in diameter. It is made entirely of metal and is intended for use with Maytag brand washing machines.
$11.68
In Stock
Water Deflector
PartSelect #: PS11747624
Manufacturer #: WP99001885
This black water deflector is sold individually. It is used to keep water away from the dishwasher door.
$16.64
In Stock
Common Symptoms of models starting with ADW662EAC
[Viewing 11 of 11]Leaking
Fixed by
these parts
these parts
Show All
Not cleaning dishes properly
Fixed by
these parts
these parts
Show All
Noisy
Fixed by
these parts
these parts
Show All
Will not dispense detergent
Fixed by
these parts
these parts
Show All
Will not fill with water
Fixed by
these parts
these parts
Show All
Door latch failure
Fixed by
these parts
these parts
Show All
Not draining
Fixed by
these parts
these parts
Show All
Not drying dishes properly
Fixed by
these parts
these parts
Show All
Will Not Start
Fixed by
these parts
these parts
Show All
Door won’t close
Fixed by
these parts
these parts
Show All
Lid or door won’t close
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Water dripping from right corner of door
Took out about 7 torx screws to remove the inner door liner. Discovered evidence of leak coming from the sop dispenser latch, and noticed the grommet had turned soft and was torn. The grommet is only about 1" square. Used nut driver to remove two screws to remove latch assembly. Slipped old grommet off and put new one on, and reattached the latch. The foam seal at the bottom of the door looked worn, so we replaced it with weatherstripping from home improvement store. The main door seal was brittle, so we replaced it too - just grab an end and pull the old one out. The new one was installed by starting at one end and we just pushed it in place. We used a nut-driver to push it in - we were afraid a screwdriver might damage it. The new door seal required us to latch the door to get it to stay closed the fist couple of days, but now it has loosened up a bit and works as expected. And NO MORE LEAKS. Cost is much less than a new unit!
Parts Used:
-
Tim from Ringgold, GA
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver
599 of 613 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Rack roller broke
I opened the end stop of the rack, replaced the roller, and put the end stop back on. I can't believe I paid the repairman the last time $125????? An he put in a regular screw that rusted and broke the roller. Took me 3 minutes! Thanks
Parts Used:
-
Kathy from Lombard, IL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers
497 of 502 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The utensil basket was old, bowed and the bottom was falling out.
I ordered a new replacement basket. The new one is a little different but it fits in the same place and takes up the same amount of room in the dishwasher. It looks very nice too.
Parts Used:
-
Janet from Plano, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
476 of 489 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!