1. Removed the back panel. 2. Disconnected the wires from the old switch while connecting wires to the new switch one at a time. 3. Installed the new switch and broke off the excess metal on the post which fits into the burner knob on front of the range. 4. Replaced the burner knob and replaced the back panel.
1. Removed brackets holding the cooktop in place. 2. Removed the cooktop. 3. Removed the screws holding the housing for the elements. 4. Removed bad element. 5 Connected new element. 6. Reassemble
Disconnect power. . . Remove control panel, pull wire connectors,[note location] remove old switch, install new, install wires, snip stem to length, set knob . . . Turn on power - works. [Note this is a live part even when not connected]
