Models > 79060721900

79060721900 Kenmore Range - Overview

Sections of the 79060721900

[Viewing 5 of 5]

Manuals & Care Guides for 79060721900

Click to download
Keep searches simple, eg. "belt" or "pump".
LEVELING LEG ASSY – Part Number: 5304509869
LEVELING LEG ASSY
★★★★★
★★★★★
(2)
PartSelect #: PS12364627
Manufacturer #: 5304509869
Sold Individually. These legs should be adjusted to make your appliance level on uneven flooring.
$9.81
  In Stock
Oven Door Seal with Clips – Part Number: 316239700
Oven Door Seal with Clips
★★★★★
★★★★★
(4)
PartSelect #: PS440011
Manufacturer #: 316239700
Also known as gasket.
$152.52
  In Stock
HANDLE – Part Number: 316545300
HANDLE
★★★★★
★★★★★
(1)
PartSelect #: PS2581853
Manufacturer #: 316545300
his oven door handle is for ranges. Wear work gloves to protect your hands when installing this part.
$138.88
  In Stock
Steel Washer – Part Number: 316008401
Steel Washer
PartSelect #: PS436497
Manufacturer #: 316008401
Size: 3/4 inch od x 1/4 inch id
$14.32
  In Stock
Oven Thermostat - 125V 60Hz – Part Number: 316032411
Oven Thermostat - 125V 60Hz
PartSelect #: PS2339203
Manufacturer #: 316032411
This part establishes and maintains the internal temperature of the oven cavity.
$220.33
  In Stock
Leveling Leg – Part Number: 316272900
Leveling Leg
PartSelect #: PS977569
Manufacturer #: 316272900
Sold Individually.
$27.79
  In Stock
Screw – Part Number: 5303288565
Screw
PartSelect #: PS461124
Manufacturer #: 5303288565
This is an authentic mounting screw, which works with ranges, wall ovens, cooktops and warming drawers.
$9.00
  In Stock
Thermostat Bulb Clip – Part Number: 5303284616
Thermostat Bulb Clip
PartSelect #: PS460519
Manufacturer #: 5303284616
$11.81
  In Stock
Wafer Head Screw – Part Number: 5303285179
Wafer Head Screw
PartSelect #: PS460629
Manufacturer #: 5303285179
$16.47
  Special Order
SCREW – Part Number: 316021109
SCREW
PartSelect #: PS436929
Manufacturer #: 316021109
Sold Individually.
$17.34
  In Stock
Screw - 10-16 x .486 – Part Number: 316089500
Screw - 10-16 x .486
PartSelect #: PS438422
Manufacturer #: 316089500
This screw is for the drawer handle on a range or oven.
$16.47
  In Stock
Oven Bottom Panel – Part Number: 316495901
Oven Bottom Panel
★★★★★
★★★★★
(1)
PartSelect #: PS1528546
Manufacturer #: 316495901
  No Longer Available

Questions And Answers for 79060721900

Ask our experts a question about this model and we'll get back to you as soon as possible!

1 question answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Roy
February 20, 2020
My oven doesn't heat up? Is it the element and if so what is the part number?
For model number 79060721900
PartSelect logo
Hello, thank you for your question. There are a few parts that could cause this issue in your appliance. First I would say test your igniters with a multi meter to see if they are working correctly or not. They should be reading between 0 - 1100 ohms to be working correctly. The other part you should check would be your oven temperature sensor. That can also be tested with a multi meter and should be reading between 1000 - 1100 ohms. If those three parts are fine however, then the issue may be in your control board. I hope that helps. Good luck with your repair.

Was this helpful?
Thank you for voting!
  • 1

Common Symptoms of the 79060721900

[Viewing 5 of 5]
Gas igniter glows, but will not light
Fixed by
these parts
Fixing Fixing
Show All
Little to no heat when baking
Fixed by
these parts
Fixing
Show All
Oven is too hot
Fixed by
these parts
Fixing
Show All
Will Not Start
Fixed by
these parts
Fixing
Show All
Oven not heating evenly
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Safety valve would not open
I am an HVAC tech by trade so it wasn't difficult to diagnose problem with safety valve. The hard part was being without an oven for a week. Repair was simple and effective--oven works good as new.
Shut off gas and unplugged oven. Removed floor of oven between broiler and bake section, used wrenches to disconnect gas line from safety valve in back of oven, used philipps head screwdriver to remove burner assembly and gas valve, reversed process to replace. Checked out operation--OK.
Parts Used:
Safety Valve
  • Ed from Darby, PA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers, Wrench set
125 of 157 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven getting too hot, no control on the heat settings.
First i want to thank you for the quick responce, i got my order in one day. Took top of stove off, took out the old part, put the new one in, made several test to adjust the heat settings put everything back together alls well, now my wife can cook things without burning everything, thank you from the bottom of my heart, a happy wife means a happy man. William L Zeis.
Parts Used:
Oven Thermostat - 125V 60Hz
  • William from Springville, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
20 of 32 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
A mouse living in my stove!
One night I found a mouse living in my stove. We found it literally living underneath the top of the stove (the part where the burners are that you have to lift up). The insulation on the inside of the stove was literally covered with mouse poop, dog food, dog treats, and scraps of food among other things. It was totally nasty and I thought we would have to buy a new stove. However, I searched online and found replacement insulation on PartSelects website and ordered it. It was cheap and the fix was removing old insulation, vaccuming out and cleaning the stove then replacing the insulation with the new one. PartSelect had a great price and shipped promptly.
Parts Used:
Insulation Wrap
  • Amy from Hughestown, PA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
15 of 20 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!