This is a flexible rubber cover that fits over the top of the sink drain. It opens up in the middle and will allow you to feed water or food items into a garbage disposal while keeping liquids and sma...
This Affresh Disposal Cleaner 3 tablets. Specially formulated to clean and remove odor causing residues with a powerful foaming action.
No Longer Available
Questions And Answers for 6011
Ask our experts a question about this model and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Allen
November 14, 2023
I dont have any problems with the disposal but IK need to drop it to repair plumbing behind it. I thought I knew how.
For model number 6011
Hello Allen, thank you for reaching out. We have researched and found that to remove the disposer, you may need to follow these instructions:
1. Disconnect the disposer wires from electrical supply.
2. Disconnect drain trap from disposer waste discharge tube with adjustable pliers.
3. Support the disposer with one hand and insert the end of the screwdriver into the right side of one mounting lug on the lower mounting ring.
4. Lift the disposer slightly and loosen the lower mounting ring by pushing or pulling the screwdriver to the left.
5. Turn the disposer upside down and remove the electrical cover plate. Loosen green ground screw and remove wire nuts.
6. Loosen three mounting screws, pry the snap ring off with screwdriver, and remove the mounting assembly.
7. Push the sink flange up through the sinkhole and scrape it out.
We hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Ask my grandson to replace it. He’s a genius. He used hammer to release the disposer circular latch. He then removed the old splash guard and installed the new one. Love him
I ordered from you the address cleaner for my Kitchen Aid Dishwasher. I was hesitant about ordering it because, in my experience, these tyo e products are a waste of money and never perform to a level of expectation! But the washer is new and nice and I want to take care of it so in ordered the cleaner. I popped the little pellet in where the detergent pods go. Vli send the door pressed "normal wash" button, shut the door and forgot about it. I forgot about it until I opened the door to put in dishes, ... And BOY!! The inside of the washer was shining so bright I had to put on my sun glasses!! It would have been difficult to not notice how clean the inside of my machine was! No kidding... I was really impressed... in faction glad I got this request for feedback... because I was wondering how to let you j now what a great product this stuff is!
Part was oversize, as furnished. So, we cut out the central working part and used silicone sealer to install into the disposal throat (above the old guard). Looks great and works like a charm!