Models > 38H-72T-EV

38H-72T-EV ((B40X)) Maytag Range - Overview

Sections of the 38H-72T-EV

[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
Standard Y-Frame Range Surface Burner – Part Number: WP660532
Standard Y-Frame Range Surface Burner
★★★★★
★★★★★
(2)
PartSelect #: PS11743366
Manufacturer #: WP660532
The manufacturer suggests replacing the receptacle at the same time.
$38.45
  In Stock
Surface Burner - 8 Inch - 2600W – Part Number: WP660533
Surface Burner - 8 Inch - 2600W
★★★★★
★★★★★
(3)
PartSelect #: PS11743367
Manufacturer #: WP660533
NOTE: The manufacturer recommends that you replace the burner receptacle at the same time.
$47.09
  In Stock
Terminal Block – Part Number: WPW10245259
Terminal Block
★★★★★
★★★★★
(2)
PartSelect #: PS11750972
Manufacturer #: WPW10245259
It provides a way of connecting individual electrical wires and offers protection of the device from electrical surges (voltages and/or currents).
$43.47
  In Stock
Oven Door Spring – Part Number: WP7803P058-60
Oven Door Spring
★★★★★
★★★★★
(1)
PartSelect #: PS11744749
Manufacturer #: WP7803P058-60
This oven door spring is six inches long, and is made of metal.
$21.74
  In Stock
Surface Element Kit – Part Number: 4392061
Surface Element Kit
★★★★★
★★★★★
(2)
PartSelect #: PS373085
Manufacturer #: 4392061
This kit includes two 8" elements, two 6" elements, four receptacles and any remaining hardware needed for installation.
$142.19
  In Stock
Lamp Switch – Part Number: 7403P196-60
Lamp Switch
PartSelect #: PS2089419
Manufacturer #: 7403P196-60
  No Longer Available
Oven Door Gasket – Part Number: 7201P036-60
Oven Door Gasket
PartSelect #: PS1643402
Manufacturer #: 7201P036-60
  No Longer Available
Hinge - Right Side – Part Number: 3418A030-34
Hinge - Right Side
PartSelect #: PS1603107
Manufacturer #: 3418A030-34
The hinges allow the door to swing up and down. The hinges must be properly adjusted in order for the door to close properly.
  No Longer Available
Thermostat Knob – Part Number: 7731P038-60
Thermostat Knob
PartSelect #: PS2091812
Manufacturer #: 7731P038-60
This knob accepts a D-shaped shaft.
$19.60
  Special Order
CORD-POWER – Part Number: PT500
CORD-POWER
PartSelect #: PS3507027
Manufacturer #: PT500
$52.28
  In Stock
CORD-POWER – Part Number: PT220
CORD-POWER
PartSelect #: PS407503
Manufacturer #: PT220
$39.21
  In Stock
DISCONTINUED – Part Number: 8002P020-60
DISCONTINUED
PartSelect #: PS1657061
Manufacturer #: 8002P020-60
  No Longer Available

Questions And Answers for 38H-72T-EV

Be the first to ask our experts a question about this model!

Common Symptoms of the 38H-72T-EV

[Viewing 5 of 5]
Element will not heat
Fixed by
these parts
Fixing Fixing Fixing
Show All
Will Not Start
Fixed by
these parts
Fixing
Show All
Door won’t close
Fixed by
these parts
Fixing
Show All
Little to no heat when baking
Fixed by
these parts
Fixing
Show All
Touchpad does not respond
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Burned terminal block and filter board
Removed and replaced above named parts, rewired.Be sure to tighten all nuts that secure wires. I believe this is what caused the problem.
Parts Used:
Terminal Block
  • Joseph from Decatur, GA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers, Socket set, Wrench set
90 of 192 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
1 had 2 large burners not working at all, and was cooking everything on the 2 smaller burners
It was so simple to repair - all I had to do was slide the older burners out and slide the new ones in - it took less than 10 min to complete the whole job! No tools used at all.
Parts Used:
Surface Burner - 8 Inch - 2600W Standard Y-Frame Range Surface Burner
  • Mary from Lebanon, CT
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
27 of 30 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Original burners were not working correctly.
I received my ordered in less than a week. It was great. The day I got them I remove the old burners and replaced them with the new ones. It took me about 3 minutes total. I was then able to cook my Christmas dinner with out any problems.
Parts Used:
Surface Burner - 8 Inch - 2600W Standard Y-Frame Range Surface Burner
  • Sharon from Phoenix, AZ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
13 of 18 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!