Whirlpool Washer Springs and Shock Absorbers

Videos!

Your Price

$137.05

Whirlpool Washer Suspension Rod Kit

★★★★★

11 Reviews

PartSelect Number PS12347546

Manufacturer Part Number W11130362

This suspension rod kit is a genuine OEM replacement kit that is compatible with various models of washing machine. The kit is responsible for supporting the inner tub of the washing machine and absorbing any excessive vibrations and movement caused during the washing and spinning cycles. This helps to protect the tub and interior of the washer from damage. If the suspension rods in your washer are faulty, you will likely notice loud banging, knocking, or scraping sounds as the tub makes contact with the washer cabinet. Each kit includes four suspension rods and springs as well as the suspension ball cups. It is advised you replace all suspension rods at the same time, as they tend to wear at similar rates.

Fixes these symptoms

Shaking and Moving
Spinning Issues
See more...

Videos!

Your Price

$13.26

Whirlpool Washer Suspension Spring

★★★★★

4 Reviews

PartSelect Number PS11743345

Manufacturer Part Number WP63907

The suspension spring supports the outer tub and keeps the tub steady during loads that could cause an unbalance. If this part breaks, is worn down or has stretched out and lost its spring, it could cause the load to be off-balance which can lead to excessive shaking, moving, noise, and leaks. For this repair, you will need a 1/4 nut driver, a putty knife, a flat blade screwdriver, and a pair of needle-nose pliers. Disconnect the power supply, fill hoses, and drain hose to give you safe and easy access (have a container nearby for water left in drain hose). This item is sold individually, which is important as you may need to repair multiple springs in your appliance, which carries three suspension springs. As an inexpensive part, we recommend purchasing several at a time, as they can be very useful to have on-hand.

Fixes these symptoms

Leaking
Shaking and Moving
Spinning Issues
See more...

Videos!

Your Price

$89.59

Whirlpool Washer Washing Machine Suspension Rod Kit

★★★★★

55 Reviews

PartSelect Number PS11703290

Manufacturer Part Number W10780048

This washing machine suspension rod kit includes 4 suspension rods, 4 suspension balls, and 4 bushings to stabilize the washer tub and minimize vibrations during operation. If the washer shakes or vibrates excessively, replacing the suspension rods may resolve the issue. Installation requires safety precautions, such as unplugging the appliance and wearing work gloves.

Fixes these symptoms

Shaking and Moving
Spinning Issues
See more...

Your Price

$113.97

Whirlpool Washer Suspension Rod Kit

★★★★★

18 Reviews

PartSelect Number PS11703288

Manufacturer Part Number W10780045

This suspension rod kit includes four rods that stabilize the wash tub, reducing vibrations and movement during cycles. It is compatible with a range of washing machines and helps improve performance by addressing unbalanced loads or excessive shaking. Unplug the washer before installation and consult the user manual for guidance.

Fixes these symptoms

Shaking and Moving
Spinning Issues
See more...

Videos!

Your Price

$8.92

Whirlpool Washer Tub Spring

★★★★★

21 Reviews

PartSelect Number PS11751118

Manufacturer Part Number WPW10250667

This part is used to balance the tub during spin cycle. Sold individually.

Fixes these symptoms

Leaking
Shaking and Moving
Spinning Issues
See more...

Videos!

Your Price

$12.62

Whirlpool Washer Tub Centering Spring - 2 Pack

★★★★★

9 Reviews

PartSelect Number PS3497596

Manufacturer Part Number W10400895

Tub centering springs. Comes (2) per package. Helps keep tub balanced and centered with the main top.

Fixes these symptoms

Shaking and Moving
Spinning Issues
See more...

Your Price

$136.90

Whirlpool Washer Suspension Rod Kit

★★★★★

5 Reviews

PartSelect Number PS12349409

Manufacturer Part Number W11217817

This suspension rod kit is designed to support the washer drum and minimize excessive movement during operation, helping maintain stability throughout the wash cycle. Each rod in the kit measures 26.5 inches in length and features a hook on one end for secure installation. If your washer is shaking more than usual, worn or damaged suspension rods may be the cause. It’s recommended to replace all four rods at once—even if only one appears faulty—as they tend to wear evenly over time. Installation may require basic tools and some disassembly of the washer. The kit includes four suspension rods along with their connecting components, and is provided as a standalone replacement part.

Fixes these symptoms

Shaking and Moving
Spinning Issues
See more...

Videos!

Your Price

$81.40

Whirlpool Washer Shock Absorber

★★★★★

10 Reviews

PartSelect Number PS11723173

Manufacturer Part Number W10822553

Sold individually. These shock absorbers keep the washer from vigorous shaking during its cycles. This shock absorber is for washers. Shock absorber absorbs the vibrations and movements of the outer washer tub. Unplug the washer before installing this part. Wear work gloves to protect your hands.

Fixes these symptoms

Shaking and Moving
See more...

Your Price

$145.22

Whirlpool Washer Suspension Rod Kit

★★★★★

3 Reviews

PartSelect Number PS12347544

Manufacturer Part Number W11130359

These rods help keep your washer drum steady during cycles, so it doesn’t shake or bang around. If your washer is noisy or feels unstable, the suspension rods might be worn out. This kit includes all four rods (about 27 inches long) and the parts needed to secure them. You’ll need a few basic tools to install them—like a screwdriver and wrench—and a bit of disassembly is required. It’s a genuine part made to fit your machine.

Fixes these symptoms