Whirlpool Washer Circuit Boards and Touch Pads

Your Price

$343.64

Whirlpool Washer Electronic Control Board

PartSelect Number PS16744838

Manufacturer Part Number W11603810

This electronic control board functions as the main command center for your washing machine, regulating everything from wash cycles to water drainage. When the board begins to fail, you may notice unpredictable behavior such as interrupted cycles or non-responsive controls. Replacing it can restore consistent performance and ensure your appliance runs smoothly. This component is designed to match original specifications and is compatible with select models across multiple appliance families.

Fixes these symptoms

Cycle Not Advancing
Draining Issues
Touchpad does not respond
See more...

Your Price

$343.64

Whirlpool Washer Cntrl-elec

★★★★★

1 Review

PartSelect Number PS16744865

Manufacturer Part Number W11607637

If your washer won’t start or the cycles aren’t working right, this control board might be the fix. It’s the part that runs the machine—handling settings, water flow, and spin cycles. This replacement works with many Whirlpool, Maytag, and Amana models. Just make sure to unplug your washer before installing and check your model to confirm it’s the right fit.

Fixes these symptoms

Cycle Not Advancing
Draining Issues
Water Filling Issues
See more...

Your Price

$359.95

Whirlpool Washer Electronic Control Board

★★★★★

1 Review

PartSelect Number PS16744868

Manufacturer Part Number W11608056

This electronic control board is the central component that manages all washer operations, including water levels, temperature settings, and motor functions. Acting as the appliance’s brain, it directs filling, washing, draining, and spinning cycles to ensure efficient performance and energy savings. Built for durability and precision, this control board helps resolve common issues such as constant draining, error codes, or failure to start. Installation is straightforward and typically requires only basic tools, making it a practical solution for restoring your washer’s functionality.

Fixes these symptoms

Cycle Not Advancing
Draining Issues
Touchpad does not respond
See more...

Your Price

$134.39

Whirlpool Washer Service Assembly

PartSelect Number PS16620391

Manufacturer Part Number W11552018

This microwave control board is a genuine replacement part designed to restore full functionality to your appliance. Measuring approximately 4 inches by 8.25 inches, it manages key operations such as power levels, cooking times, and cycle settings. A faulty control board may cause the microwave to become unresponsive, fail to start or complete heating cycles, or display error codes. In some cases, a burning smell may also indicate internal damage. For safety, always disconnect the microwave from power before installing the new board.

Fixes these symptoms

Touchpad does not respond
See more...

Your Price

$330.00

Whirlpool Washer Electric Control Board

★★★★★

1 Review

PartSelect Number PS16221218

Manufacturer Part Number W11498190

If your washer isn’t running like it used to—maybe it won’t start, fill, or finish a cycle—this replacement control board could be the fix. It’s basically the brain of your washing machine, telling it when to fill, wash, drain, and spin. It also keeps an eye on sensors and controls the water temperature and motor speed. If your cycles are too short, too long, or just not working right, swapping in a new control board can help get everything back on track.

Your Price

$75.11

Whirlpool Washer Electronic Control Board

★★★★★

1 Review

PartSelect Number PS16226925

Manufacturer Part Number W11481116

Experience hassle-free laundry days again with the Whirlpool Encoder Control Board. This essential part keeps your washing machine performing at its best by precisely detecting the position of your control dial and sending accurate signals to the electronic control system. This is an authentic OEM part from Whirlpool that helps your machine function like new again, by making sure all controls are read and understood correctly. So, whether you're doing a quick wash or a heavy load, this Encoder Control Board will ensure your washing cycle runs smoothly every single time. A point to remember: always unplug your washer and wear gloves for safety before installation. And don't forget to double-check compatibility. This part fits perfectly with selected models from not only Whirlpool but also KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef. So, if you've been racking your brains trying to figure out why your washer's not working as it should, the solution might be just an Encoder Control Board away. Start enjoying stress-free laundry days, because your washing machine deserves the best, and so do you!

Fixes these symptoms

Will Not Start
See more...

Your Price

$328.24

Whirlpool Washer Electronic Control Board

PartSelect Number PS16555170

Manufacturer Part Number W11513246

If your washer isn’t starting, spinning, or running through cycles correctly, the control board might be the problem. This part acts like the brain of your machine—telling it when to fill, wash, drain, and spin. Replacing a faulty board can fix issues like strange noises, skipped steps, or a washer that just won’t run. It’s a smart way to get your laundry routine back on track.

Your Price

$203.54

Whirlpool Washer Timer

★★★★★

1 Review

PartSelect Number PS871336

Manufacturer Part Number 285938

The timer controls most of the operations of the washer: water level, tub filling and emptying, length of cycles, and cycle setting sequences. Includes mounting screws.

Fixes these symptoms

Will not drain
See more...

Your Price

$297.80

Whirlpool Washer Electric Control Board

PartSelect Number PS12745370

Manufacturer Part Number W11411581

This control board is the part that runs your washer—it tells it when to fill, wash, rinse, spin, and drain. If your washer is acting up, like taking too long, not spinning, or draining unexpectedly, this part might be the reason. It runs on 120 volts and is part of the Empire Gila2 system. Built to match the original, it fits right in and gets your washer working like new again. Installation is straightforward but should be done carefully.

Videos!