See part 20 in the diagram
( Grid squares measure 1x1 inch )
Upper Front Felt Seal
$53.91
In Stock
In Stock
Get this part fast. Average delivery time via standard shipping: 1.8 days.
PartSelect Number PS975866
Manufacturer Part Number 134440200
Manufactured by
Frigidaire
Product Description
Upper Front Felt Seal Specifications
This part is the replacement upper front felt seal for your dryer. It is made of felt and is approximately 17 inches long and 1 inch wide. The felt seal allows the drum to glide smoothly on the front panel. If your dryer is noisy, will not tumble, or leaves marks on your clothes after the drying cycle, you may need to replace the upper front felt seal. This part is sold individually, so if you do not have any high-temperature adhesive, you will need to order that as well. Be sure to clean all the residue from your previous felt seal before you install the new one. This ensures a secure fit. This is an OEM part sourced directly from the manufacturer.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Noisy | Marks left on clothes | Will not tumble
This part works with the following products:
Dryer.
This part works with the following products:
Frigidaire, Kenmore, Westinghouse, Crosley.
Part# 134440200 replaces these:
AP3777104, 1061871, 5304433902
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Bruce
March 13, 2018
Cloths are getting pinched between drum and front panel on along top edge of drum....will replacing the felt pieces upper and lower on the drum fix this, if so does the glue that comes with the lower provide enough for both? or other parts. thanks
For model number GLER1042FS0
Hi Bruce,
Thank you for your question. The upper drum glide, part number PS470317, should fix this issue. The upper drum glide is attached to the front panel of your dryer, you can locate it by removing the top portion of your dryer. The drum glide allows the drum to rotate with ease and little sound. The front upper felt glide pad with three nylon glides also includes adhesive, essential for mounting accurately. One tube of adhesive, should be enough, but if you need another, the part number for it is PS474458. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Paulina
October 21, 2019
Hi there, i have a Kenmore dryer that looks like the felt has got snagged by something. Would this item work for my dryer? Or is there a better part? Thank you.
For model number 970-c82062-10
Hello Paulina, Thank you for the question. Sadly, we do not have any information on the model number you provided. Could you please verify the number you provided us with? If it is correct, I recommend contacting the manufacturer and seeing if they could provide you with a part number, and then you are always welcome to check back to see if we carry the part. Hope this helps!
Was this helpful?
Thank you for voting!
Kevin
January 2, 2018
I replaced the motor about 3 months ago from the front and thought i was done .But still not drying so checked my work and saw that the seal on the back was torn is this a problem if so how to fix it .I can't order a new one that i see online .So that do i do now.
For model number AGQ6000ES4
Hello Kevin, Thank you for your inquiry. If the seals/gaskets are leaking, that is one of the reasons it could be not drying. The other causes could be the gas coils, the blower, the sensors, the thermostats, and the limiter. You can test the parts with a multimeter. If you are unfamiliar with how a multimeter functions, there are YouTube videos available to assist you. Hope this helps!
Was this helpful?
Thank you for voting!
Part Videos
Replacing your Frigidaire Dryer Upper Front Felt Seal
Customer Repair Stories
Average Repair Rating: 2.8 / 5.0, 3 reviews.
What's this?
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
cloths getting caught along drum glide and lint trap and black streaks/sometimes tearing
1) pulled Dryer out from wall and removed top panel
-
Gabriellle from Vancouver, WA -
Difficulty Level:Easy -
Total Repair Time:15 - 30 mins -
Tools:Screw drivers -
24 of 31 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer would make squealing noise when used
First I removed the top of dryer by prying upwards with a screw driver to pop the clips that hold it in place,the second thing I done was to remove to screws that held the front of dryer in place,these screws are located in side the cover half way down.once tha twas completed I remove the front and took it out side where I used a wire brush to remove the old felt at least what was left.onced cleaned I applied the new felt using the supplied high temp glue and then used clothes pins to clamp the felt in place and left sit over night .next morning I installed with ease and all was fixed. NO MORE NOISE:)
-
THEODORE from INDIANAPOLIS, IN
-
Difficulty Level:Easy
-
Total Repair Time:More than 2 hours
-
Tools:Screw drivers
-
11 of 11 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
glides clicking paper clip in seal
removed top plus control panel laid on back then removed bottom panel and door panel. This made access to drum simple put new glides on and seals back together and running less than an hour.PS dont let little clips fall down in motor area pain to get out,also great time to clean out unit
-
bart from sullivan, IL
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers
-
5 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Filter By Rating:
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Sylvain S - December 30, 2020
Really easy repair although very expensive parts.
The parts were received in good condition on time well packed, no issue whatsoever. Your video is clear and the repair is easy. My only bad comment would be on the price. This is surprisingly a high price for a peace of felt and glue. Nevertheless, I am very happy with the end result. The noise disappeared for good.
Lars O - December 6, 2019
perfect
Couldn't be happier. With the help of your online videos I was able to identify the parts I needed, get them ordered. They arrived and fit exactly as expected
Related Parts
$50.50
High Temperature Adhesive
$50.50
PartSelect Number: PS474458
Used for installing felt and rubber seals on dryers.
Model Cross Reference
This part works with the following models:
PartSelect Number: PS975866
Manufacturer Part Number: 134440200
Manufacturer Part Number: 134440200
Brand
Model Number
Description