Average Repair Rating: 5.0 / 5.0, 1 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Service Tech Melted the funnel and housing for the ice maker
The trim, funnel and housing were removed. I exchanged the small electrical part to the new housing and reinstalled the housing, funnel and trim. It took longer to get the tool then it took to make the repair.
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Roblyn
November 26, 2017
How to install the ice chute funnel extension (which just fell off) on my refrigerator?
For model number PSC23SGRBSS
Hi Roblyn, Thank you for the question. You will need to line up the funnel extension with the lip of the dispensing funnel. Slip the lip of the dispensing funnel into the funnel extension channel. Push and work the funnel extension around the lip of the funnel. Continue working it around until the dispensing funnel extension fits securely around the funnel. Hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
William
March 5, 2024
How to replace ice funnel extension part # WR49X10076 on my GE side
For model number ZISB420DXC
Hi William, Thank you for reaching out. You will need to line up the funnel extension with the lip of the dispensing funnel. Slip the lip of the dispensing funnel into the funnel extension channel. Push and work the funnel extension around the lip of the funnel. Continue working it around until the dispensing funnel extension fits securely around the funnel. Good luck with the repair!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
The door recess crank for your refrigerator is located inside the water dispenser assembly. To access this part, you will need to take apart the dispenser assembly. To do this, you will need a putty knife and a Phillips ...
This part mounts in the ice dispenser. The crank no longer comes with this part but you can use original crank. The crank is sold separately depending on the model number of your appliance.
This part is a replacement recess grille tray for your refrigerator. This recess grille tray sits below the ice and water dispenser, and collects any spills. If your dispenser grille tray is broken or missing, this is th...
