This works in conjunction with the pump and filtration system. It is used to receive drainage for disposal.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Leaking | Not cleaning dishes properly | Not draining
This part works with the following products:
Dishwasher.
This part works with the following products:
General Electric.
Part# WD18X10026 replaces these:
AP3728341, 1088559
Customer Reviews
Average Rating:
★★★★★
★★★★★
8 Reviews
5.0
Filter By Rating:
5 Stars
8
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Jeff C - September 26, 2023
Verified Purchase
Part worked great!
Great service!
★★★★★
★★★★★
Mark P - December 8, 2022
Verified Purchase
Part fit well and work good
The part was a perfect fit. The repair was easy. Very pleased with the service.
★★★★★
★★★★★
Justin P - April 23, 2021
Verified Purchase
Sump manifold repair
Part was a direct fit after the old one literally disintegrated. Fast shipping. Will buy again.
★★★★★
★★★★★
Daniel H - July 21, 2020
Verified Purchase
Easy and rapid repair
Received the part in 3 days and i do the job. And now miss are happy
★★★★★
★★★★★
Paul P - April 5, 2020
Verified Purchase
Great part
The part arrived sooner than expected and it was good quality
★★★★★
★★★★★
Karla H - November 7, 2019
Verified Purchase
Easy install and repair
The part was easy and almost self explanatory for the install.
★★★★★
★★★★★
Claude S - October 29, 2018
Verified Purchase
Easy repair (even for a DIY-er like me), part fit perfectly.
Old part was easy to remove, and the new part fit perfectly and easily. I used the How To video on this website, and it was all the help I needed.
★★★★★
★★★★★
LAURA C - October 23, 2018
Verified Purchase
Easy to repair
It arrived fast
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 2.3 / 5.0, 3 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
sump inlet was partially dissolved
Disconnected electrics,plumbing, and removed DW. Replaced sump inlet by removing about four clamps. The inlet was partially dissolved. I think what lead to this is a partial clog, of broken glass and plastic. DW works fine.
Other Parts Used:
John from North Haven, CT
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Screw drivers, Wrench (Adjustable)
40 of 43 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Sump was leaking from previous repair person
Removed Dishwasher, inverted it and replaced the sump housing. There are 2 screws mounting the top of the dishwasher to the counter, a water connection and the electrical connection. Remember to turn the water off and the electricity off. Slide the DW out on carpet. Carried it to the garage to affect the repair. Reinstalled the dishwasher. Most difficult part of this is that the water hose is really short. I used a 6ft extension so that the next time I have to pull this out it will be easier.
Other Parts Used:
Jan from Boise, ID
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Screw drivers, Wrench set
19 of 27 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water leaking underneath dishwasher
went online to parts select. Looked at parts that could be leaking. Thought it was the sump. Purchased the sump and the pump connector. Almost bought the adaptor pump assembly, but it was $29.00. Parts arrived in about 2 days. Turned off water and power to dishwasher. Disconnected the copper water line. Hardest part was getting the dishwasher out of space. Once out, layed it on it's side. Parts held together with clamps. Took it apart like a puzzle. Replaced the parts, tightened the clamps. Pump connector hard to unscrew. Got a good hand grip on it and turned it loose. Sump did have a hole in it. Put everything back together. water, electric, etc. Turned it on and it was leaking. Leak coming from the adaptor pump assembly. Couldn't wait 2 more days.Found part at a local parts store for $40.00. Was able to change it by reaching underneath and not pulling dishwasher out again. All three parts needed to be changed. Dishwasher now working fine. If your leaking underneath and taking out the dishwasher change those 3 parts.
Ask our experts a question about this part and we'll get back to you as soon as possible!
12 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Glen
August 4, 2018
Is the sump #505 easy to replace? #wd18x10026
For model number 9280
Hello Glen, the sump is a very easy repair. To do this you would unplug the unit and turn off water supply then uninstall the dishwasher from its position, pull it out completely and put on its side. Remove the top sump clamp, and remove the three other clamps. Pull out the sensor, then remove the sump. You will reuse the clamps from the old sump. Remove the sump plate as well, to be reused. You would reinstall the plate into the new sump, then slide the clamps onto the
sump sleeves. Install the new sump. Slide in the check valve first, Push the sump on the top lip
and then slide the drain pump into the sump. Tighten the clamps, tile the appliance back upright
then reinstall the dishwasher into the opening and reattach the water supply and connect power. I hope this helps!
13 people found this helpful.
Was this helpful?
Thank you for voting!
Mike
April 22, 2018
The white rubber connector from the fine filter to, what i guess, the sump disintegrated. Is there a replacement connector or do i replace the sump? Thanks
For model number PDW8280J10SS
Hello Mike, thank you for your question. The white rubber connector that is right below the fine filter is part number WD18X10010. Please enter the part number into the site for current price and availability as well as a picture of the part. Good luck with your repair!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Lora
January 20, 2018
Is this the rubber connector between the motor and the sump?
For model number PDWT380R10SS
Hello Lora, Thank you for your inquiry. This is the white plastic sump inlet. It appears that the part that you are looking for may be part of the pump adaptor part# WD12X10308. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Lora
January 20, 2018
Does part # 505 need any extra clamps or seals ordered separately ? Also is this the rubber connector between the motor and the sump?
For model number PDWT380R10SS
Hello Lora, Thank you for your inquiry. This is the white plastic sump inlet, the clamps are sold separately. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Bryan
May 30, 2019
Will not drain. Check drain not clogged.
For model number Gsd3200j00
Hello Bryan, Thank you for the question. There are a few parts to check. You can start with the Piston and Nut Assembly, PartSelect Number PS260690. Body Valve and Drain Check, PartSelect Number PS260545 and the Impeller and Seal Kit, PartSelect Number PS259598 for any damage or wear. if everything checks out good, you may need to replace the Motor and Pump Kit, PartSelect Number PS260801. Hope this helps!
Hi i am running into the issue where the middle and top blades are no spinning, please help
Thanks
For model number ZBD6880K15SS
Hello Juan, thank you for your question. We would recommend cleaning the spray arm blades and filter under the lower spray arm and the sump. If cleaning the unit doesn't fix the problem, we would recommend using this to rebuild the circulation pump which pushes water through the unit. That is PartSelect Number: PS1017766. I hope this helps!
Was this helpful?
Thank you for voting!
Darrell
February 5, 2020
I see water leaking from the sump area. Could a bad sump be the problem?
For model number cdwt980r10ss
Hello Darrell, thank you for your question. Yes, the sump could be the issue or the Part #: PS1017766
Circulation Pump Impeller Kit that connects the sump to the circulation pump. I hope this helps.
Was this helpful?
Thank you for voting!
Robert
November 14, 2021
Is this part currently available. Our local repair business has not been able to find this part through their supplier.
For model number PDW8211J00WW
Hello Robert, Thank you for the question. According to the Website Availability, this is a Special Order part. This means we do not keep them in stock and order them in from GE once we have an order for one. As long as GE has stock ready to ship, this takes about 10-15 Business Days for the part to arrive at the Warehouse and approximately 3-7 business days to ship out and arrive top you. We hope this helps!
Was this helpful?
Thank you for voting!
Daphne
May 2, 2022
My model # is PDW 9280L00SS & I need a sump which one will work?
Thanks
D
For model number PDW9280L00SS
Hi Daphne,
Thank you for your question. The part number listed under your model number for the sump is PS959014. If you need the sump and filter housing, the part number listed for it is PS2370522. If you need help placing an order for these parts, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
The white rubber at the bottom to the coarse filter disintegrated. I can’t find a replacement part number. Will this cause the dishwasher to leak?
For model number PDWT580V00SS
Hello Don, Thank you for your inquiry. This is one of the parts that can cause this issue. We would also recommend checking the water inlet valve, the tub gasket, the fine filter, and the drain hoses. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
