GE/GE_Thumb/00121798i02.gif
See part 318 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 10PM EST

customerservice@partselect.ca

Spark Module - (4+0)

$71.02   Special Order

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS952864
Manufacturer Part Number WB13T10046
Manufactured by GE
Product Description

Spark Module - (4+0) Specifications

This part sends enough current to the igniter to create a spark to the bottom of the burner cap.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Will Not Start | Gas igniter glows | but will not light
This part works with the following products:
Range, Cooktop.
This part works with the following products:
General Electric, Kenmore.
Part# WB13T10046 replaces these:
AP3778816, 1063613, WB02X11172, WB13T10038
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

8 questions answered by our experts.
    Sort by:
    Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
    Al
    January 3, 2018
    Igniter won't stop sparking after burner lites. Happens on all burners from time to time.
    For model number JGP328BEC2BB
    Hi Al, Thank you for the question. If it is all the top burners that are sparking, you will need to replace the Spark Igniter Switch and Harness Assembly, PartSelect Number PS953094. Hope this helps!

    4 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Related Parts:
    Tim
    February 11, 2018
    Everything on the oven works but the broiler won't light. What are the most common possibilities. Also when the broiler is turned on and doesn't lite. I don't smell gas.
    For model number Jgsp48
    Hi Tim, Thank you for the question. Sounds like a defective igniter. If the igniter is weak it will not send enough volts to open the gas valve. Hope this helps!

    2 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Kenny
    November 27, 2017
    The back right burner (small burner) does not click/spark consistently, causing it not light. The other 3 burners work fine. Any ideas?
    For model number JGP328SEJ1SS
    Hello Kenny, Thanks for your question. The spark module is the most likely cause for your issue, though it is also worth examining the spark igniter switch and harness assembly. I hope this helps.

    2 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Related Parts:
    Joel
    September 9, 2019
    When i turn on the front right burner to ignite the gas flows and ignites but the clicking continues along with sparking from white ceramic thing.When i turn off the gas, the clicking and sparking continues. in order to stop it i must go to the breaker box and flip the switch off. here is my question. is it the spark module (ps952864) or is it the gas valve switch (ps 236791) that needs to be replaced? what do you think? thanks
    For model number JGP930SED1SS (General Electric) cooktop
    Hi Joel, thank you for your question. It could be either part. You would have to test both parts with a multi meter to determine if that part is the one that is not working. Good luck with your repair.

    1 person found this helpful.

    Was this helpful?
    Thank you for voting!
    Linda
    December 27, 2019
    Igniter switch will not turn off... the burner lights but clicking doesn’t stop... so i have to leave burner on or go crazy listening to it click
    For model number JGBS66EEK2ES
    Good Day Linda. Thank you for your question in regards to your unit (Model Number JGBS66EEK2ES). Based on our research, we discovered that one of the most common reasons a gas stove starts clicking is because the burner cap is out of alignment. In order to solve this issue, wait until the cooktop is completely cool, remove the burner grate to access the cap beneath it. Remove the cap and re-center it on the base. We would also recommend that you unplug your unit before you start this repair. Hope this helps. Best Regards.

    Was this helpful?
    Thank you for voting!
    Tim Hardwick
    September 23, 2017
    My electrode keeps clicking. After cleaning the counter top i accidentally got one of the electrodes wet. After about 30 minutes it started clicking. I turned the power off at the breaker box because that was the only way to make it stop clicking. I waited a few days to let it dry and all four burners are still clicking. Help!
    For model number JGP933SEK1SS
    Hi Tim, Thank you for your inquiry. If all the burners are clicking there could be excess moisture even though everything looks dry. You may have to remove the burner caps and at them air dry. If this does not help you may have to replace either the spark module or the spark electrodes. I hope this helps. Thank you and have a great day!

    Was this helpful?
    Thank you for voting!
    Roger
    March 18, 2018
    When "a" valve switch was turned on, burner b was sparked. When "c" value switch was turned on, burner b was sparked. Or when "d" switch was turned on, burner c was sparked. Not all the burners were sparked at the same time. Not sure this is a problem with the spark module (ignitor) or with the spark ignitor switch and harness assembly? Any help will be appreciated.
    For model number JGP932BEC2BB
    Hello Roger, Thank you for your inquiry. The spark ignition switch and harness is more likely to be the problem, but you can test the individual switches with a multimeter to see if they have continuity. If one does not, then the spark igniter switch and harness assembly would need to be replaced. Hope this helps!

    Was this helpful?
    Thank you for voting!
    Robert
    January 9, 2019
    Sometime igniter clicks sometime not only one burner other three always click and light fine harness switch or spark module
    Hello Robert, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. Look forward to hearing from you!

    Was this helpful?
    Thank you for voting!
      Customer Repair Stories
       Average Repair Rating: 3.4 / 5.0, 6 reviews. What's this?
        Sort by:
        Sorry, we couldn't find any existing installation instruction that matched.
        Spark would not turn off.
        Removed the burers using a torx wrench disconnected the spark wire then replaced the spark generator and the wire harness to the gas valves.
        Installation went smooth and easy.
        replaced the spark wire and re-assembled the burnners. very easy repair. replaced the sark generator though it didn't need it because I didn't want to un-assessemble the unit again at a later date.
        • Frank from Steilacoom, WA
        • Difficulty Level:
          Easy
        • Total Repair Time:
          1- 2 hours
        • Tools:
          Nutdriver, Pliers
        • Parts Used:
          WB18T10339, WB13T10046
        21 of 26 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        igniter wasn't lighting burner
        Repair to range went real well, Lifted range from

        counter. Removed eight screws that secure burner

        assembly. Lifted burners from it's position, and

        removed igniters. Installed heat srink at burner

        connections so as to ensure high voltage would

        have no leaks. Removed insulation, and installed

        spark module.. Reassembled unit, placed in

        counter cut out, put 110 volt cord into outlet.

        Tested all burners, everything worked great..

        The repair took about hour and 15 minutes.

        Have fun and be careful...... THE END
        13 of 20 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Spark module was not working correctly
        I unscrewed the burners which was three screws per burner then removed gas control knobs and pulled up range top and un hooked the old module and replaced it with the new one two screws hold it in place and connected it the same way the old one was and put range back together and now it works perfect and saved me over $250.00 and part only coated around $40 with shipping great parts seller and I highly recommend partselect.com very easy fix thanks
        • VINCENT from CYPRESS, TX
        • Difficulty Level:
          Really Easy
        • Total Repair Time:
          Less than 15 mins
        • Tools:
          Nutdriver, Screw drivers
        • Parts Used:
          WB13T10046
        8 of 9 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Gas coke top wouldn't lite
        First step is to turn off the electrical then disassemble the cook top. It is secured to pan by each of the burner mechanisms. Disconnect the spark wire from each porcelain drip pan. Separate the glass top from the pan. If it's stuck gently slide a putty knife int between the two to separate and carefully set the glass top aside. The spark module was a bit challenging in that the colors of the wires didn't match so if you aren't comfortable with electrical work I would get help. The module didn't fit the bracket so,I had to drill new holes and use self tapping screws to mount it. The other part part I intended to change was the spark igniter switch. Unfortunately the wiring was incompatible so I had to return that part. This top was sold by Kenmore but made by GE and is over 10 years old so I suspect an engineering change obsoleted my part. Overall the job wasn't that bad if you are reasonably mechanical..
        • James from ABINGDON, VA
        • Difficulty Level:
          A Bit Difficult
        • Total Repair Time:
          30 - 60 mins
        • Tools:
          Nutdriver, Screw drivers
        • Parts Used:
          WB18T10339, WB13T10046
        3 of 4 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Sparking at 2 different burners all by themselves
        Replaced Spark Module and adjusted igniters
        • paul from las vegas, NV
        • Difficulty Level:
          Easy
        • Total Repair Time:
          30 - 60 mins
        • Tools:
          Nutdriver, Screw drivers
        • Parts Used:
          WB13T10046
        3 of 7 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Igniters would not turn off
        Replaced starter switch harness as well as igniter module. Cost was around $70 for parts. Cheaper than a new cooktop.
        • Paul from UPLAND, CA
        • Difficulty Level:
          Really Easy
        • Total Repair Time:
          15 - 30 mins
        • Tools:
          Pliers, Screw drivers
        • Parts Used:
          WB18T10339, WB13T10046
        1 person found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
          Model Cross Reference
          This part works with the following models:
          PartSelect Number: PS952864
          Manufacturer Part Number: WB13T10046
          Brand
          Model Number
          Description
          Kenmore
          91132212101
          Cooktop
          Kenmore
          91132212102
          Cooktop
          Kenmore
          91132214101
          Cooktop
          Kenmore
          91132214102
          Cooktop
          Kenmore
          91132219101
          Cooktop
          Kenmore
          91132219102
          Cooktop
          Kenmore
          91132222101
          Cooktop
          Kenmore
          91132222102
          Cooktop
          Kenmore
          91132224101
          Cooktop
          Kenmore
          91132224102
          Cooktop
          Kenmore
          91132229101
          Cooktop
          Kenmore
          91132229102
          Cooktop
          Kenmore
          91132384101
          Cooktop
          Kenmore
          91132385100
          Cooktop
          Kenmore
          91132389100
          Cooktop
          Kenmore
          91133202101
          Cooktop
          Kenmore
          91133202102
          Cooktop
          Kenmore
          91133203101
          Cooktop
          Kenmore
          91133203102
          Cooktop
          Kenmore
          91133204101
          Cooktop
          Kenmore
          91133204102
          Cooktop
          Kenmore
          91133209101
          Cooktop
          Kenmore
          91133209102
          Cooktop
          Kenmore
          91136665895
          Range
          Kenmore
          91136665896
          Range
          Kenmore
          91136669893
          Range
          Kenmore
          91136669894
          Range
          Kenmore
          91136764100
          Range
          Kenmore
          91136765894
          Range
          Kenmore
          91136769892
          Range

          Get in touch, we're here to help!

          Open until 10PM EST

          Contact Customer Service