This drain hose is a replacement part for your top-loading washer. The hose measures 57 inches in length.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your General Electric Washer Drain Hose
Troubleshooting
This part fixes the following symptoms:
Leaking | Will not drain | Draining Issues
This part works with the following products:
Washer.
This part works with the following products:
General Electric, Hotpoint.
Part# WH41X10096 replaces these:
AP3419523, 1026050, WH41X10096, J85-639, WH41X367
Customer Reviews
Average Rating:
★★★★★
★★★★★
3 Reviews
5.0
Filter By Rating:
5 Stars
3
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Betty M - August 27, 2018
Verified Purchase
Perfect drain hose for McClary washer
I had a plumber replace our washer hose with the wrong generic hose and it leaked all over the floor so I looked up the right part, ordered it from PartSelect and it arrived within just a few days with the custom clamp to attach it. It even came with an installation video for each part, which made it a breeze to install correctly. Now, it works perfectly - no leaks at all. Thanks, PartSelect!
★★★★★
★★★★★
Paul A - March 26, 2019
Verified Purchase
Part arrived promptly, correctly and a easy installation
The part fixed the issue,
★★★★★
★★★★★
Kelly B - December 24, 2018
Verified Purchase
Easy repair
Washer is back working within a few minutes of receiving the hose
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.4 / 5.0, 48 reviews.
What's this?
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Old Hose Had A Leak
First I removed the screws that held the hose drain hose clip in place. Removed the damaged hose. Placed the new drain hose clip at the end of the new drain hose. Re-inserted back in hole, pushed in hose to necessary depth then tighted screws, Very easy and painless.
I attached the Drain Hose Clip to the Drain Hose Extension and then pushed the drain hose all the way into the drain hole in the back of the machine. I then screwed the clip to the machine. Done. Very painless. Fast delivery... ordered it on Monday, arrived on Tuesday.
Unplugged the washer and unscrewed the hot and cold filler hoses from the back of the machine. Removed the 6 screws holding the top together. Unscrewed the 2 water valve mounting screws. Pulled off the electrical wires from the leads. Unclipped the water feed hose clip. Reattached everything to the new water valve in reverse order. Put the screws holding the top panel in place back in.
For good measure, I also replaced the drain hose since I had noticed a little leakage there. Two screws and a little twisting and pushing was all that took.
Then I hooked everything back up and it worked like a charm. Finally, I went out to dinner with my wife on the money I saved!
After realizing I had purchased a used washing machine without a drain hose I thought I would never find one, but then I found partselect.com. After easily locating the part on the web site from the detailed diagrams and model number I then ordered it. Receiving the part quickly I used a socket to remove the plastic connector that prevents the hose from disconnecting once the washer is turned on. I fed the hose through the plastic connector and into the drain hole without any issues. I then used my one small socket to secruely fasten it back together. There was no additional tools or items needed to successfully attach the washer drain hose.
Other Parts Used:
Daniel from Oxford, GA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
10 of 11 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Hose would not seal at rear of washer.
The hose has a tapered end that fits in a tapered hole in the back of the washing machine.When insalled the first time,the joint leaked badly.My solution was to coat the hose end and the interior of the hole in the back of the washing machine with silicon sealant;let it set up for a few minutes and install the new hose.This solved the leak and the hose seems to be working fine now.
Other Parts Used:
Charles Wayne from Forest Hill, WV
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
8 of 9 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Leaking hose
Unscrew the 2 screws holding the drain hose clip to the machine - use bucket to get an excess water - remove bad drain line - I installed a new drain hose clip as well - make sure you put the clip on at the same position as the previous hose - push house firmly into opening and screw into machine - pretty easy repair - and I'm a novice
used a socket to unscrew the clip. pulled out the old hose, slid the new hose into the clip and screwed the clip back on. all fixes should be this easy.
Other Parts Used:
kartik from radnor, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
5 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
drain hose cracked, leaking water, when in use
It was easy, I just removed the old drain hose clip with a screwdriver. Next, removed the old, cracked hose, inserted the new one, and screwed the new clip in. The best part about this story is the incredible service I was given, by this company. I bought the machine at Sears, so I assumed I could find the hose their. No, they instructed me to go to Orchard Supply(their sister store), I purchased a drain hose, the clerk told me to buy, but the water was still leaking. So, I went on-line and found the right hose, and now I will continue to purchase what I ned for my machine from your company. REALLY Fast Service. Thanks
R&R Leaking/Damaged Hose and replaced it with the new one. One thing to be aware of is that after removing screws from the discharge hose upon removing the damaged one there was some water that did not expel from the unit so there was about a cup of water that came out. After removing the leaking hose you will need to remove the retaining plastic piece so that it can be placed on the replacement hose. Or if you ordered one put it on the hose so that it can retain the end of the hose in the washer. The anti-siphon clip is located about half way up the back of the washer it simply clips in place.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
11 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Tresa
April 29, 2018
Will a 10ft hose #98539 worth. What holds this hose in no place for clamp
For model number Wpre8150k2wt
Hello Tresa, thank you for your question. The Drain Hose Clip Part Number: PS270508 holds the drain hose into place at the back of the unit towards the bottom. The drain hose then comes up and goes into the drain port in your home to allow the water to drain our of the unit, up through the hose and into the drain in your home. Anti-Siphon Clip Part Number: PS271098 is used to hold the top of the drain hose into place at the drain port. I hope this helps!
14 people found this helpful.
Was this helpful?
Thank you for voting!
Brenda
February 27, 2019
I purchased a hose for GE washer on back it says to cut hose to make it fit. It's from plumb pak 6' corrugated discharge hose
For model number GLWN2800D1WS
Hello Brenda, Thank you for contacting us. Very sorry but Ia m not clean on the question. I can tell you the drain hose we list for this model number is PartSelect Number: PS890597 and is 57 inches in length. Please submit a new question if you have any follow ups.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Michael
February 15, 2020
Hello, i need a longer hose. The hose that came with my GE washer isn't long enough to reach the drain. Please guide me if possible
Hello and thank you for writing.
Your model number is needed.
Regretfully, but we cannot find parts, confirm compatibility or do research on questions without your model number.
Here is our link to help you find your full model number:
https://www.partselect.com/Find-Your-Appliance-Model-Number.aspx
We are looking forward to your response.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Carole
October 16, 2019
Washer will not drain
Hello Carole, thank you for writing. This is most likely due to a faulty Drain Pump, or faulty or clogged Drain Hose. We will need the model number for your washer to locate the correct replacement parts for it. We look forward to hearing back from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Lora
May 2, 2022
the tub wont drain. trying to figure out how to check for a clog somewhere?
For model number HSWP1000M4WW
Hi Lora,
Thank you for your question. If your washer is not draining, there are some parts that you will need to check to see which one is causing the issue. You will need to check the drain pump, the drain hose, the belt, the lid switch and the timer. We have included a link that you may reference on how to check these parts. Once you have determined the part you need, please feel free to call customer service. We are open 7 days a week and anyone will be happy to assist you. We look forward to hearing from you!
Hello Betty, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. Look forward to hearing from you!
Was this helpful?
Thank you for voting!
John
April 18, 2019
I’m looking for the part that’s in the washer , not the drainage hose but the part the drainage hose connects to , ( hose with rubber grommets )
For model number Gtwp2000m0ww
Hello John, thank you for your question. I believe you're looking for PartSelect Number PS272192. Please enter the part number into the site for current price and availability. Good luck with your repair!
Was this helpful?
Thank you for voting!
Judy
December 28, 2019
My Hotpoint washer will run water in but it will not fill to wash properly. They clothes are wet, but the tub is devoid of water. What is causing this problem?
For model number HTW200ASK1WW
Hello Judy and thank you for writing.
You should check your water hoses to make sure there is no blockage there and to make sure the water valves are open all the way. We hope this helps. Please contact us anytime if you require further assistance.
Was this helpful?
Thank you for voting!
Bob
July 16, 2021
Is there a longer hose available?
For model number GTW465ASNWW
Hello Bob, Thank you for contacting us. We have researched the model you have provided and have found GE does not list a longer hose. Our suggestion here would be to call the manufacturer and see if they can provide you with a substitution for these part numbers and contact us back with he updated substitution number. We hope this helps!
Was this helpful?
Thank you for voting!
Jenn
January 25, 2023
Do you sell an extension kit that fits this particular hose?
For model number HSWP1000M4WW
Hi Jenn, thank you for reaching out. Yes, the Drain Hose Extension for your model is part number PS273704. Please reach out to customer service if you need help placing an order, anyone will be happy to assist you. We hope that helps.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Affresh® Dishwasher Cleaner is the #1 recommended cleaner by Whirlpool, KitchenAid, and Maytag brands, designed to remove limescale and mineral build-up that can affect your dishwasher’s performance. These powerful table...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS890597
Manufacturer Part Number: WH41X10096
