Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
GARY M - November 3, 2022
Verified Purchase
Gasket Replacement
Easy repair, gasket worked great!
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.3 / 5.0, 3 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Worn out gasket on freezer
I received part. I then used a hair dryer to smooth out kinks. Took about 15 minutes. Pulled off old gasket and replaced with new one. Used hands only.
Other Parts Used:
Sherrie from COTTLEVILLE, MO
Difficulty Level:
Very Easy
Total Repair Time:
30 - 60 mins
9 of 13 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Freezer ice buildup
I replaced defrost sets, door gasket but still ice buildup freezer part.
Other Parts Used:
Pa Pa from BALTIMORE, MD
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Freezer Gasket was torn in some spots, freezer had condensation inside and could not maintain zero degree temperature.
Ordered gasket. Laid out gasket near sunlit window untangled and flat on carpet for 24 hours to insure it was pilable and correct shape. Removed the old gasket manually easily without any tools and cleaned the door's seal groove with a paper towel slightly soaked with Simply Green. Installed new gasket starting at the upper corners then inserting upper edge by tilting the gasket toward the inside of the door with my fingers. Then installed the lower corners along with the bottom edge. Proceeded installing the side edge working from the set corners inserting the gasket's inner tongue into the door groove with my fingers again tilting the gasket inside the door. Once the gasket was installed, I closed the door and guided my fingers along the gasket to insure the magnetic edge formed a firm seal. This is wear the DIY videos suggested applying petroleum jelly but I did not need it since the gasket was pliable enough. Overall, the effort took 15 minutes because I think laying out the gasket for 24 hours allowed it to settle into its desired form..
Other Parts Used:
Bryan from LANDING, NJ
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
8 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Juan
November 16, 2018
For the gaskest ,how do you stick the gasket onto the refridgerator door?Is glue already on the gasket ?
For model number pss26sgpass
Hi Juan, thank you for your question. You would press a flap on the gasket into the groove on your door to install this part. This video here may help you with the installation: https://www.youtube.com/watch?v=PuE_gu0CuK8. I hope that helps. Good luck with your repair.
5 people found this helpful.
Was this helpful?
Thank you for voting!
Dmitriy
January 8, 2019
We need to replace both rubber gaskets for refrigerator and freezer! Door sizes are different! Both gaskets come together in a kit or we have to order then separately?? please, provide with part or parts number?
thank you
For model number PSS26LSRC SS
Hello Dmitriy, thank you for your question. The gaskets are sold separately. The Fresh Food Door Gasket - Black is Part Number: PS8758487 and the Freezer Door Gasket - Black is Part Number: PS8758486. Please enter the part number into the site for current price and availability. Good luck with your repair!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Randal
August 22, 2019
I am having problems with the ice melting into a clump. Every thing else seems to be frozen properly, could this be a door seal issue?
For model number PSS26MSTD SS
Hello Randal, thank you for inquiring. Replacing this Freezer Door Gasket part number PS8758486 for your model may fix the issue, but it is more likely due to a faulty Temperature Sensor, part number PS304103 that is making the freezer a little too warm. I hope this helps and good luck with your repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Kristina
November 16, 2019
What part number is the correct one for my Hotpoint freezer model fv16cw
For model number FV16CW hotpoint freezer
Hi Kristina, sadly the requested part is discontinued, however you can contact the manufacturer to see if they have a suggested replacement. If they can provide you with a part number feel free to contact us back to see if we have the part in stock. Thank you for your question and good luck with your repair!
Was this helpful?
Thank you for voting!
Ola
June 20, 2023
Freezer door not latching properly. Gasket is lacking suction causing frost build up on the food. Can you please confirm the gasket serial number that I need to get?
Also, do you have to dis-mental the freezer door to install it. My freezer is full of food.
Thank you,Ola
For model number GSE26HMEBHES
Hello Ola, thank you for contacting us. The freezer door gasket, part number PS8758486, is compatible with your model. Replacing the gasket doesn't require removing the door. You will need to open the freezer door, peel the old gasket off in one spot, insert the flood disco driver, and start prying it out from that spot. Continue peeling the gasket off. Install the new gasket starting at the upper corners, then insert the upper edge by tilting the gasket towards the inside of the door with your fingers. Then install the lower corners along with the bottom edge. Proceeded to install the side edge, working from the set corners, and inserting the gasket's inner tongue into the door groove. We hope this helps, good luck with this repair!
Was this helpful?
Thank you for voting!
Larry
February 5, 2018
What seal do I need for freezer door. Can't find the exact model number to match seals that you have listed. Hope this is what is wrong with freezer. It looses cooling unless I wedge the door tightly closed. Then it cools down. It is the seal....right
For model number PS123GNDBS
Hi Larry, Thank you for the question. Yes, I would agrees that it sounds like an issue with the seal.I have researched the model you have provided and have found the part you’re looking for is PartSelect Number PS8758486. Good luck with the repair!
Was this helpful?
Thank you for voting!
Stephanie
May 10, 2019
Is the freezer gasket piece the same as the refrigerator seal that goes around the inside of the door. We are having troubles with the refrigerator closing properly from that black seal inside. It is throwing the temps off making the freezer colder and the refrigerator hotter. This part says freezer door gasket but i am looking for the refrigerator black inside seal that seals the door when closed.
For model number GSS25GSHGCSS
Hi Stephanie, thank you for your question. Your freezer gasket and fridge gasket are two different parts. I have linked the part information for the fridge gasket down below for you. You may need to replace your freezer gasket if it has warped and is now giving you trouble with closing the door. I hope that helps. Good luck with your repair.
I think i need a gasket part number ps8758486 because my freezer does not seal when closed. I assume it has lost its magnetic pull.
For model number ZFSB26DRDSS
Hi Mike, thank you for your question. Alright, this is the part that you are looking for according to your manufacturer and the model number provided. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
This part is the replacement fresh food door gasket for your refrigerator. It is made of black rubber and is sold individually. The fresh food door gasket runs along the circumference of your refrigerator’s fresh food do...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS8758486
Manufacturer Part Number: WR24X20455
