Ask our experts a question about this part and we'll get back to you as soon as possible!
14 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Kelly
March 12, 2018
The dryer does not heat. What part do i need
For model number GTD42EASJ0WW
Hi Kelly,
Thank you for your question. You are going to have to test some parts to determine what you will need. You will need a multi meter to test all of these parts. First you should test all of your thermostats and your thermal fuses. The ones directly on the heating element and the ones in the blower housing. You should also test your heating element directly as well. If all of those parts are fine you may want to then take a look at you door switch, start switch, and your timer. I hope that helps. Good luck with you repair.
9 people found this helpful.
Was this helpful?
Thank you for voting!
Walter
March 11, 2018
The dryer stopped heating. What part do I need to replace the heating element?
For model number HTDX100ED3WW
Hello Walter,
Thanks for your question. The heating element for your model is part number PS8756702. If you need the housing as well as the heating element, it would be part number PS9494500.
I hope this helps.
This dryer will run but not heat, on any setting. What part or parts should I order?
For model number GTD72EBSN0WS
Hello Vanessa, Thank you for your inquiry. We have researched the model you have provided and we would recommend checking the following parts to fix your issue: the heating element, the high limit thermostat, the cycling thermostat, the safety thermostat, and the inlet control thermostat or sensor. You can test the parts with a multimeter. If you are unfamiliar with how a multimeter functions, we have videos available to assist you. Good Luck with your repair.
I'm trying to locate a heat eliminate for my GE model gtdn500em1ws
For model number GTDN500EM1WS
Hello Chris, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS9494500. Thank you for your inquiry, good luck with this repair!
My dryer is not getting my clothes completely dry when on high heat and on the more dry setting for cotton' s any suggestions on to what might be going on i do feel heat coming out of my vent outside?
For model number GTD42EASJ2WW
Hello Ruben, thank you for inquiring. For this symptom you will want to replace either the Duct Felt Seal part PS9861764, the Drive Belt part PS1766009, or the Mica Heater part PS8756702. We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Wendy
December 10, 2023
Ok my dryer acts up sometime it took two hours to dry a fitted and a flat king size sheet then I put my blanket in it dried it fast and got super hot is it the thermostat the coil ?
For model number Gtd65ebsj3ws
Hi Wendy, thank you for the question. Based on our research, the most likely cause of this issue is a faulty cycling thermostat, part number PS11736632. You may need to check this part. If it is faulty, you may need to replace it. We hope this sorts out your problem!
1 person found this helpful.
Was this helpful?
Thank you for voting!
David
February 12, 2024
What should the ohms reading be on the heating element
For model number PTD90EBPT0RS
Hi David, thank you for the question. Based on our research, the resistance reading should be between 0-50 ohms. We hope this information helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Steven
March 21, 2024
Dryer only getting like 90 degrees what part do I need?
For model number GTD65EBSJ3WS
Hi Steven, thank you for reaching out. We would suggest checking the dryer cycling thermostat, part number PS11736632. It monitors and regulates the temperature inside the dryer. You may need to replace it to fix the issue. We hope that helps!
Was this helpful?
Thank you for voting!
Rebecca
December 11, 2023
Hello I was wondering what is the part number for this model heating element replacement as it stopped heating.
For model number GTD42EASJ2WW
Hello Rebecca, thank you for contacting us. The heating element you are looking for is part number PS8756702. We hope that helps!
Was this helpful?
Thank you for voting!
John
September 18, 2021
When i have the setting on high it seem like the dryer doesn't heat up as hot and it takes longer for the cloths to dry
For model number GTD42EASJ2WW
Hello John, Thank you for your inquiry. We have researched the model you have provided and we would recommend checking the following parts to fix your issue: cycling thermostat-PS11772030, the safety thermostat-PS11759043, the high limit thermostat-PS12073908, the blower thermostat-PS12171108, and the heating element. You also want to check your felt seals for any damage. You can test the parts with a multimeter. If you are unfamiliar with how a multimeter functions, we have videos available to assist you. Good luck with your repair.
