Ask our experts a question about this part and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Kathy
September 29, 2023
how to test switch # 316305100, re: will not turn off, stays on high. ty k
For model number EI30EF45QSA
Hi Kathy, thank you for getting in touch. To test the range switch, part number PS8746740, you may need to do a continuity test with a multimeter. Turn the dial to the maximum heat setting, and set the multimeter to the ohms or resistance. Now check for continuity between the L1 and H1 terminals. The multimeter should display a reading between 0 and 1 ohm. Then check from L2 to H2. If there is no reading and no continuity in either test, then the switch is faulty and will need to be replaced. The issue you are facing is most probably because of the faulty range switch. We hope this information helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
