Frigidaire/Frigidaire_Thumb/91QYOBOF.gif
See part 30 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.ca

Controller

★★★★★
★★★★★
2 Reviews
$49.43   In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS8689570
Manufacturer Part Number 5304491584
Manufactured by Frigidaire
Product Description

Controller Specifications

This part is both the start relay and the overload. The start relay boosts the compressor, and then shuts off as soon as the motor gets up to speed and the overload provides extra protection against excessive temperatures.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Won’t start | Too warm
This part works with the following products:
Freezer.
This part works with the following products:
Frigidaire, Kenmore, Uni, Gibson.
Part# 5304491584 replaces these:
AP5690408, 216649313, 216649318
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

1 question answered by our experts.
    Sort by:
    Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
    Clyde
    July 8, 2021
    I bought this part. The instructions say the wire colors should match, but the wires on the new harness are both white. The existing harness the wires are blue and white. Since the connector on the new is a different layout than the existing, I can't even match the locations up. How do I determine which side of the connector the blue or white wires of the existing harness should mate to.
    For model number FFU14C3AW0
    Hello Clyde, Thank you for the question. The terminal that is closest to the center of the relay will be the Neutral and the outer terminal will be the L1. We hope this helps!

    Was this helpful?
    Thank you for voting!
      Customer Repair Stories
       Average Repair Rating: 4.2 / 5.0, 5 reviews. What's this?
        Sort by:
        Sorry, we couldn't find any existing installation instruction that matched.
        Faulty Controller and Possibly Capacitor
        After building a test box and determining the Controller was bad simply ordered parts and installed. Installation was a little difficult due to locking spades on electrical connections.

        Unplug all power from freezer. Remove Bail wire from controller capacitor unit and remove from compressor by pulling STRAIGHT from compressor body to avoid bending contacts.

        Use a very small instrumentation screwdriver to release locking spade on yellow and white wires. To unlock slide screwdriver in slot along wire entry to controller body while gently pulling on wire. Note position of wires and replace on new unit in same position/order. Plug new run capacitor into new controller being careful to orient capacitor to proper position (hole matches guide on controller unit). Plug newly installed controller and capacitor into condensor and replace bail wire.

        Make sure timer is not in defrost mode - manually advance timer if necessary to ensure timer is in run mode. Turn temperature control to coldest setting. Plug in and hopefully enjoy the humming noise of your newly repaired and operational compressor and freezer.
        Other Parts Used:
        Run Capacitor
        • eric from inglewood, TN
        • Difficulty Level:
          A Bit Difficult
        • Total Repair Time:
          Less than 15 mins
        • Tools:
          Pliers, Screw drivers
        33 of 39 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Freezer compressor quit running causing freezer to defrost and ruin all contents.
        Very simple repair. Removed the bail that holds the compressor controller and run capacitor from the compressor, removed the controller & capacitor, inserted a very small screwdriver into the controller to compress the barbs that hold the electrical wires to the controller. Plugged in the wires to the new controller in the same position as the original, plugged in the capacitor and then plugged the entire unit back onto the compressor, replaced the wire bail, plugged in the freezer and repair was complete.
        Other Parts Used:
        Run Capacitor
        • Kenneth from Safford, AZ
        • Difficulty Level:
          Really Easy
        • Total Repair Time:
          Less than 15 mins
        • Tools:
          Screw drivers
        9 of 13 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Controller showed signs of the plastic housing had melted.
        I paid attention to how the old part came off. You need a small (very small) flat bladed screwdriver to release the two wires that plug into the controller. I checked that it was a bit difficult but it would had been easier if I could have found a screwdriver sooner.
        Other Parts Used:
        • Jim from Cherryvale, KS
        • Difficulty Level:
          A Bit Difficult
        • Total Repair Time:
          15 - 30 mins
        • Tools:
          Screw drivers
        3 of 6 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Compressor stopped running, freezer stopped freezing
        Upon Inspection of electrical connections I found the controller connector slightly melted, so I ordered a replacement and the other parts, given the freeezers age.
        Replacement efforts were close to plug and play.
        Compressor powered back up And freezer is now functioning again.
        Other Parts Used:
        DEFROST TIMER Defrost Thermostat Run Capacitor
        • Joseph from BANDON, OR
        • Difficulty Level:
          Very Easy
        • Total Repair Time:
          15 - 30 mins
        • Tools:
          Screw drivers
        1 person found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Compressor Stopped Running. Fan and lights still working.
        1. Ensure that the power is completely removed from the freezer. 2. Using needle-nose pliers and a screw driver, remove the wire retainer holding the controller assembly to the compressor and remove the controller assembly by pulling away from the compressor. 3. Cut the two wires from the existing controller assembly and strip the ends about a quarter of an inch. 4. Slide the heat shrink tubing over the wires of the connector provided with the controller kit. 5. Use the Blue Barrel connectors provided with the controller kit to connect the controller wires provided in the kit to the existing wires of the freezer. **Ensure that they are well crimped. 6. Using a heat gun, shrink the tubing to fit over the connector and wires. **Be careful not to overheat. 7. Plug the connector into the new controller provided in the kit. 8. Plug the controller assembly back into the socket on the compressor. 9. Reattach the wire retainer securely to hold the controller assembly to the compressor. 10. Plug in the freezer and adjust the thermostat so that the compressor energizes. If the controller was the issue your freezer should begin to cool.
        Other Parts Used:
        • Jerry from FORT SMITH, AR
        • Difficulty Level:
          Easy
        • Total Repair Time:
          15 - 30 mins
        • Tools:
          Pliers, Screw drivers
        1 person found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
          Customer Reviews
          Average Rating:
          ★★★★★
          ★★★★★
          2 Reviews
          5.0
          Filter By Rating:
          • 5 Stars
            2
          • 4 Stars
            0
          • 3 Stars
            0
          • 2 Stars
            0
          • 1 Star
            0
            Sort by:
            Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
              Model Cross Reference
              This part works with the following models:
              PartSelect Number: PS8689570
              Manufacturer Part Number: 5304491584
              Brand
              Model Number
              Description
              Kenmore
              25311311100
              Freezer
              Kenmore
              25311312100
              Freezer
              Kenmore
              25311312101
              Freezer
              Kenmore
              25311521100
              Freezer
              Kenmore
              25311521102
              Freezer
              Kenmore
              25311531100
              Freezer
              Kenmore
              25311531101
              Freezer
              Kenmore
              25311541100
              Freezer
              Kenmore
              25311541102
              Freezer
              Kenmore
              25312021101
              Freezer
              Kenmore
              25312541100
              Freezer
              Kenmore
              25313051100
              Freezer
              Kenmore
              25321021105
              Freezer
              Kenmore
              25321041105
              Freezer
              Kenmore
              25321041107
              Freezer
              Kenmore
              25321041108
              Freezer
              Kenmore
              25321401100
              Freezer
              Kenmore
              25321401101
              Freezer
              Kenmore
              25321402100
              Freezer
              Kenmore
              25321402101
              Freezer
              Kenmore
              25321402102
              Freezer
              Kenmore
              25321402103
              Freezer
              Kenmore
              25321411100
              Freezer
              Kenmore
              25321411101
              Freezer
              Kenmore
              25321411102
              Freezer
              Kenmore
              25321411103
              Freezer
              Kenmore
              25321421100
              Freezer
              Kenmore
              25321421101
              Freezer
              Kenmore
              25321421102
              Freezer
              Kenmore
              25321421103
              Freezer

              Get in touch, we're here to help!

              Open until 1am EST

              Contact Customer Service