Ask our experts a question about this part and we'll get back to you as soon as possible!
8 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Conrad
October 18, 2017
No power to the existing control panel. Breaker okay, power to the unit okay. Switch inside door latch has been replaced. What is the likelihood that the original control panel is the source of the problem?
For model number FDB1502RGS0
Hi Conrad, Thank you for the question. If you have power going to the appliance but the panel will not power on, I suggest replacing the Control Assembly. Hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Bill
November 13, 2017
Normal wash cycle never ends, 5hrs and dishwasher is still running. Which control panel controls the time?
For model number LFBD2409LFOB
Hi Bill,
Thank you for your inquiry. If you dishwasher is not turning off after a cycle is complete, then your dishwasher could be stuck in flood mode. What that means is that water has worked it's way down into the base pan below the dishwasher tub causing the unit to do nothing but drain. This is normally caused by the drain being clogged or too many suds in the tub causing the tub to overflow a bit. You will need to uninstall the dishwasher and then tip it forward at a 45 degree angle to drain the water out of the base pan. Once you have done this and reinstalled the dishwasher pour a gallon of water in the dishwasher and see if it drains out and does not wash or refill. If it does you still have water left in the base pan. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Ken
August 3, 2018
When starting a cycle, washer starts then stops, and both the hi temp and dry heat lights start to flash. I then need to restart the cycle all over again.I was told by a service tech that the control panel is going bad and needs to be replaced
For model number FDB1502RGC4C
Hello Ken, Thank you for your inquiry. This part 154852501 is the controls for the buttons and part# 154776601 is the main control board which controls all the functions. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Peter
October 16, 2022
Washer fills and drains but only washes sometimes
For model number 66513122K703
Hello Peter, thank you for reaching out. We recommend looking into the water inlet valve, part number PS8760080, spray arm, part number PS972316, and dishwasher filter, part number PS11759673. Check for any clogging or blockage, and replace the damaged parts. If you need help placing an order, customer service is open 7 days a week. Thanks again for your great question.
My dishwasher no longer starts right away and is still has water in the bottom of the unit at the end of the cycle. Does this have something to do with the timer?
For model number FFBD2411NB0A
Hi James,
Thank you for your question. If your dishwasher does not start right away, you may have pressed the delayed start button. The dishwasher can be delayed for 2, 4 or 6 hours. If you did not press the delayed start button, you will need to check the control assembly and the door latch with switches. It is normal for a small amount of water to remain in the bottom of the dishwater. This keeps the seals and gaskets lubricated. Usually, about 1 cup of water. If it is more than that, you will need to check the drain pump to see if it is clogged or damaged. We hope this helps with the repair!
Our electric has horrible power surges. Nothing works on dishwashers is the control panel normally the thing that goes out. What part do I need? The one that pulls up when I put the model number in is FFBD2409LSOA will that work.
For model number FFBD2407LSOA
Hi Mike, thank you for reaching out. We have concluded that the issue is with the electronic control board, part number PS12365196, which may need to be replaced. We hope this solves your problem!
It washes for a little bit then shut off power lights and everything go off.
For model number Ffbd2411nsoa
Hello Richie, thank you for writing. This could be due to a faulty Pump Motor, part number PS3497737 for your model. You may also want to consider this Control Assembly, part number PS8689162 as the cause. Good luck with your repair!
Was this helpful?
Thank you for voting!
Renhong
December 17, 2019
Not starts. I was told the fuse can't be replaced , only the whole control board should be replaced. What is the part number of the control board and the price? Any video to show how to replace it? Thanks.
For model number FFBD2411NB0A
Hi Renhong, thank you for your question. That would be this part: PS12365196. Unfortunately we do not have a video for installation on your model. However we have a lot of videos that may actually help you with figuring out this installation. It is fairly similar between most models and brands of dishwashers. You can view all of the videos that we have on our YouTube channel: https://www.youtube.com/user/partselect/search?query=dishwasher+board. Good luck with your repair.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
