Part Location Diagram of 154430501 Frigidaire Door Spring
See part 1 in the diagram
Replacing your Frigidaire Dishwasher Door Spring
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.ca

Door Spring

★★★★★
★★★★★
22 Reviews
$46.27
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS815938
Manufacturer Part Number 154430501
Manufactured by Frigidaire
Product Description

Door Spring Specifications

Sold Individually.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos

Replacing your Frigidaire Dishwasher Door Spring

Replacing your Frigidaire Dishwasher Door Spring
Troubleshooting
This part fixes the following symptoms:
Door latch failure | Door won’t close
This part works with the following products:
Dishwasher.
This part works with the following products:
Frigidaire, Kenmore, Crosley, Westinghouse.
Part# 154430501 replaces these:
AP3363442, 1014399, 154226001, 154226002, 154345901, 154345902, 154413301
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
22 Reviews
4.5
Filter By Rating:
  • 5 Stars
    15
  • 4 Stars
    4
  • 3 Stars
    3
  • 2 Stars
    0
  • 1 Star
    0
  • 1
  • 2
  • 3
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
  • 2
  • 3
Customer Repair Stories
 Average Repair Rating: 4.1 / 5.0, 23 reviews. What's this?
  • 1
  • 2
  • 3
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Dishwasher door practically fell open
All I had to do was replace the spring and retainer on the side of the dishwasher which amounted to pulling it out far enough to reach the eyelet that the hook went into and then stretching it to the retainer attached on the other end. I really like partselect, I have done some things in the past and they are very helpful on the site and on the phone and I would recommend them to anyone and I would not normally do that unless it has been an excellent experience.
Other Parts Used:
Spring Linkage
  • Daniel from Fremont, NE
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
52 of 58 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
One of the springs was broken, The door would not open or close properly. There was also a leak coming from the front of the dishwasher.
I removed the dishwasher from the cabinet space (two screws) and manually replaced both springs. I replaced one spring first to see if there would be an improvement when the second new spring was installed. There was much better tension once the second new spring was added.That is why changing both springs is recommended. This was very easy.
Changing the gasket was scary because I thought the the whole door would have to be taken apart. You know nothing ever goes back together the same. I feared that I would create an even bigger leak than what I had. Taken the door apart didnt work for me, so I just pulled the old gasket by hand and pressed in the new one. I made sure that it was seated correctly. Voila no leak.
The dishwasher is running as good as new.
I ordered these parts on Friday morning. They were on my door step Monday morning,
I highly recommend ordering from this site.
Other Parts Used:
Dishwasher Bottom Door Gasket
  • Ron from Montclair, NJ
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Screw drivers
17 of 19 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door spring had broken; door would fall open
Removed the bottom panel on the unit (2 screws hold it on) and pulled the dishwasher out about 4"--after turning off electricity to the unit. Removed the broken spring and the old linkage and replaced them with the new parts. Pushed the diswasher back into place, and replaced the bottom panel. Turned on the electricity and the diswasher door is "good as new." This is quite simple to do; just takes patience.
Other Parts Used:
Spring Linkage
  • Sue from Weymouth, MA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
16 of 16 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Installed springs, linkage, gasket, and bracket
Repair was easy. Unfortunately I really didn't need the springs or linkage, but I couldn't see that until I took the dishwasher out from the counter. The springs were not stiff enough to keep the door from just falling open. So I cut about an inch off the long end and bent it into a hook. I didn't need new linkages the old ones were fine. The gasket made the biggest difference and went in very easy. The door will be difficult to close for a few times then everything works great.
Other Parts Used:
Dishwasher Tub Gasket - Gray Lower Rack Bracket Spring Linkage
  • Mark from West Linn, OR
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
9 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Leak in hose, door leakage, weak door springs.
I received the parts 3 working days from order. They were in perfect condition and exactly like the originals.
Pulled dishwasher out from under counter. Removed door. Replaced drain hose. Replaced gasket. Replaced springs. Put door back on. Tried rinse cycle. Placed dishwasher back under counter. Works like new.
Other Parts Used:
Dishwasher Tub Gasket - Gray Spring Linkage Drain Hose
  • Ronald from Berwick, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
9 of 20 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
door won't spring back up to close
New right away when we heard the sound, the spring broke. Easy to replace, pull dishwasher out from under countertop, usually held in place by two screws into countertop. Remove screws, pull out dishwasher. Close door, springs will now have the most slack in them. One spring located on each side. Remove spring from one side and replace with new spring to ensure proper spring placement. No actual tools needed as spring rests on a bracket attached to door and other end of spring goes through hole in bottom of dishwasher rack. open door to test for tension as there are several holes to choose from. .
Other Parts Used:
  • MICHAEL from MIDDLETOWN, DE
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
6 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken springs
My daughter held the flashlight steady as a rock as I hooked not one, but two new hinges in place. Throughout the whole ordeal neither of us complained or lost our resolve. We conquered!
Other Parts Used:
  • james from Ephraim, WI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The door springs were shot.
Removed the bottom panel, and I had to disconnect the water supply, which did NOT use flexible tubing (much to my disappointment), removed the screws holding the diswasher in the cabinet. Slid it out, took the old springs off, put the new ones on.

It was pretty straightforward -- no big deal.
Other Parts Used:
  • Scott from Oshkosh, WI
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers, Wrench set
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door Spring broke
Removed the two screws that mount to count top pulled the dishwasher out to see how the spring was attached , installed the new spring and the job was done the job it took about 15 mins. to complete.
Other Parts Used:
  • Robert from BAY SHORE, NY
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The door springs were broken and the dorr was very heavy to open and close.
I removed the two screws and then moved the dishwasher out a little bit (about 6 inches). I pushed the dishwasher toward one side to make room for me to change the spring with my hand and repeated the same procedure for the other side. After the spring change, I turned an old dishwasher to a new one.
Other Parts Used:
  • Yangde from Raritan, NJ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
  • 3
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

2 questions answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Susan
February 20, 2020
Which door spring model nimber fits my Frigidaire dishwasher?
For model number FDB635RBS0
PartSelect logo
Hi Susan, Thank you for your question. The part number listed under your model number for the door spring is PS724932. To place an order for the part you may order it either online, by visiting our live chat sessions, Monday to Friday from 8AM to 4PM EST, or by calling our customer service line at 1-888-738-4871 and anyone will be happy to assist you. We hope this helps. Thank you and have a great day.

2 people found this helpful.

Was this helpful?
Thank you for voting!
Alaina
December 3, 2019
Can you confirm that this spring will fit my dishwasher model?
For model number FDB2810LDC0
PartSelect logo
Hi Alaina, thank you for your question. Yes, this is the part that you are looking for according to your manufacturer and the model number provided. I hope that helps. Good luck with your repair.

1 person found this helpful.

Was this helpful?
Thank you for voting!
  • 1
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS815938
Manufacturer Part Number: 154430501
Brand
Model Number
Description
Kenmore
58714000100
Dishwasher
Kenmore
58714000101
Dishwasher
Kenmore
58714000102
Dishwasher
Kenmore
58714001990
Dishwasher
Kenmore
58714001991
Dishwasher
Kenmore
58714001992
Dishwasher
Kenmore
58714001993
Dishwasher
Kenmore
58714002990
Dishwasher
Kenmore
58714002991
Dishwasher
Kenmore
58714002992
Dishwasher
Kenmore
58714002993
Dishwasher
Kenmore
58714003100
Dishwasher
Kenmore
58714008001
Dishwasher
Kenmore
58714008002
Dishwasher
Kenmore
58714008003
Dishwasher
Kenmore
58714009100
Dishwasher
Kenmore
58714009101
Dishwasher
Kenmore
58714009102
Dishwasher
Kenmore
58714012400
Dishwasher
Kenmore
58714012401
Dishwasher
Kenmore
58714012402
Dishwasher
Kenmore
58714012403
Dishwasher
Kenmore
58714012404
Dishwasher
Kenmore
58714012405
Dishwasher
Kenmore
58714012406A
Dishwasher
Kenmore
58714012407A
Dishwasher - DISHWASHER
Kenmore
58714012408A
Dishwasher - DISHWASHER
Kenmore
58714012409B
Dishwasher - DISHWASHER
Kenmore
58714012410B
Dishwasher - DISHWASHER
Kenmore
58714012411B
Dishwasher - DISHWASHER
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service