This part holds the ice once it's released from the icemaker. When activated, the auger rotates and pushes ice out of the bin through the chute to the user.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Ice maker won’t dispense ice | Ice maker not making ice | Noisy
This part works with the following products:
Refrigerator.
This part works with the following products:
General Electric, Hotpoint.
Part# WR17X11447 replaces these:
AP3204787, 1066440, WR17X11447, WR17X12108
Customer Reviews
Average Rating:
★★★★★
★★★★★
1 Review
5.0
Filter By Rating:
5 Stars
1
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Peter H - February 10, 2021
Verified Purchase
Sixty second Repair Job
Part arrived on time, installed with ease and working as promised. Crushed ice finally again.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.9 / 5.0, 25 reviews.
What's this?
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Ice maker would not dispense and made a loud clunking sound
First I replaced a cone shaped piece at the rear of the auger. That worked for about 20 minutes and it snapped off the middle. Same as original problem. Then I replaced the whole damn bucket and auger assembly. Works like new. Should have done that 1st and saved $24 and a week.
Other Parts Used:
Michael from Matthews, NC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
95 of 108 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Plastic circle rotor at back of ice bucket kept breaking into smaller plastic pieces that mingled with the ice and each time you got ice you had to check for plastic pieces.
Purchased new auger & bucket assembly and just put it into freezer and tossed out the whole defective bucket / auger assembly. It would have been too difficult to just replace the plastic disk / rotor at the back of the ice bucket; also soo expensive if a repair person were involved. Suggestion: make the back disk / rotor plate of more break resistant material, i.e. metal of tougher plastic. Thank you.
Other Parts Used:
Robert from Kalamazoo, MI
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
53 of 59 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice would not feed
Found that the plastic end piece was broken in two where the auger attaches at the rear of the ice tray. Purchased new one and installed. Lasted about 1 day. Purchased the whole assembly and it now works great.
Other Parts Used:
Albert from Houston, TX
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
32 of 35 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken Auger Assembly
First tried to fix old auger. Bad way to go. Spent $30 in parts and didn't work. Don't mess around. Order this whole thing, slide the old one out and the new one in and you're good to go. I wish I would have done this in the first place.
Other Parts Used:
DIANNA from POWELL, OH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
28 of 30 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
"plastic" retainer/bushing in rear of ice bucket damaged
Replaced plastic part and it immediately tore up. Ordered entire assembly, icebucket and auger. Replaced and is working fine.
Other Parts Used:
Lawrence from Wilmington, NC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
22 of 25 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
old unit was worn out from over use
simply push new ice bucket into position and your done. works better than new! saved 200.00 from calling in a tech for the repair. the part sent is a original GE part not an aftermarket part.
Other Parts Used:
Neal from Haverhill, MA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
18 of 22 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice would not dispense. Auger made clanking noise.
So easy.Remove. ice bucket, poured ice into replacement .Reinstalld. No tools. 3 minutes to do
Other Parts Used:
Gary from Katy, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
11 of 12 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
ice maker auger.bucket assembly did not dispense ice
removed the old assembly - slipped in the new one - worked great!
Other Parts Used:
Michael from Mesa, AZ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
10 of 11 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice cube guide on auger shaft sheared loose.
Pulled out old bucket asy. and pushed new asy. into position. Hardly worth talking about. More important is that this is a GREAT place to find appliance parts. Shipping is super fast too.
Other Parts Used:
Wayne from Streetman, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
7 of 9 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice Auger Broken Twice
This is second ice bucket auger I had to replace, don't know why it's breaking , but partselect was great to work with, replaced the broken part, was fast and very nice to help. I really appreciated their service. There was no repair, I mean, open the box, take out broken auger box, put in new one. No possibility of error.
Other Parts Used:
Robert from Weeki Wachee, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
6 of 7 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
3
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
7 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Tom
October 23, 2017
Does part number 357 within the ice maker rotate the auger or is it stationary.
For model number Pss26nhsbww
Hi Tom, Thank you for the question. The Helix (357) turns with the auger. Hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Harold
March 1, 2018
I only need the driver cup for this. I cant find it anywhere. How can i get just that?
For model number GSS25KSTASS
Hello Harold, thank you for your question. The drive cup for that ice bucket assembly is part number WR17X11459. Please enter the part number into the site for current price and availability. Good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Bob
August 5, 2018
Will this replace the bucket in my model? Looks the same but my model doesn’t show up on the list you provide as compatible. If this doesn’t can you give me the correct part #. Thank you.
For model number PSS26NSTESS
Hi Bob, Thank you for your question. This would be the correct part for your appliance. I hope that helps. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Robert
July 17, 2019
If it doesn't fir, can we return it for another.
For model number GSS25XGPBWW
Hi Robert, thank you for your question. Here is a link where you can view our return policy: https://www.partselect.com/Thirty-Day-Returns.htm. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Maureen
August 27, 2019
Even though my refrigerator is old should the ice maker have rusted as mine has?
For model number PSS26MGTCCC
Good Day Maureen. Thank you for your question in regards to your unit (Model Number PSS26MGTCCC). We do apologize but we were not able to locate the information you requested. For more specialized assistance or to speak with someone about this, we recommend calling the manufacturer of the equipment directly. They may be able to provide you with the part number that you need. Once you have this information, please feel free to check back with us for pricing and availability information. Best Regards.
Was this helpful?
Thank you for voting!
Michael
January 5, 2023
Does this part fit my refrigerator?
For model number PSS29NGPAWW
Hi Michael,
Thank you for your question. This would not be the correct ice bucket and auger assembly for your refrigerator. The part number listed under your model number for the ice bucket and auger assembly is PS1483303. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
Is there an ice maker part for this model available
For model number pss26m2tbss
Hello Ed, thank you for your question. The ice maker for your model number PSS26MSTBSS is part number PS1993870. This part can be located on our website, and the order placed online, by calling our customer service center, or by our Live Chat option. Good luck with your repair!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
