When energized, the water inlet valve will release water from the supply line into the ice mold and the water dispenser in the refrigerator. If the ice maker is not making or dispensing ice, not dispensing water, or leaking, you may need to replace the water inlet valve. The water inlet valve is in the back section of your refrigerator and will need to be pulled out from the wall. Make sure to disconnect both the water and power supply before starting your repair.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Ice maker not making ice | Leaking | Ice maker won’t dispense ice | Not dispensing water
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Alain D - June 22, 2021
Verified Purchase
Excellent
Simple and easy to install
★★★★★
★★★★★
Clare G - June 9, 2020
Verified Purchase
Great part
Received part in 3 days after order. Hey I live Northern Ontario Part matched exactly as defective one only beef was price but if u need it what r u going to
★★★★★
★★★★★
Robert P - January 7, 2020
Verified Purchase
Worked like a charm
Despite zero help from Frigidaire, who discontinued the inlet valve on my 5 year old Gallery fridge. The staff person helped me find a valve close to mine. I now have ice cubes again. Take that Frigidaire!
★★★★★
★★★★★
Cynthia L - August 14, 2019
Verified Purchase
Inlet valve
The part came in super fast but it turns out that we need the whole ice maker :(
★★★★★
★★★★★
Tina I - May 13, 2019
Verified Purchase
Less pressure.
The part was delivered fast and in good condition however it was not quite the right size inlet/outlet. Had to get a reducer and now the pressure is less for the water dispenser.
★★★★★
★★★★★
Bruce B - March 11, 2019
Verified Purchase
Worked
The part was perfect, came quickly and was easy to install. Ice maker is working again.
★★★★★
★★★★★
Andy P - December 13, 2018
Verified Purchase
was exactly as detailed, along with the reapir
No surprises, looks nearly identical, and preforms as advertised.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.3 / 5.0, 12 reviews.
What's this?
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Was not filling the ice tray full.
I had put in a new ice maker and it still had the problem, (I needed the Ice maker anyway) I installed the vale and while I was at it I put a five year filter on the water line that went from the value to the Ice maker, it took less than one hours, the ice is making like it did when it was new, I could not be more please at theis time. Thanks for your Interest. God bless.
Other Parts Used:
Orville from Garland, TX
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
59 of 91 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice Maker water would constantly drip. Forming a huge block of Ice.
Pulled refrig away from wall, shut off water supply. Removed two screws holding the old water value on the back of the refrig. Removed the two water lines from the value. Hooked water lines up to the new value and bolted the two screws and the new value on. Turned on water and pushed refrig back into position. Simple and it worked. No more huge blocks of ice. I have Cubes!!!
I removed a couple of screws from the old part, and inserted the new part. Replaced the screws and I was done. No problem. I'm an almost 60 year old woman, and fixed this myself. It was so easy.
Other Parts Used:
BARBARA from DIAMOND, IL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
27 of 37 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water Valve was leaking water and not making ice
I unplugged the fridge and unscrewed the back cover,unscrewwd the two screws holding the water valve in place and the water line to the ice maker and the electrical connection and install the new water valve,then buttoned everything back up and plugged the fridge back in and it is working great,making ice as normal.
Other Parts Used:
timothy from georgetown, TN
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers
13 of 28 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice maker stopped working
Took off old part and installed new part
Other Parts Used:
Fred from Las Vegas, NV
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
11 of 18 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Warter valvr cracked
It was real easy but I still have problem making ice cubs Fell problem is in the ice maker went it dose make cubs they don,t dump
Other Parts Used:
Louis from Damascus, PA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
7 of 13 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The water valve for the ice maker was bad
Pulled the refrigerator out from the wall. Then unplugged it took my nutdriver with a1/4" socket on it and took out the screws from the cardboard back on the bottom of the refrigerator. Then I removed the two screws holding the water valve on. Then I unscrewed the supply water line from the main water inlet valve. Then I removed the outlet waterline going to the ice maker from the water valve. Then I reversed the procedure to put it back together. Hooked up the main water line and turned the water valve on for the water to flow to the valve at first nothing happened had to wait for a couple of hours for everything else to get to the right temperature before the ice maker would start making ice.
After installing new ice maker water was not running into the ice maker.
Shut off water supply under the sink. Removed old valve and installed new valve. Turned water back on and within a couple hours the first batch of ice made.
Other Parts Used:
Leah from Tecumseh, OK
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Pliers
5 of 9 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Icemaker stopped making ice and i knew it wasnt the mechanism since I could hear that working when I unplugged and plugged the unit back on.
I found a couple of videos online of a similar product fix to get a lay of the land. When I got the part, I unplugged the unit and turned off the water. It was easy to take off the back panel and remove the old water intake valve to swap it out for the new one. Once I attached everything again I could see that the valve was taking up water but it didnt seem to be going all the way to the icemaker. I gave it some time and by the next day, there was fresh ice!
Other Parts Used:
Jennifer from BUFFALO, NY
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
3 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The fan had stopped spinning. According to the internet it should spin freely if I use my hand, but it wouldn't.
After pulling the fridge away from the wall and opening the paper backing on the bottom, I could see the motor. It's affixed to 3 metal ribs by 3 small screw/nuts. There is also a 12" wiring harness that led to a simple disconnect. Removing the disconnect and the 3 nuts was easy. However, there was no room to remove the motor with the fan attached. Between frame parts, the drip pan below, the ribs, and small, delicate copper tubing that can't get bent, it wouldn't fit thru any openings. So we rotated the motor inside the framework until the blade faced out, then reached in with a pair of needle nose pliers to remove the washer. Removing the washer is easy, it's just difficult to reach. With the washer off the fan was out of the way and very carefully (it was tight) the motor came out. Reverse was the same issue. Motor tight going in, not a lot of room to maneuver fan onto motor, and needed needle nose to tighten washer again. Make sure you tighten the washer before you install the motor on the prongs. Otherwise you need to remove it from the ribs, twist it to face you, then reinstall it on the prongs. Also, I felt I was stripping the nuts into the new motor. Turns out the holes in the motor aren't tapped. i realized the nuts are self tapping once I looked at them. I'm a big time DIYer and this wasn't bad at all. If your motor/fan assembly comes out whole, it's even easier.
Other Parts Used:
Patrick from RICHWOOD, TX
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
20 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
John
February 1, 2018
The icemaker makes ice and then cycles through until the icemaker is replenished with water. Then it turns off - but then it recycles again before ice is made, and refills with water again and again. Thus, creating a large block of ice. It doesn't appear to be the water valve - but the icemaker itself is not properly cycling after it dispenses ice cubes. What do you think?
For model number PLHT219TCBN
Hello John, thank you for your question. It sounds like the water valve is working, as its bringing water up to the unit. However, it may be staying open just a bit, and allowing water to slowly accumulate in the icemaker and then you end up with a block of ice. I would check to see if you can notice any water coming out of the inlet tube, test the valve, and if that is not the issue the only other possibility would be the icemaker itself. I hope this helps!
14 people found this helpful.
Was this helpful?
Thank you for voting!
Ray
October 14, 2017
Replacing water inlet valve, how do i reinsert the water line to the bottom of the valve
For model number glrt188wdlb
Hi Ray,
Thank you for your question. If your old water line has a nut on the end, you will have to cut that nut off. The water valve has a new quick connect. Once you have cut that nut from the end of your water line, you can just push the water line into the water valve. Good luck with your repair.
8 people found this helpful.
Was this helpful?
Thank you for voting!
Jay
March 26, 2020
Hi there, i’m trying to troubleshoot this ice maker issue on my Kenmore freezer. I got a new water solenoid/valve from you and installed but still not getting water to the ice maker. You think i need to replace the ice maker itself?
For model number 253.44733106
Hi Jay,
Thank you for your question. If you have just replaced your water inlet valve, it can take up to 24 hours for the ice maker to start working. If it is has been more than 24 hours since the ice maker has been installed, then check the water lines and the water filter to see if there are any clogs. Also, make sure that the water lines are fitted correctly. If all of this checks out fine, you will need to check the water inlet valve with a multi-meter to see if it is working. Set your multi-meter to the Rx1 setting and touch the terminals with the probes. You are testing for continuity and should receive a reading of 200 to 500 ohms. If you receive any other reading, you need a replacement water inlet valve. We hope this helps. Thank you and have a great day.
7 people found this helpful.
Was this helpful?
Thank you for voting!
Craig
January 20, 2018
Is there a trick to installing the hose to this unit? Do I need glue?
Hello Craig,
Thanks for your question. You may need to cut the end of the hose to help fit it into the valve.
I hope this helps.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Jessica
May 15, 2023
The water is filling up in the ice maker but it is coming out in blocks and water is leaking into the bucket.
For model number 79574012411
Hello Jessica, thank you for the question. It appears your model has a malfunctioning water inlet valve. You may need to replace the water inlet valve, part number PS11706285. We hope this helps.
We installed new filter still not getting water to ice make we have water at the filter but don't go through filter
For model number FGUI2149LP1
Hello Patty, thank you for your question. We would recommend testing the water valve. It sounds like the water valve that provides water to the filter first is not opening to allow water to come through the filter. I hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Aaron
July 17, 2019
How do I know if my ice maker is bad it is not making ice
For model number 25370502413
Hello Aaron, Thank you for the question. If the ice maker is filling with water but not making and dumping ice it may be defective. If it is not filling and the water filter has been changed in the last 6 months you can try to fill the ice tray with water to see if it makes and dumps ice normally, if so you may have a defective Water Valve.If it still does not make and dump ice then it is a defective4 Ice Maker. Hope this helps!
Opened freezer and the ice maker tray was full of water
For model number LGHT2137NF3
Hello Daniel and thanks for writing.
Yes. Part Number:242252603 is in the list of compatible items for your model and should fix this problem . Hope this helps . Please contact us anytime.
Was this helpful?
Thank you for voting!
Duane
March 14, 2020
Will this unit work if i have a copper supply line going to the refrigerator?
For model number FRS26KR4DQ0
Hello, Thank you for your question. It looks like the valve for your model is: PS7784018. This part says it will work with your model. We hope this helps.
Was this helpful?
Thank you for voting!
Shaun
August 16, 2021
My ice maker seems to be having trouble dumping the ice. It takes forever for the ice to break and pop out. Is this a bad icemaker or some other part. Once the ice dumps it does refill with water
For model number LGHT2137LE3
Hello Shaun, Thank you for the question. Normally this is an indication the Heater in the Ice Maker try could be weak or defective and the Ice Maker will need to be replaced. We hope this helps!
