Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Joanne V - March 12, 2021
Verified Purchase
Easy repair
We ordered this part as a replacement for an after market ice maker that we installed in our kenmore fridge. It came really quick and just had to cut a little off the end to make it work good.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.3 / 5.0, 1 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Water was leaking from the valve/pump for the icemaker
Remove the screws that hold the old valve to the side of the refrigerator. Next, detach each plastic tube and attach that tube to the same place on the new valve, and repeat (there are many valves). Afterward, I realized that many of the plastic tubes had become brittle and had mineral deposits, so I bought additional tubing for ice makers and replaced each tube, one at a time.
Ask our experts a question about this part and we'll get back to you as soon as possible!
8 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Bob
November 2, 2017
How do you replace this part? Do you have a video?
Hi Bob, Thank you for the question. After removing the water line by unscrewing the fitting, You will need to turn the fill tube counter clockwise to about 11:00 and then pull straight out.Next line up the notch on the new fill tube with the tab on the back of the appliance above the hole and insert the tube. Once it is in you turn it clockwise to lock into place.Hope this helps!
7 people found this helpful.
Was this helpful?
Thank you for voting!
Craig
July 9, 2019
Keep having this problem with ice building up on the evaporator fan. I take off the back panels, to remove the ice collecting around the fan motor. Can't find any leaks where the water comes into the ice maker. Your help will be appreciated.
For model number FFHS2622MSJ
Hello Craig, thank you for your question. If the evaporator fan and area are building up with ice, we would recommend testing the defrost heater, defrost thermostat, evaporator fan motor and thermistor pt # PartSelect Number: PS8760187. I hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Alan
January 8, 2020
My ice maker leaks water out of the ice tray causing ice to build up in the cube box. The frige is level and the ice maker works but how do i stop the water from leaking out of the tray? What do i look at?
For model number FFSS2614QS6A
Hello Alan and thank you for writing.
It certainly sounds like it could be a faulty water inlet valve PS7784018, you should check for signs of damage, and replace if necessary.
You also should make sure that the water filter was replaced recently with an OEM filter PS3412266. We hope this helps. Please contact us anytime if you require further assistance.
I had a problem with this part a year after purchase. Water was running behind back panel and freezing on fan. Frigidaire repairman came, took the panel off and removed ice. I had several icings again, took the panel off myself to dislodge ice. Repairman was finally called again, discussed my issue with company. Found the water tube was flawed. Mine was an open tube, company said it should be a closed tube. Certified Frigidaire repairman duct taped the open tube instead of replacing it with updated closed tube. Well, the duct tape has sprung a leak, which caused quite the mess as you can imagine. I notice the suggested replacement tube is also open. This can't be correct. (#51 water tube)
For model number FFSS2614QP6A
Hello Linda, Thank you for writing. Sadly, the closed tube part you are requesting we do not have listed. We strongly recommend you contact the manufacturer, as they would have this information in their system. Ask them for the part number you require and contact back to see if it is something we carry. We hope this helps!
Was this helpful?
Thank you for voting!
Donald
April 20, 2018
Can the new water tube be installed without removing the entire back covering inside the freezer?
Hello Donald,
Thanks for your question. Yes, if you pull out the fridge, the water tube can be accessed on the back of the appliance itself via a compression nut holding it in.
I hope this helps.
Was this helpful?
Thank you for voting!
Donald
April 21, 2018
Ordered and replaced water tube per your instructions. Water continues to leak/drip for a few moments where it exits refrigerator in front panel. Is there a closure valve or cock for the water aperture?
For model number FRG7763975 (water tube)
Hi Donald,
Thank you for your question. If water is dripping from the dispenser for a few moments after use, then the issue may be with the switch that controls the solenoid and you will need to check it with a multimeter to see if it is working correctly. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Lee
April 22, 2019
I have water collecting in bottom of freezer !! no leaks visible !! water must be coming from ice maker system ?? 1/4 inch by 8x8 piece will collect in bottom area of freezer and then run on to floor. only place ice water is at bottom of back panel above air vent at bottom of removable panel just above air vent. looks like a leak some where behind panel that cannot be seen , any advice will be welcome.
thanks Lee
For model number FFHS2311LWA
Hi Lee, thank you for your question. There are a few parts that you could check for this issue. Your ice maker being one of them. You may also want to check your tubing and your water inlet valve as well. You may want to check your defrost thermostat and heater as well, just to make sure they are not defrosting your freezer too much. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
Lee
May 3, 2019
What is the best directions to install tube extension ???
For model number tubewater ice mold fill ext # 241796405
Hello Lee, thank you for your question. After removing the water line by unscrewing the fitting, You will need to turn the fill tube counter clockwise to about 11:00 and then pull straight out.Next line up the notch on the new fill tube with the tab on the back of the appliance above the hole and insert the tube. Once it is in you turn it clockwise to lock into place.Hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
