Part Location Diagram of WR02X11330 GE Union Connector - 5/16 Inch to 5/16 Inch
See part 80 in the diagram
Replacing your General Electric Refrigerator Union Connector - 5/16 Inch to 5/16 Inch
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.ca

Union Connector - 5/16 Inch to 5/16 Inch

$22.52
  Special Order
PartSelect Number PS758446
Manufacturer Part Number WR02X11330
Manufactured by GE
Product Description

Union Connector - 5/16 Inch to 5/16 Inch Specifications

Quick connector for plastic water line - 5/16" to 5/16"
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos

Replacing your General Electric Refrigerator Union Connector - 5/16 Inch to 5/16 Inch

Replacing your General Electric Refrigerator Union Connector - 5/16 Inch to 5/16 Inch
Troubleshooting
This part fixes the following symptoms:
Leaking | Not dispensing water | Ice maker not making ice
This part works with the following products:
Refrigerator, Water Filter System.
This part works with the following products:
General Electric, Kenmore, Hotpoint, RCA.
Part# WR02X11330 replaces these:
AP3414915, 963908, SWR02X7223, SWR2X7223, WR02X10067, WR02X10471, WR02X12349, WR02X4047, WR02X4048, WR02X7223, WR02X8455, WR02X8545, WR2X10067, WR2X10471, WR2X11330, WR2X4047, WR2X4048, WR2X7223, WR2X8455, WR2X8545
Back to Top
Customer Repair Stories
 Average Repair Rating: 3.7 / 5.0, 30 reviews. What's this?
  • 1
  • 2
  • 3
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Internal water lines brittle, cracked, leaking
First of all, the larger white plastic tubes in this thing are 5/16" OD, which no plumbing store seems to stock. At the lower left rear end there are 2 tubes, one for water and one for ice, that are doomed to fail being in proximity of a heat source - they essentially get cooked to the point of becoming brittle and cracking. The smaller tube and union can be easily found, but do yourself a favor if the larger one cracks and order the plastic tube and water tube union here, and just cut off the brittle part and amend the old tube using the union.
Other Parts Used:
Plastic Tubing - 5/16 Inch
  • Marty from West Bloomfield, MI
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Wrench (Adjustable)
118 of 136 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Leaking water
Plastic lines to ice maker and water dispenser cracked from heat. Replaced Icemaker line by removeing 2 screws holding Icemaker then two more holding icemaker mount, Pulled large plastic tube that water runs down. From back of unit removed grommet that goes thru refrigerator back, then bent open clamp and pulled out 1/4 " line. Reversed process to install.
After doing this I believe it could all be done from the back with out removing the icemaker. Just pry open the clamp on the grommet and pull the 1/4" icemaker line out of the grommet.

The water supply tube was a a little challenge. The 5/16 tube comes thru at the bottom of the fridge under the meat bin. Remove the meat bin and the next bin up to gain access. I cut the tube off with a side cutters about 1/2 of the way between the floor of the fridge and the water tank. Then I took the new line and attached the old line to the new line with a bolt of the correct od with the head cut off so I could tie the two lines together. Then I pulled the old line out from the back of the fridge while pushing the new line in. Attached the line from the tank to the new line with the Water tube union then cut the line off in the back and installed a new Dual inlet valve and the icemaker, drinking water line and supply line to it. Let it sit over night making ice and made sure no leaks before pushing back.
Other Parts Used:
Dual Inlet Water Valve Icemaker Water Line Plastic Tubing - 5/16 Inch
  • James from Richfield, WI
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Screw drivers, Wrench set
58 of 70 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water Leaking @ Quick Releases (Blue and White)
Had previously replace the plastic Water Tank, but when installing it I didn't realize how the quick connects worked. Instead of simply pushing inward in the direction of the blue part of the disconnect, I had pulled out the white ring on the outside of the disconnects. This ruined the inside connections and caused them to leak thus requiring these repairs. Had I known that I wouldnt have bought these parts too. Just Always REMEMBER to push in outside white ring on the quick disconnect and as you push it in pull out the hose when you remove it. To put the hose back in, just push it back in without pushing on ring this time at all and it will lock in place, and shouldn't be leaking. I had to run water into a glass to test if it was leaking, otherwise the line had no water pressure.
Other Parts Used:
WATER VALVE WITH GUARD
  • randy from vancouver, WA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers, Wrench set
57 of 70 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water dispenser leaked - tubing broke
Ordered parts from another vendor - got wrong parts (1/4 in parts instead of 5/16 in parts). With your parts, I just cut out the bad portion of the tubing, and replaced it using the 2 union connectors. Thanks.
Other Parts Used:
Plastic Tubing - 5/16 Inch
  • Thomas from Poway, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
48 of 65 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water was leaking from back of fridge. Not able to use icemaker
This problem had already occurred in 2008. Repairman replaced dual water valve. Cost $190.00. We decided to do it ourselves this time. The repairs were actually made in three phases. First, when I pulled the fridge out from the wall, unplugged it, and turned the water valve back on I discovered that the plastic tubing from water supply into the fridge had long cracks in it and water was spraying out everywhere. I turned water off, went to Lowe's and bought the kit for that repair. Of course I didn't have to use all of the parts in the kit because the water supply was already there from the valve that came up through the floor. After turning the water back on and plugging the fridge back in, my husband and I tested it by trying the water dispenser. We found that water was leaking from somewhere inside the fridge, but didn't know where. After UNPLUGGING it, and turning the water off again, I took the metal back off at the bottom. It was leaking from the bigger plastic tubing (5/16"). It was just hanging, not connected into the dual water valve. Figured it had just broken. So I thought I just needed 5/16" tubing. I went on the GE website and it was very hard to get answers to my problem because I couldn't find the plastic tubing that it looked like. I ended up ordering the plastic tubing that goes up that back of the fridge to the icemaker. They sent me two of those, not one for the freezer and the bigger clear one (5/16") that I thought I needed. Then, I found this website! This PartSelect website is great!! After reading about other consumer repairs, I knew how to disconnect the dual water valve and found out that the smaller plastic tubing that goes up the back of the fridge to the icemaker had been pinched where it connects to the dual water value, barley hanging on. Just quick disconnected it from the valve by pushing up on the outside where the tubing comes out while pulling on the tubing. It came out, and I had to use needle nose pliers to pull some of it out where it had broken off inside. Then, pushed the new tubing into the valve and ran it up the back of the fridge, unscrewed the plate that goes over the clamp that holds the tubing, loosened the clamp a little, pulled the old tubing out, pushed the new tubing in, (the clamp was still tight enough) put the metal plate back on and replaced the screws. Then I re-connected the dual water valve to the electric clips, connected the 5/16" tubing to the right side of the valve. (The black tubing that goes up the back of the fridge goes into the left side of the valve.) put it back into place and screwed it back against the body of the fridge where it goes, put the back on and plugged it back in. We tested it again, and water was leaking, but not from where I made my first repair. I reversed everything again, and discovered that where the 5/16" tubing goes into the dual water value, it seemed more loose than it should have been. That is where the water was leaking from! I ordered the dual water valve, the 5/16" plastic tubing and the water tube union. I replaced the dual water valve-very easy! MAKE SURE YOU UNPLUG THE FRIDGE, turn the water supply off, disconnect the small tubing from the dual water valve, disconnect the electric connections to the valve, and reverse the process. What I did was replace the 5/16" tubing the comes out of valve & goes up into the storage tank behind crisper drawer. Used union there. Put everything back together and it works!!
Other Parts Used:
Dual Inlet Water Valve Plastic Tubing - 5/16 Inch
  • Laura from Zanesville, OH
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers
30 of 37 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken water line near solonoid to feed drinking water
bought an push in, in line connector and a new 5/16 plastic hose. I just replaces 2 feet of plastic hose from the selonid up an splices the hose using the connector. Worked perfect.
Other Parts Used:
Plastic Tubing - 5/16 Inch
  • Gregory from Yucca Valley, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
20 of 29 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water leaking into Freezer from Ice Maker
Disregard previous.
1. Turn off water supply.
2. Unplug power cord.
3. Remove bottom Panel to access the Solenoid valve.
4. Remove the water lines from the Valve.
5. Remove the Valve from the refrigerator.
6. Remove the electrical connectors from the valve.
(make sure the new valve has the connector adaptors included) you will need them during installation.
7.Bend the new valve bracket inward about 45 degrees to clear the compressor coolant line.
8.Use a pair of pliers to braek away the plastic on the new valve for clearance.
9.If needed remove the compression fitings from the old water line installation as the new valve comes with the push and lock feature.
10.Install the bottom 2 water lines they are different sizes
11.Mount the new valve to refrigerator and tighten.
12.Install the ice maker water line to the top fitting on the valve.
13.Plug the power cord in & turn on the water supply,check for leaks and proper operation on the valve.
Other Parts Used:
Water Tubing Clip Dual Inlet Water Valve Plastic Tube - 1/4 Inch 1/4 Tubing Nut Icemaker Fill Hose Extension Fill Tube Clamp
  • Louis from Kingwood, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers, Wrench (Adjustable)
19 of 38 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water line to Dispenser Broke& Ice Maker Clip
Super simple... removed pnl in back connected the splice, added the new house, replaced the clip in the Ice Maker Tray....
Other Parts Used:
Refrigerator Ice and Water Filter Ice Dispensing Drive Cup Plastic Tubing - 5/16 Inch
  • John from Redondo Beach, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver
18 of 33 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Moving the refrigerator into my new (very old) house we had to remove the doors which resulted in a crimped hose and union
Remove lower front panel, disconnect damaged union from water hose under freezer door, replace with new union, tighten and reattach front panel. No more water coming from under the unit. Ice maker and dispenser features returned to working order!
Other Parts Used:
  • Laura from Manchester, NH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
16 of 28 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
My 13 yr grandson assisted me on this
We couldn't get the other connector loose from one end of the tubing so he said just cut it and so we did and attached the connector. I now have water again in my fridge and took the sticky note down "don't use the water" as it had leaked for a year...... Thanks!
Other Parts Used:
  • Sherry from Auburn Hills, MI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
15 of 17 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
  • 3
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

6 questions answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Joe
November 19, 2018
The water line in the back is brittle and cracked. Can i cut off the bad piece and use 2 unions to repair?
For model number Zfsb23dnd
PartSelect logo
Hi Joe, thank you for your question. Yes you should be able to as long as you make the cuts as straight as you possibly can then you should be able to use unions instead. I hope that helps. Good luck with your repair.

9 people found this helpful.

Was this helpful?
Thank you for voting!
Delores
March 10, 2018
Ice maker works but no water can be dispensed.
For model number GSH25JGDBCC
PartSelect logo
Hello Delores, Thank you for your inquiry. We would recommend checking the following parts to fix your issue: dual water inlet valve, dispenser solenoid assembly, dispenser micro switch, water filter housing with tubing, union connector and make sure that none of the tubes are frozen, cracked or clogged. Hope this helps!

3 people found this helpful.

Was this helpful?
Thank you for voting!
William
May 16, 2019
How can replacing this connector solve my problem of no water coming from the front door.? all it does is connect the two hoses correct? please advise
For model number GSS20GSDBSS
PartSelect logo
Hello William, thank you for writing back. If the Union Connector is damaged, clogged or defective, it could prevent the water from being transferred. Yes, it connects two hoses.

1 person found this helpful.

Was this helpful?
Thank you for voting!
William
May 22, 2019
How can the union connector part # wr02x11330 stop water flow to the door of the frig.Doesn't it just connect the two water lines with no blockage of any type. you say this part might be my problem to no water at the door but before i purchase it from you i would like to know your thoughts. thanks
For model number GSS20GSDBSS
PartSelect logo
Hello William, Thank you for the question. If the Union Connector is damaged and cutting off flow, clogged or defective, it could prevent the water from being transferred. If there is no visible dame or wear then the union is fine. Thank you for your inquiry, good luck with this repair!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Nanette
September 16, 2019
Will these work to fix my water line that comes thru the bottom of the fridge to the front dispenser? The line got brittle and leaked. We found replacement tubing but not the connectors.
For model number PSHF6TGXBDWW
PartSelect logo
Hello Nanette, thank you for inquiring. Yes, this is the replacement you are looking for on your model. Good luck with your repair!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Lucille
February 7, 2020
How to replace water line in freezer?
For model number GSH25SGRBSS
PartSelect logo
Hi Lucille. Please watch our video here: https://www.youtube.com/watch?v=u069bgnLrKM. Thank you for your question and good luck with your repair.

1 person found this helpful.

Was this helpful?
Thank you for voting!
  • 1
;
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS758446
Manufacturer Part Number: WR02X11330
Brand
Model Number
Description
Kenmore
36350221000
Refrigerator
Kenmore
36350222000
Refrigerator
Kenmore
36350227000
Refrigerator
Kenmore
36350232000
Refrigerator
Kenmore
36350237000
Refrigerator
Kenmore
36350242000
Refrigerator
Kenmore
36350247000
Refrigerator
Kenmore
36350622000
Refrigerator
Kenmore
36350627000
Refrigerator
Kenmore
36357552790
Refrigerator
Kenmore
36357552791
Refrigerator
Kenmore
36357557790
Refrigerator
Kenmore
36357557791
Refrigerator
Kenmore
36358062890
Refrigerator
Kenmore
36358062891
Refrigerator
Kenmore
36358062892
Refrigerator
Kenmore
36358062893
Refrigerator
Kenmore
36358062894
Refrigerator
Kenmore
36358062896
Refrigerator
Kenmore
36358062897
Refrigerator
Kenmore
36358067890
Refrigerator
Kenmore
36358067891
Refrigerator
Kenmore
36358067892
Refrigerator
Kenmore
36358067893
Refrigerator
Kenmore
36358067894
Refrigerator
Kenmore
36358067897
Refrigerator
Kenmore
36358072891
Refrigerator
Kenmore
36358072892
Refrigerator
Kenmore
36358072893
Refrigerator - Kenmore Refrigerator Model 363.58072893 (36358072893, 363 58072893) Parts
Kenmore
36358072894
Refrigerator
Customer Service Representative

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service