Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Michael L - December 5, 2018
Verified Purchase
Easy repair and part worked perfectly
Easy to install, and dishwasher works like new!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Tripp
August 6, 2019
This dishwasher has power, when the knob is turned to start the washer starts but the machine doesn't cycle, if i manually advance the knob to wash, it will wash but it won't auto advance to though the cycle. Is this the timer ?
For model number GSD3300K00BB
Hello Tripp, thank you for your question. Yes, that is most likely a timer issue. Anytime you can advance the timer and it works, the timer is usually at fault. I hope this helps!
6 people found this helpful.
Was this helpful?
Thank you for voting!
William
October 5, 2021
Will not drain, installed new pump and motor. Kick in to drain but doesn't.
For model number GSD3300K00BB
Hello William, Thank you for the question. If all the drain hoses where checked for blockage and clogs, we suggest checking the Drain Solenoid. This valve opens in order for the water to drain out of the dishwasher. You can also test the part with a Multimeter. When your multi-meter is set the R x 1 setting, place each of the meter's probes on one terminal each. When the probes touch the terminals, the reading should change from a reading of infinity to a reading of approximately 40 ohms. If you receive a reading of infinity, or a reading that is no where near 40 ohms, then you will need to replace the solenoid. We hope this helps!
Would this part fix the dishwasher not draining? We have noticed that the cycle knob thet is connected to the timer no longer spins around. We can manually turn it but it will not drain. It will fill up and that’s it. Your input would be very appreciated. Thank you
For model number GZSC3500D55WW
Hi Rod, thank you for your inquiry. Based on the description that you have provided, the issue is most likely with the timer, part number PS6011664, which may need to be replaced. We hope this sorts out your problem!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Arthur
December 29, 2023
A couple of weeks ago I installed a new drain solenoid because the old one melted. New one from Parts Select. Last night the new one melted, could the timer control cause this ? I'm desperate.
For model number GSC3500D35WW
Hi Arthur, thank you for getting in touch. Yes, the issue could be with the timer, part number PS6011664. It manages the various functions of the dishwasher, such as filling, washing, draining and drying. You may need to replace it to fix the issue. We hope this solves your problem!
Was this helpful?
Thank you for voting!
Leanne
November 24, 2019
Does part 904 work as the timer matching 165d548p014
For model number GSC3500D35WW
Hello Leanne, thank you for your question. Yes, the timer PartSelect Number: PS6011664 is correct for that unit. Good luck with your repair!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.