This part turns the light on/off as the door opens and closes.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Light not working
This part works with the following products:
Refrigerator, Freezer.
This part works with the following products:
Frigidaire, Gibson, Kelvinator, Kenmore.
Part# 5303289051 replaces these:
AP2143984, 1193, 06594776, 06594777, 06599776, 08000729, 09918810, 3001228, 5303208475, 5303272130, 5306594777, 5309918810, 6594776, 6594777, 6599776, 8000729, 9918810, F111270, F111271, F99869
...
Show more
, G000149762, G148353, G148354, G149762, G149763, G152821, G157018, K1235123, R000111270, R000901039
Show less
Customer Repair Stories
Average Repair Rating: 5.0 / 5.0, 1 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Light wouldn't turn on when door opened
Unplugged fridge, opened the door, used flat head screwdriver to pop off old switch, unplugged wires, plugged in new switch, popped it back in, and plugged the fridge back in. 2 minute fix.
Other Parts Used:
Matthew from SOUTH BEND, IN
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Barry
August 3, 2017
I can get the freezer door's light switch loose from the panel but there appears to be insufficient wiring slack to enable me to pull the switch out of the hole. Should I disassemble the control panel to remove the switch?
For model number FRS20ZRGW6
Hi Barry,
Thank you for the question! If you take a small flat head screw driver and pry the switch from the hole enough to use the head of the screw driver to push down on the clips that hold it in place, you should be able to pull the switch from the hole no problem and disconnect the plug. Perhaps the wires are snagged? If this is the case you may have to disassemble the control panel to get to the back to disconnect the wire this way.
Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
